EN 60598-1-2008 en Luminaires - Part 1 General requirements and tests (Incorporates Amendment A11 2009 Remains Current)《照明设备 第1部分 一般要求和试验 现行有效》.pdf

《EN 60598-1-2008 en Luminaires - Part 1 General requirements and tests (Incorporates Amendment A11 2009 Remains Current)《照明设备 第1部分 一般要求和试验 现行有效》.pdf》由会员分享，可在线阅读，更多相关《EN 60598-1-2008 en Luminaires - Part 1 General requirements and tests (Incorporates Amendment A11 2009 Remains Current)《照明设备 第1部分 一般要求和试验 现行有效》.pdf（200页珍藏版）》请在麦多课文档分享上搜索。

1、Luminaires Part 1: General requirements and testsBS EN 60598-1:2008Incorporating CENELEC amendment A11National forewordThe UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and related equipment, to SubcommitteeCPL/34/4, Luminaires. This publication does not purpo

2、rt to include all the necessary provisionsof a contract. Users are responsible for its correct application. BSI 200ICS 29.140.40legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on BRITISH STANDARDBS EN 60598-1:2008931 January 200

3、9. on request to its secretary.A list of organizations represented on this subcommittee can be obtainedISBN 978 0 580 65620 0Compliance with a British Standard cannot confer immunity fromAmendments/corrigenda issued since publicationDate Text affectedImplementation of CENELEC amendment A11:2009This

4、British Standard is the UK implementation of EN 60598-1:2008, incorporating A11:2009. It is derived from IEC 60598-1:2008. It supersedes BS EN 60598-1:2004, which will be withdrawn on 12 April 2012.The CENELEC common modifications have been implemented at the appropriate places in the te x t. The st

5、art and finish of each common modification is indicated in the tex t by tags .the tags carry the number of the amendment. F or e x ample, the common modifications introduced by CENELEC amendment A11 are indicated by hi.Where a common modification has been introduced by CENELEC amendment, 30 November

6、 2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM May 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - A

7、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60598-1:2008 E ICS 29.140.40 Supersedes EN 60598-1:2004 + A1:2006English version Luminaires - Part 1: General requirements and tests (IEC 60598-1:2008, modified) Luminaires - Partie 1: Exigence

8、s gnrales et essais (CEI 60598-1:2008, modifie) Leuchten -Teil 1: Allgemeine Anforderungen und Prfungen (IEC 60598-1:2008, modifiziert) This European Standard was approved by CENELEC on 2008-10-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in t

10、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechn

11、ical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland an

12、d the United Kingdom. EN 60598-1:2008+A11- 2 - Foreword The text of document 34D/889/FDIS, future edition 7 of IEC 60598-1, prepared by SC 34D, Luminaires, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote. A draft amendment, prepared by the Technical Committe

13、e CENELEC TC 34Z, Luminaires and associated equipment, covering the needed common modifications towards IEC 60598-1:2008 (34D/889/FDIS) was submitted to the formal vote. The combined texts were approved by CENELEC as EN 60598-1 on 2008-10-21. This European Standard supersedes EN 60598-1:2004 + A1:20

14、06 + corrigendum August 2007. The major changes which may affect certification are given in Annex R. Annex R shows where a new text has been included which contains more serious/critical requirements requiring products to be re-tested. The following dates were fixed: latest date by which the EN has

15、to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-04-12 NOTE In this standard, the following print types are used: requirements: i

16、n roman type; test specifications: in italic type; notes: in small roman type. Annexes ZA, ZB and ZC have been added by CENELEC. _BS EN 60598-1:2008EN 60598-1:2008Foreword to amendment A11 This amendment was prepared by the Technical Committee CENELEC TC 34Z, Luminaires and associated equipment. The

17、 text of the draft was submitted to the formal vote and was approved by CENELEC as amendment A11 to EN 60598-1:2008 on 2009-05-01. The following dates were fixed: latest date by which the amendment has to be implementedat national level by publication of an identical national standard or by endorsem

18、ent (dop) 2009-11-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2009-11-01 _ Endorsement notice The text of the International Standard IEC 60598-1:2008 was approved by CENELEC as a European Standard with agreed common modifications. CONTENTS

19、 SECTION 0: GENERAL INTRODUCTION 0.1 0.2 0.3 0.4 0.5 0.6 SECTION 1: DEFINITIONS 1.1 1.2 SECTION 2: CLASSIFICATION OF LUMINAIRES 2.1 2.2 2.3 Classification according to degree of protection against ingress of dust, solid 2.4 Classification according to material of supporting surface for which the 2.5

20、 SECTION 3: MARKING 3.1 3.2 3.3 3.4 SECTION 4: CONSTRUCTION 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 BS EN 60598-1:200860598-1 IEC:2008 3 Scope and object.10 Normative references 11 General requirements 14 General test requirements and verification .14 Components of luminaires .15 List of parts of IEC 60

21、598-2 .16 General .17 Definitions .17 General .29 Classification according to type of protection against electric shock29 objects and moisture .29 luminaire is designed.30 Classification according to the circumstances of use30 General .30 Marking on luminaires30 Additional information 34 Test of mar

22、king .36 General .37 Replaceable components.37 Wireways.37 Lampholders37 Starter holders.39 Terminal blocks .39 Terminals and supply connections .39 Switches42 Insulating linings and sleeves 42 4.10 Double and reinforced insulation43 4.11 Electrical connections and current-carrying parts .44 4.12 Sc

23、rews and connections (mechanical) and glands45 4.13 Mechanical strength.48 4.14 Suspensions and means of adjustment 51 4.15 Flammable materials .54 4.16 Luminaires for mounting on normally flammable surfaces.55 4.17 Drain holes57 SECTION 5: EXTERNAL AND INTERNAL WIRING 5.1 5.2 5.3 SECTION 6: Not use

24、d SECTION 7: PROVISION FOR EARTHING 7.1 7.2 SECTION 8: PROTECTION AGAINST ELECTRIC SHOCK 8.1 8.2 SECTION 9: RESISTANCE TO DUST, SOLID OBJECTS AND MOISTURE 9.1 9.2 9.3 SECTION 10: INSULATION RESISTANCE AND ELECTRIC STRENGTH, TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT SECTION 11: CREEPAGE DISTANCE

25、S AND CLEARANCES SECTION 12: ENDURANCE TEST AND THERMAL TEST BS EN 60598-1:200860598-1 IEC:2008 4 4.18 Resistance to corrosion .57 4.19 Ignitors58 4.20 Rough service luminaires Vibration requirements 58 4.21 Protective shield 58 4.22 Attachments to lamps 59 4.23 Semi-luminaires.59 4.26 Short-circuit

26、 protection.59 4.24 UV radiation 59 4.25 Mechanical hazard.59 4.27 Terminal blocks with integrated screwless earthing contacts 60 General .60 Supply connection and other external wiring.60 Internal wiring65 General .67 Provision for earthing.67 General .69 Protection against electric shock69 General

27、 .73 Tests for ingress of dust, solid objects and moisture 73 Humidity test .77 10.1 General .77 10.2 Insulation resistance and electric strength77 10.2.1 Test Insulation resistance .78 10.2.2 Test Electric strength 79 10.3 Touch current, protective conductor current and electric burn.81 11.1 Genera

28、l .82 11.2 Creepage distances and clearances.82 12.1 General .85 12.2 Selection of lamps and ballasts85 12.3 Endurance test 85 12.3.1 Test.86 12.7 Thermal test in regard to fault conditions in lamp control gear or electronic 12.7.2 Test for luminaires with temperature sensing controls internal/exter

29、nal SECTION 13: RESISTANCE TO HEAT, FIRE AND TRACKING SECTION 14: SCREW TERMINALS SECTION 15: SCREWLESS TERMINALS AND ELECTRICAL CONNECTIONS BS EN 60598-1:200860598-1 IEC:2008 5 12.3.2 Compliance .87 12.4 Thermal test (normal operation).87 12.4.1 Test.87 12.4.2 Compliance .89 12.5 Thermal test (abno

30、rmal operation) .92 12.5.1 Test.92 12.5.2 Compliance .93 12.6.1 Test for luminaires without thermal cut-outs .96 12.6 Thermal test (failed windings in lamp control gear).96 devices incorporated in thermoplastic luminaires98 12.7.1 Test for luminaires without temperature sensing controls98 to the bal

31、last or transformer .100 13.1 General .100 13.2 Resistance to heat.101 13.3 Resistance to flame and ignition 101 13.4 Resistance to tracking .102 14.1 General .102 14.2 Definitions .102 14.2.1 Pillar terminal 102 14.2.2 Screw terminal.103 14.2.3 Stud terminal .103 14.2.4 Saddle terminal103 14.2.5 Lu

32、g terminal.103 14.2.6 Mantle terminal 103 14.3 General requirements and basic principles.103 14.4 Mechanical tests105 15.1 General .109 15.2 Definitions .109 15.2.2 Permanent connections109 15.2.1 Screwless terminals.109 15.2.3 Non-permanent connections 109 15.2.4 Lead assemblies109 15.2.5 Non-prepa

33、red conductors.109 15.2.6 Test current .109 15.3 General requirements 110 15.4 General instructions on tests111 15.4.1 Preparation of samples 111 15.4.2 Test conductors .111 15.4.3 Multi-conductor terminals.111 15.4.4 Multi-way terminals 111 15.4.5 Test quantities .111 Annex A (normative) Test to es

34、tablish whether a conductive part may cause an electric Annex E (normative) Determination of winding temperature rises by the increase-in-)Annex N (informative) Explanation of marking for luminaires that are not suitable for Annex P (normative) Absorption requirements for the protective shield to be

35、 fitted to Annex R (normative) Schedule of amended subclauses containing more serious/critical Annex S (normative) Requirements for the identification of a family or range of Annex U (informative) Creepage and clearances distances for luminaires where a Annex V (normative) Additional test requiremen

36、ts for terminal blocks with integrated screwless earthing contact for direct connection to the luminaire housing or to parts of BS EN 60598-1:200860598-1 IEC:2008 6 15.5 Terminal and connections for internal wiring.111 15.5.1 Mechanical tests111 15.6 Electrical tests.112 15.6.1 Contact resistance te

37、st 113 15.6.2 Heating tests .113 15.7 Terminals and connections for external wiring114 15.7.1 Conductors 114 15.8 Mechanical tests114 15.9 Electrical tests.115 15.9.1 Contact resistance test 115 15.9.2 Heating tests .116 shock141 Annex B (normative) Test lamps.142 Annex C (normative) Abnormal circui

38、t conditions 145 Annex D (normative) Draught-proof enclosure 148 resistance method. 151 Annex F (normative) Test for resistance to stress corrosion of copper and copper alloys 152 Annex G (normative) Measurement of touch current and protective conductor current .154 Annex H (Void)158 Annex I (Void)

39、.159 Annex J (informative) Explanation of IP numbers for degrees of protection .160 Annex K (informative) Temperature measurement 161 Annex L (informative) Guide to good practice in luminaire design165 Annex M (normative) Determination of creepage distances and clearances.170 mounting on normally fl

40、ammable surfaces and covering with insulation materials.171 Annex O (Void) .175 luminaires designed for metal halide lamps which emit a high level of UV radiation176 Annex Q (informative) Conformity testing during manufacture.178 requirements which require products to be retested .180 luminaires for

41、 type testing .181 Annex T (informative) Reference to Class 0182 higher degree of availability (impulse withstand category III) may be requested183 the body185 Annex W (normative) Alternative thermal test for thermoplastic luminaires187 Bibliography197 Annex ZC (informative) A-deviations 196 Annex Z

42、B (normative) Special national conditions 193Normative references to international publications with their Annex ZA (normative)corresponding European publications 189 Figure 2 Terminal block arrangement for installation test for luminaires with Figure 22 Examples of self-tapping, thread-cutting and

43、thread-forming screws (from Figure C.3 Circuit for testing rectifying effect of some high pressure sodium and Figure G.2 Measuring network, touch current weighted for perception or reaction (for Figure G.3 Measuring network, touch current weighted for let-go (for portable class I BS EN 60598-1:20086

44、0598-1 IEC:2008 7 Figure 1 Symbols .117 connecting leads (tails) .119 Figure 3 This figure has been withdrawn from the present edition. 119 Figure 4 Illustration of the requirements of 4.15 120 Figure 5 This figure has been withdrawn from the present edition. 120 Figure 6 Apparatus for proving prote

45、ction against dust121 Figure 7 Apparatus for testing protection against rain and splashing .122 Figure 8 Nozzle for spray test.123 Figure 9 Relation between winding temperature and mounting surface temperature 124 Figure 10 Ball-pressure apparatus125 Figure 11 Arrangement and dimensions of the elect

46、rodes for the tracking test 125 Figure 12 Pillar terminals126 Figure 13 Screw terminals and stud terminals.127 Figure 14 Saddle terminals.129 Figure 15 Lug terminals130 Figure 16 Mantle terminals .131 Figure 17 Construction of electrical connections .132 Figure 18 Examples of spring-type screwless t

47、erminals 132 Figure 19 Further examples of screwless terminals.133 Figure 20 Illustration of the terms “lopping-in” and “through wiring” .134 Figure 21 Apparatus for ball impact tests135 ISO 1891) .135 Figure 23 This figure has been withdrawn from the present edition135 Figure 24 Illustration of cre

48、epage and clearance measurements at a supply terminal 136 Figure 25 Tumbling barrel 136 Figure 26 Test circuit for safety during insertion137 Figure 27 Ignition temperatures of wood as a function of time.137 Figure 28 Example of permitted degree of soldering .138 Figure 29 Test chain 138 Figure 30 E

49、xample of a thread forming screw used in a groove of a metallic material139 Figure 31 Electro-mechanical contact system with plug/socket connection 140 Figure 32 Test circuit for luminaires incorporating fluorescent lamp 70 W 140 Figure C.1 Circuit for testing rectifying effect (some capacitive starterless ballasts only) .146 Figure C.2 Circuit for testing rectifying effect (ballasts for single pin lamps) 146 some metal halide lamps.147 F