EN 60335-2-68-2012 en Household and similar electrical appliances - Safety - Part 2-68 Particular requirements for spray extraction machines for commercial use.pdf

《EN 60335-2-68-2012 en Household and similar electrical appliances - Safety - Part 2-68 Particular requirements for spray extraction machines for commercial use.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-68-2012 en Household and similar electrical appliances - Safety - Part 2-68 Particular requirements for spray extraction machines for commercial use.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances SafetyPart 2-68: Particular requirements for spray extraction machines, for commercial useBS EN 60335-2-68:2012BS EN 60335-2-68:2012Na

2、tional forewordThis British Standard is the UK implementation of EN 60335-2-68:2012. It is derived from IEC 60335-2-68:2012. It supersedes BS EN 60335-2-68:2009 which will be withdrawn on 3 May 2015.The CENELEC common modifications have been implemented at the appropriate places in the text. The sta

3、rt and finish of each common modification is indicated in the text by tags .The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/10, Floor treatment machines (industrial).A list of organizat

4、ions represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 201

5、3.ISBN 978 0 580 70464 2 ICS 97.020 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013.Amendments/corrigenda issued since publicationDate Text affected

6、BRITISH STANDARDEUROPEAN STANDARD EN 60335-2-68 NORME EUROPENNE EUROPISCHE NORM August 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 B

7、russels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-68:2012 E ICS 97.020 English version Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for

8、 commercial use (IEC 60335-2-68:2012, modified) Appareils lectrodomestiques et analogues - Scurit - Partie 2-68: Exigences particulires pour les machines de nettoyage par pulvrisation et aspiration, usage commercial (CEI 60335-2-68:2012, modifie) Sicherheit elektrischer Gerte fr den Hausgebrauch und

9、 hnliche Zwecke - Teil 2-68: Besondere Anforderungen fr Sprhextraktionsmaschinen fr den gewerblichen Gebrauch (IEC 60335-2-68:2012, modifiziert) This European Standard was approved by CENELEC on 2012-05-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

10、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European S

11、tandard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members

12、are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway,

13、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Foreword The text of document 61J/490/FDIS, future edition 4 of IEC 60335-2-68, prepared by SC 61J, “Electrical motor-operated cleaning appliances for commercial use“, of IEC/TC 61, “Safety of

14、household and similar electrical appliances“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60335-2-68:2012. A draft amendment, which covers common modifications to IEC 60335-2-68, was prepared by CLC/TC 61, “Safety of household and similar electrical appliances“ and ap

15、proved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-05-03 latest date by which the national standards conflicting with this document have to be withd

16、rawn (dow) 2015-05-03 This document supersedes EN 60335-2-68:2009. The principal changes in EN 60335-2-68:2012 as compared with EN 60335-2-68:2009 are as follows (minor changes are not listed): the title has been changed for better distinction with regard to EN 60335-2-72; the scope has been revised

17、 editorially to avoid misunderstandings; terms and definitions has been revised with regard to the requirements revised; the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes has been made to Clauses 15, 22 and 25; the markin

18、gs and instructions (Clause 7) have been revised basically; a new Annex AA Emission of acoustical noise was added; and a new Annex BB Emission of vibration was added. This part 2 is to be used in conjunction with the EN 60335-1:2012 and its amendments. NOTE 1 When “Part 1” is mentioned in this stand

19、ard, it refers to EN 60335-1. This part 2 supplements or modifies the corresponding clauses in EN 60335-1, so as to convert that publication into the European Standard: Safety requirements for spray extraction machines for commercial use. When a particular subclause of Part 1 is not mentioned in thi

20、s part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101

21、 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roman t

22、ype; BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E) test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. Clauses, subclauses, notes, tables, f

23、igures and annexes which are additional to those in IEC 60335-2-68:2012 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent righ

24、ts. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this docum

25、ent. Endorsement notice The text of the International Standard IEC 60335-2-68:2012 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)Add the following special national condition to Annex ZA of EN 60335-1:2012: Annex ZA(normat

26、ive) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard / Harmonization Document

27、. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause7.12 Special national conditionFinland If a polyvinyl chloride sheathed cord is fitted, the instructions shall state that the appliance is not t

28、o be used outdoors at low temperature. Modifications to Annexes Z The annexes of Part 1 are applicable except as follows: BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)Apply the following changes to Annex ZC of EN 60335-1:2012: Annex ZC(normative) Normative references to international publications wit

29、h their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

30、 (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year Add: IEC 60312-1 - Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for me

31、asuring the performance EN 60312-1 - ISO 6344-2 - Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 - - BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)Annex ZE (informative) Specific additional requirements for appliances and machines in

32、tended for commercial use This annex is not applicable. BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)Annex ZZ (informative) Coverage of Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the Europe

33、an Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex I of the EU Directive 2006/42/EC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Oth

34、er requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)CONTENTS INTRODUCTION . 4 1 Scope . . 5 2 Normative references . 6 3 Terms and definitions .6 4 General requirement . 8 5 General condition

35、s for the tests . . 8 6 Classification 9 7 Marking and instructions . 9 8 Protection against access to live parts . 12 9 Starting of motor-operated appliances . 12 10 Power input and current . 12 11 Heating . 12 12 Void. 13 13 Leakage current and dielectric strength at operating temperature . 13 14

36、Transient overvoltages . 13 15 Moisture resistance . . 13 16 Leakage current and electric strength 15 17 Overload protection of transformers and associated circuits 15 18 Endurance . . 15 19 Abnormal operation . . 15 20 Stability and mechanical hazards . 16 21 Mechanical strength . 16 22 Constructio

37、n . 19 23 Internal wiring . . 21 24 Components . 21 25 Supply connection and external flexible cords . 21 26 Terminals for external conductors . 23 27 Provision for earthing . 23 28 Screws and connections . 23 29 Clearances, creepage distances and solid insulation 23 30 Resistance to heat and fire 2

38、3 31 Resistance to rusting . . 23 32 Radiation, toxicity and similar hazards . 23 Annexes . . 27 Annex AA (informative) Emission of acoustical noise 28 Annex BB (informative) Emission of vibration . 31 Bibliography . 32 BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)Figure 101 Impact test apparatus . 2

39、4 Figure 102 Apparatus for testing the abrasion resistance of current-carrying hoses . . 25 Figure 103 Apparatus for testing the resistance to flexing of current-carrying hoses . 25 Figure 104 Configuration of the hose for the freezing treatment . . 26 Figure 105 Flexing positions for the hose after

40、 removal from the freezing cabinet 26 Figure AA.1 Machine with cleaning head connected by hose and connecting tube . 30 Table 12 Pull force and torque 22 BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E)INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of

41、its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the m

42、anufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364 as far as possible so that ther

43、e is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to ea

44、ch function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees res

45、ponsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal a

46、nd generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temper

47、ature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles

48、 of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tes

49、ted according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-68:2012 EN 60335-2-68:2012 (E) 4 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-68: Particular requirements for spray extraction machines, for commercial use 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrical portable, non-self-propelled motor-operated spray e