EN 60684-3-420 TO 422-2002 en Flexible Insulating Sleeving - Part 3 Specifications for Individual Types of Sleeving - Sheet 420 to 422 Polyethylene Terephthalate Textile Sleeeving .pdf

《EN 60684-3-420 TO 422-2002 en Flexible Insulating Sleeving - Part 3 Specifications for Individual Types of Sleeving - Sheet 420 to 422 Polyethylene Terephthalate Textile Sleeeving .pdf》由会员分享，可在线阅读，更多相关《EN 60684-3-420 TO 422-2002 en Flexible Insulating Sleeving - Part 3 Specifications for Individual Types of Sleeving - Sheet 420 to 422 Polyethylene Terephthalate Textile Sleeeving .pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 422:2002 60684-3-420 to Flexible insulating sleeving Part 3 : Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating The European Standard EN 60684-3-420 to 422:2002 has the status of a British

2、 Standard ICs 29.035.20 British Standards NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 60684-3420 to 42212002 National foreword This British Standard is the official English language version of EN 60684-3420 to 422:2002. It is identical with IEC 60684-3420 to 422:2002

3、. It supersedes BS 6893-3420 to 422:1995 which is withdrawn. The UKparticipation in its preparation was entrusted by Technical Committee GELAS, Insulating material, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: This British Standard, having been prepared under t

4、he direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 August 2002 - - aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the int

5、erpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC public

6、ations have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period oftime during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which imp

7、lement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search”faci1ity ofthe BSI Electronic Catalogue or of British Standards Online. This publication doe

8、s not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN t

9、itle page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd.No. I Date I Comments O BSI 30 August 2002 ISBN O 580 40298 3 EUROPEAN STANDARD NORME EUROP .ENNE EU

10、ROPfISCHE NORM EN 60684-3-420 to 422 Julv 2002 ICs 29.035.20 Supersedes HD 523.3.420 to 422 S1:1993 English version Flexible insulating sleeving Part 3: Specification for individual types of sleeving Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (I EC 6068

11、4-3-420 to 42212002) Gaines isolantes souples IsolierschI%diche Partie 3: Spcification pour types particuliers de gaines Feuilles 420 $422: Gaines en trphtalate de polythylne tisses Teil 3: Anforderungen far ei nzel ne Sch lauch typen Bl%otter420 bis 422: PET-TextilschI%ouche m it Acryl besc h ich t

12、 u n g avec revi tement acrylique (CE1 60684-3-420 to 42212002) (IEC 60684-3-420 to 42212002) This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard th

13、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Ge

14、rman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the oficial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech R

15、epublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechn

16、ique EuropYkches Komitee f, r Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels O 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60684-3-420 to 422:2002 E Page 2 EN 60684-3-420 TO 422 Forew

17、ord The text of document 15C/1350/FDIS, future edition 2 of IEC 60684-3-420 to 422, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60684-3-420 to 422 on 2002-07-01. This European Standard supers

18、edes HD 523.3.420 to 422 SI :I 993. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement latest date by which the national standards conflicting with the EN have to be withdrawn Annexes

19、designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. En dorse ment not i ce (dop) 2003-04-01 (dow) 2005-07-01 The text of the International Standard IEC 60684-3-420 to 422:2002 was approved by CENELEC as a European

20、Standard without any modification. Page 3 EN 60684-3-420 TO 422 INTRODUCTION This International Standard is one of a series which deals with flexible insulating sleeving for electrica I purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); Part 2:

21、Methods of test (IEC 60684-2); Part 3: Specification for individual types of sleeving (IEC 60684-3) This standard contains three of the sheets comprising Part 3, as follows: Sheet 420: Sheet 421: Sheet 422: Polyethylene terephthalate textile with acrylic based coating: high breakdown voltage Polyeth

22、ylene terephthalate textile with acrylic based coating: medium break- down voltage Polyethylene terephthalate textile with acrylic based coating: low breakdown voltage Page 4 EN 60684-3-420 TO 422 FLEXIBLE INSULATING SLEEVING - Part 3: Specification for individual types of sleeving - Sheets 420 to 4

23、22: Polyethylene terephthalate textile sleeving with acrylic based coating 1 Scope This International Standard gives the requirements for three types of sleeving constructed from polyethylene terephthalate yarns using either braided or knitted construction, with a continuous acrylic based coating an

24、d differentiated by their breakdown voltage: high breakdown voltage (sheet 420), medium breakdown voltage (sheet 421) and low breakdown voltage (sheet 422). The sleeving is normally available with internal diameters between 0,5 mm and 25 mm and is normally supplied in the following colours: black, y

25、ellow, brown, blue and red. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in tables 2 and 4. Experience of product performance

26、indicates that sleeving of the types specified in these sheets may be suitable for operation at 130 “C or in some applications at temperatures up to 155 “C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only th

27、e edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60684-1 :I 980, Specificafion for flexible insulafing sleeving - Parf 1: Definifions and general requiremenfs IEC 60684-2:1997, Flexible insulafing sleeving - Parf 2

28、: Mefhods of fesf IEC 60757:1983, Code for designafion of colours 3 Designation The sleeving shall be identified by the following designation: Page 5 EN 60684-3-420 TO 422 Description 7 IEC publication - Number SJ 1- - Part - Sheet Size (nominal internal diameter in mm) Sleeving IEC 60684 - 3 - 420

29、- 8 - U - GN - braided - * B indicates bilateral tolerance; U indicates unilateral tolerance Any abbreviation used for colour shall comply with IEC 60757. NC is used for ”Natural Colour”/ ”No Colour pigmentation”. Where no abbreviation is given, the colour shall be written in full. 4 Requirements In

30、 addition to the general requirements given in IEC 60684-1, the sleeving in the sizes normally available shall comply with the requirements in tables 1, 2 and 4. Page 6 EN 60684-3-420 TO 422 5 Sleeving conformance Conformance shall normally be based on results from 10 mm black sleeving. Table 1 - Di

31、mensional requirements Nominal bore di ameter mm Tolerance on bore diameter mm Bilateral 0,15 0,15 0,15 0,15 0,15 0,15 0,25 0,25 0,25 0,50 0,50 0,50 0,50 0,50 0,50 0,50 Uni I ateral 0,30 0,30 0,30 0,30 0,30 0,30 0,50 0,50 0,50 1 ,o0 1 ,o0 1 ,o0 1 ,o0 1 ,o0 1 ,o0 1 ,o0 Sheet 420 Min 0,25 0.25 0,25 0,

32、35 0,35 0,40 0,40 0,50 0,50 0,50 0,50 0,65 0,65 0,65 0,65 0,65 Max 0,50 0,60 0,75 0,75 0,75 0,75 0,80 0,80 1 ,o 1 ,o 1 ,o 1,lO 1,lO 1,lO 1,20 1,20 Wall thickness mm Sheet 421 Min 0,20 0,20 0,20 0,20 0,20 0,20 0,20 0,30 0,30 0,30 0,30 0,40 0,40 0,40 0,40 0,40 Max Sheet 422 Min 0,15 0,15 0,15 0,15 0,1

33、5 0,15 0,15 0,20 0,20 0,20 0,20 0,40 0,40 0,40 0,40 0,40 Max Sleeving with a non-standard internal diameter shall have a wall thickness at least as large as the next largest standard size. Sleeving with a non-standard internal diameter less than 0,5 mm shall have a wall thickness that meets the requ

34、irements of the 0,5 mm internal diameter sleeving. Page 7 EN 60684-3-420 TO 422 Max. or ,in, _ Max. _ Table 2 - Standard requirements Requirements Sheet 420 Sheet 421 Sheet 422 Remarks Table 1 Table 1 Table 1 Measure to the nearest 0,05 mm. Pass Pass Pass Only for sleeving having a nominal bore diam

35、eter up to and including 5 mm. 20 min and the temperature 180 “C f 3 K. For all sheets, there shall be no Test temperature: visible cracking or detachment of 155 “C f 3 K. Mandrel coating, and the original colour shall diameters are given in 5 5 5 The time of test shall be be clearly recognizable. t

36、able 3. Property 1 o3 Dimensions 1 o3 1 o2 Resistance to soldering heat Longitudinal change Bending after heating I EC 60684-2 clause or subclause 3 7 9 13 Units mm _ % _ Bending at low temperature 14 For all sheets, there shall be no visible cracking or detachment of coating. Test temperature not a

37、bove -15 “C. Mandrel diameters are given in table 3. Hydrolysis of coating Breakdown voltage 17 21 For all sheets, there shall be no running of the coating, adherence between sleeving and paper or between the pieces of sleeving, or any sign of discolouration of the paper. Method given in 21.2 of IEC

38、 60684-2 shall not be used with nominal bore diameters exceeding 3 mm. I nsu lati on res istance - at room temperature 22 22.4.2 MR Min. Page 8 EN 60684-3-420 TO 422 Table 3 - Mandrel diameters for bending tests Nominal bore di ameter mm Mandrel diameters rnm Aft er h e a ti n g 3 4 5 6 8 10 12 15 1

39、8 21 27 33 40 6 6 6 At low temDerature 3 4 5 6 8 10 12 15 18 21 6 6 6 6 6 6 Page 9 EN 60684-3-420 TO 422 Breakdown voltage sha ,e c,.armined at room temperature, elevated temperature and after damp heat by one of the methods given in the following table 4. The rate of application of voltage shall be

40、 500 V/s or such that the required breakdown value is reached between 10 s and 20 s. The test at elevated temperature shall be carried out at 155 OC f 3 K. Table 4 - Requirements for breakdown voltage Breakdown voltage test method I EC 60684-2 subclause Shot bath 3r straight mandrel, 100 mm electrod

41、e Room temperature Elevated temperature Damp heat 21.2 21.3 21.1 21.5 21.6 Minimum breakdown voltage I kV I Sheet 420 Central value Lowest value Sheet421 I Sheet422 I Central value Lowest value Page 10 EN 60684-3-420 TO 422 Annex ZA (normative) Normative references to international publications with

42、 their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent ame

43、ndments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE EN/HD applies. When an international publication h

44、as been modified by common modifications, indicated by (mod), the relevant Publication Yearm EN/HD Year IEC 60684-1 1980 Specification for flexible insulating EN 60684-1 1995 sleevi ng Part 1 : Definitions and general requirements IEC 60684-2 1997 Part 2: Methods of test EN 60684-2 1997 IEC 60757 19

45、83 Code for designation of colours HD 457 SI 1985 BS EN 422:2002 60684-3-420 to B SI 389 Chiswick High Road London w4 4AL BSI -British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the int

46、ernational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services.

47、 We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members

48、 an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20

49、8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its pr