EN 60598-2-11-2005 en Luminaires Part 2-11 Particular requirements C Aquarium luminaires (Incorporating Corrigendum August 2005 Remains Current)《照明设备 第2-11部分 特殊要求 水族箱灯具 合并勘误表2005年8.pdf

《EN 60598-2-11-2005 en Luminaires Part 2-11 Particular requirements C Aquarium luminaires (Incorporating Corrigendum August 2005 Remains Current)《照明设备 第2-11部分 特殊要求 水族箱灯具 合并勘误表2005年8.pdf》由会员分享，可在线阅读，更多相关《EN 60598-2-11-2005 en Luminaires Part 2-11 Particular requirements C Aquarium luminaires (Incorporating Corrigendum August 2005 Remains Current)《照明设备 第2-11部分 特殊要求 水族箱灯具 合并勘误表2005年8.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60598-2-11:2005 Luminaires Part 2-11: Particular requirements Aquarium luminaires The European Standard EN 60598-2-11:2005 has the status of a British Standard ICS 29.140.40 BS EN 60598-2-11:2005 ISBN 0 580 46395 8 National foreword The UK participation in its preparation was

2、entrusted by Technical Committee CPL/34, Lamps and related equipmnent, to Subcommittee CPL/34/4, Luminaires, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change

3、, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Europ

4、ean publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include al

5、l the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10,

6、an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments This British Standard is the official English language version of EN 60598-2-11:2005, including Corrigend

7、um August 2005. It is identical with IEC 60598-2-11:2005. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006EUROPEAN STANDARD EN 60598-2-11 NORME EUROPENNE EUROPISCHE NORM June 2005 CENELEC European Committee for Electrotec

8、hnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. E

9、N 60598-2-11:2005 E ICS 29.140.40 Incorporates Corrigendum August 2005English version Luminaires Part 2-11: Particular requirements Aquarium luminaires (IEC 60598-2-11:2005) Luminaires Partie 2-11: Rgles particulires - Luminaires pour aquarium (CEI 60598-2-11:2005) Leuchten Teil 2-11: Besondere Anfo

10、rderungen - Aquarienleuchten (IEC 60598-2-11:2005) This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without an

11、y alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

12、e by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finlan

13、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 60598-2-11:2005 2 Foreword The text of document 34D/833/FDIS, future edition 1 of IEC 60598

14、-2-11, prepared by SC 34D, Luminaires, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60598-2-11 on 2005-06-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publicat

15、ion of an identical national standard or by endorsement (dop) 2006-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-06-01 This European Standard should be used in conjunction with the latest edition of and any amendments to EN 60598-1: Luminai

16、res Part 1: General requirements and tests. The contents of the corrigendum of August 2005 have been included in this copy. _ Endorsement notice The text of the International Standard IEC 60598-2-11:2005 was approved by CENELEC as a European Standard without any modification. _ 3 EN 60598-2-11:2005

17、CONTENTS INTRODUCTION 4 11.1 Scope .5 11.2 General test requirements .5 11.3 Definitions .5 11.4 Classification of luminaires 6 11.5 Marking .6 11.6 Construction 7 11.7 Creepage distances and clearances 8 11.8 Provisions for earthing.8 11.9 Terminals and electrical connections .8 11.10 External and

18、internal wiring .8 11.11 Protection against electric shock .8 11.12 Endurance tests and thermal tests .8 11.13 Resistance to dust, solid objects and moisture .9 11.14 Insulation resistance and electric strength .9 11.15 Resistance to heat, fire and tracking 9 Annex A (normative) Requirements for the

19、 protective shield to be fitted to luminaires using metal halide lamps for protective measures against UV radiation .10 EN 60598-2-11:2005 4 INTRODUCTION Aquarium luminaires are predominantly used on the topside of an aquarium tank to achieve an effective illumination and are, therefore, very close

20、to the water inside the tank. Because of the constant refilling of water as a consequence of evaporation and regular servicing, e.g. feeding the fish, it is necessary to open the cover above or to remove the aquarium luminaire frequently in order to have a good and sufficient access to the water sur

21、face. The requirements of this standard are necessary to prevent any dangerous contact between current-carrying parts of the aquarium luminaire and the water inside the tank during refilling or maintenance. Another aspect is to prevent any accidental immersion of the aquarium luminaire into the wate

22、r. 5 EN 60598-2-11:2005 LUMINAIRES Part 2-11: Particular requirements Aquarium luminaires 11.1 Scope This part of IEC 60598 specifies requirements for household aquarium luminaires for use with tungsten filament, tubular fluorescent or other discharge lamps on supply voltages not exceeding 1 000 V.

23、NOTE In the U.S., electrical equipment used on or in aquariums shall be supplied by voltages not exceeding 300 V. 11.2 General test requirements The provisions of section 0 of IEC 60598-1 apply. The tests described in each appropriate section of IEC 60598-1 shall be carried out in the order listed i

24、n this part of IEC 60598. 11.3 Definitions For the purpose of this document the definitions given in IEC 60598-1 together with the following definitions apply: 11.3.1 aquarium luminaire luminaire intended to illuminate the inside of an aquarium and which is placed in close proximity of the top of th

25、e tank or in/on the tank 11.3.2 non-permanently attached luminaire luminaire which can be positioned on top of an aquarium tank, or on a removable top cover frame or on a fixed top cover frame, and which is removable by hand NOTE Non-permanently attached aquarium luminaires might contain provisions

26、for fixing. 11.3.3 permanently attached luminaire luminaire which is mounted on the tank of the aquarium or on a fixed top cover frame of the aquarium and which is only removable by the use of a tool NOTE Luminaires and their parts may be mounted separately by the user. 11.3.4 independently suspende

27、d aquarium luminaire luminaire (pendant), not permanently attached to the tank 11.3.5 removable top cover frame outside frame which is mounted on the top of the aquarium tank and may be removed by hand. NOTE A removable top cover frame can contain other parts necessary for fixing additional accessor

28、ies. EN 60598-2-11:2005 6 11.3.6 fixed top cover frame outside frame which is fixed on top of the aquarium tank, and the removal of which is only possible by use of a tool NOTE A fixed top cover frame might contain parts necessary for fixing additional accessories. 11.3.7 aquarium complete system, i

29、ncluding a tank, an aquarium luminaire and if applicable a top cover frame 11.4 Classification of luminaires Luminaires shall be classified in accordance with the provisions of Section 2 of IEC 60598-1. 11.5 Marking The provisions of Section 3 of IEC 60598-1 apply, together with the following requir

30、ements (see Table 1). Table 1 Markings Markings belonging to a) Markings belonging to b) Markings belonging to c) 11.5.1 Distance 11.5.2 External parts 11.5.3 Disconnect supply NOTE a), b) and c) refer to the categories of markings outlined in 3.2 of IEC 60598-1. 11.5.1 Information shall be provided

31、 and/or the following symbol (see Figure 1) concerning the minimum distance to the maximum water level of the aquarium shall be marked on the luminaire if it is possible (by the design of the aquarium) that water can reach the luminaire. The minimum distance shall be at least 15 mm. Figure 1 Minimum

32、 distance from water level symbol 11.5.2 Portable external parts, e.g. ballast units, shall be marked with a warning based on the following wording: ”Shall not be positioned on or into the cover frame”, if the protection against ingress of moisture is lower than IPX7. 11.5.3 Aquarium luminaires shal

33、l be marked with an outside visible instruction based on the following wording: “Disconnect supply before opening the luminaire for maintenance”. 11.5.4 If the permanently attached luminaire is delivered separately from the aquarium and intended for direct mounting on the wall of the tank, the manuf

34、acturer has to give an information in the instructions regarding the permissible thickness of the wall of the aquarium tank. 7 EN 60598-2-11:2005 11.6 Construction The provisions of Section 4 of IEC 60598-1 apply, together with the requirements of 11.6.1 to 11.6.5. 11.6.1 Non-permanently attached aq

35、uarium luminaires shall have protection against ingress of moisture of at least IPX7. Only class III non-permanently attached aquarium luminaires where the working voltage does not exceed 12 V r.m.s. can be positioned in contact with or submersible in water. 11.6.2 If it is necessary to remove a per

36、manently attached aquarium luminaire or the fixed top cover frame for maintenance of the aquarium, or for replacement of the lamp, or if the tank does not have suitable drainage apertures or a cut-off mechanism, the luminaire shall have a protection against ingress of moisture of at least IPX7. A su

37、itable drainage aperture will prevent overfilling of the tank and immersion of a luminaire and will maintain the maximum water level of the tank at a distance to the luminaire of at least 15 mm. If a permanently attached aquarium luminaire, in compliance with the previous paragraph is used in a tank

38、 with suitable drainage apertures or a cut off mechanism, the protection against ingress of moisture shall be at least IP X4 for all surfaces of the luminaire which face the water. For the other surfaces of the luminaire the protection against ingress of moisture can be reduced to at least IP X2, if

39、 one of the following situations apply: the whole of the top of the tank is covered, and the luminaire is in its intended operating position (closed tank); during refilling, the permanently attached aquarium luminaire has to be moved to a position where a 10x10cm minimum access to the water is given

40、 (open tank); during refilling, by the position of the luminaire, water splashes are prevented from making contact with the surface of the luminaire. 11.6.3 Portable external parts mounted in the supply cable, for example switches or ballast units, need not comply with the IP rating of the luminaire

41、 if the cable length between the luminaire and electrical part is at least 1,0 m and the cable length between those electrical parts and the supply connector is not greater than 0,5 m. 11.6.4 Provision shall be made to prevent a permanently attached aquarium luminaire (see 11.3.3 note) becoming unfi

42、xed. Compliance shall be by the following test. For a luminaire which is intended for direct mounting of the wall of the tank a force is applied to the fixing mechanism for 1 min in the most onerous direction. During the test the fixing mechanism is mounted on test aquarium “walls” made of ordinary

43、window glass, with the minimum and maximum thickness as specified by the manufacturer. The fixing mechanism shall not start moving on the glass at a pull of 20 N. 11.6.5 If the luminaire is fitted with a switch, the switch shall be a double pole disconnection construction, except for class III lumin

44、aires. EN 60598-2-11:2005 8 11.7 Creepage distances and clearances The provisions of Section 11 of IEC 60598-1 apply. Luminaires of this part of IEC 60598 are intended for use in applications in line with impulse withstand category II. 11.8 Provisions for earthing The provisions of Section 7 of IEC

45、60598-1 apply. 11.9 Terminals and electrical connections The provisions of Sections 14 and 15 of IEC 60598-1 apply. 11.10 External and internal wiring The provisions of Section 5 of IEC 60598-1 apply, together with the requirements of 11.10.1 to 11.10.3. 11.10.1 Aquarium luminaires shall be provided

46、 with a fixed flexible cable and a plug for connection to the power supply. The length of the cable shall be at least 1,5 m, unless the requirements of 11.6.3 apply. 11.10.2 The plug of the power supply cord of an aquarium luminaire is not required to have the same degree of protection as the lumina

47、ire if other than IP2X. 11.10.3 For aquarium luminaries other than ordinary, If the luminaire has been clearly specified as suitable for indoor use only, flexible cables or cords used as a means of connection to the supply can be made from PVC (as per ordinary luminaires). 11.11 Protection against e

48、lectric shock The provisions of Section 8 of IEC 60598-1 apply. 11.12 Endurance tests and thermal tests The provisions of Section 12 of IEC 60598-1 apply, together with the requirements of 11.12.1 and 11.12.2 11.12.1 Aquarium luminaires shall be subjected to the relevant tests of Clauses 12.4, 12.5

49、and 12.6 of IEC 60598-1 after the test(s) of Clause 9.2 but before the test(s) of Clause 9.3 of Section 9 of IEC 60598-1 as specified in Clause 11.13 of this part of IEC 60598-2. 11.12.2 A 20 mm thick matt black painted wooden board is used to represent the maximum possible water level. A matt black, painted 20 mm-wide wooden frame is placed onto the board to provide the spacing between the water and the luminaire