EN 60335-2-103-2003 en Household and similar electrical appliances C Safety Part 2-103 Particular requirements for drives for gates doors and windows (Incorporates Amendment A11 20.pdf

《EN 60335-2-103-2003 en Household and similar electrical appliances C Safety Part 2-103 Particular requirements for drives for gates doors and windows (Incorporates Amendment A11 20.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-103-2003 en Household and similar electrical appliances C Safety Part 2-103 Particular requirements for drives for gates doors and windows (Incorporates Amendment A11 20.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-103: 2003 Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows ICS 13.120; 91.060.50 Incorporating CENELEC amendment A11National foreword This British Standard is the UK implementation of EN 6033

2、5-2-103:2003, incorporating A11:2009. It is derived from IEC 60335-2-103:2002. Where a common modification has been introduced by CENELEC amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by hi. The UK parti

3、cipation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorised appliance group. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication

4、 does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60335-2-103:2003 This British Standard was published under the authority of the Standard

5、s Policy and Strategy Committee on 27 August 2003 BSI 2010 Amendments/corrigenda issued since publication Date Comments 31 Januar 2010 Implementation of CENELEC amendment A11:2009 ISBN 978 0 580 65868 6EUROPEAN STANDARD EN 60335-2-103:2003 +A11 A11 NORME EUROPENNE EUROPISCHE NORM July 2009 CENELEC E

6、uropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide

7、 for CENELEC members. Ref. No. EN 60335-2-103:2003 E ICS 13.120; 91.060.50 English version Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2002) Appareils lectrodomestiques et analogues Scurit Partie 2-10

8、3: Rgles particulires aux systmes dentranement motoris des portails, portes, barrires et lments analogues (CEI 60335-2-103:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-103: Besondere Anforderungen fr Antriebe fr Tore, Tren und Fenster (IEC 60335-2-103:2002) This

9、European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

10、ences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC m

11、ember into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania,

12、Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of the International Standard IEC 60335-2-103:2002 (61/2179/FDIS), prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submi

13、tted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-103 on 2003-03-01. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-03-01 - date on

14、 which national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Am

15、endments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Sta

16、ndard: Safety requirements for electrical drives for gates, doors and windows. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is

17、to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in

18、a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic

19、type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in

20、 Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ BS EN 60335-2-103:2003 EN 60335-2-103:2003 Page 2 A proposal to amend EN 60335-2-103:2003, document TC61/SE0405/NP, was discussed during the Berlin meeting of C

21、ENELEC TC 61 in November 2007, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated in November 2008 and was approved by CENELEC as amendment A11 to EN 60335-2-103:2003 on 2009-06-01. The following dates were fixed: latest date by which

22、the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-06-01 date on which the national standards conflicting with the amendment have to be withdrawn (dow) 2012-06-01 _ BS EN 60335-2-103:2003 EN 60335-2-103:2003 Page 3 Fore

23、word to amendment A11 Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Dir

24、ective, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directiv

25、e. _ Endorsement notice The text of the International Standard IEC 60335-2-103:2002 was approved by CENELEC as a European Standard without any modification. _ blankCONTENTS INTRODUCTION 6 1 Scope 7 2 Normative references. 8 3 Definitions . 8 4 General requirement 9 5 General conditions for the tests

26、 . 9 6 Classification . 9 7 Marking and instructions 9 8 Protection against access to live parts11 9 Starting of motor-operated appliances 11 10 Power input and current11 11 Heating.12 12 Void 12 13 Leakage current and electric strength at operating temperatures 12 14 Transient overvoltages12 15 Moi

27、sture resistance.12 16 Leakage current and electric strength .12 17 Overload protection of transformers and associated circuits12 18 Endurance 13 19 Abnormal operation.13 20 Stability and mechanical hazards13 21 Mechanical strength18 22 Construction .18 23 Internal wiring.18 24 Components .19 25 Sup

28、ply connection and external flexible cords.19 26 Terminals for external conductors.19 27 Provision for earthing19 28 Screws and connections .19 29 Clearances, creepage distances and solid insulation 19 30 Resistance to heat and fire .19 31 Resistance to rusting 20 32 Radiation, toxicity and similar

29、hazards20 Annexes22 Bibliography25 Figure 101 Examples of driven parts 21 BS EN 60335-2-103:2003 EN 60335-2-103:2003 Page 5063-53-2103 EI2:C200E() 5 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qual

30、ified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnorma

31、l situations that can be expected in practice. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within

32、 the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. This standard is a product fa

33、mily standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examine

34、d and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of th

35、e requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-103:2003 EN 60335-2-103:2003 Page 6 6 603-53-2103 EI2:C200)E( HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-103: Particular requirements for drives for gates, doors a

36、nd windows 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-pha

37、se appliances and 480 V for other appliances. It also covers the hazards associated with the movement of the driven part. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, office

38、s, hotels, restaurants, hospitals, in industry and on farms, are within the scope of this standard. Requirements for drives for doors that may be used in emergency are given in Annex AA. NOTE 101 Examples of drives within the scope of this standard are drives for folding doors; revolving doors; roll

39、ing doors; roof windows; sectional overhead doors; swinging and sliding gates or doors. Examples are shown in Figure 101. NOTE 102 Drives may be supplied with a driven part. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all pers

40、ons in and around the home. However, in general, it does not take into account the use of appliances by young children or infirm persons without supervision; playing with the appliance by young children. NOTE 103 Attention is drawn to the fact that in many countries additional requirements are speci

41、fied by the national authorities responsible for the protection of labour and similar authorities. NOTE 104 This standard does not apply to drives for vertically moving garage doors for residential use (60335-2-95); for rolling shutters, awnings, blinds and similar equipment (60335-2-97); intended e

42、xclusively to be used by trained persons in commercial and industrial premises; for specific purposes, such as fire barriers; intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). BS EN 60335-2-103:2003 E

43、N 60335-2-103:2003 Page 7063-53-2103 EI2:C200E() 7 2 Normative references This clause of Part 1 is applicable except as follows. Addition: 60068-2-52, Environment testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium chloride solution). 60825-1:1998, Safety of laser products Part 1: Equipment cla

44、ssification, requirements and users guide. 3 Definitions This clause of Part 1 is applicable except as follows. 3.1.9 Replacement: normal operation operation of the drive under the following conditions Drives supplied without a driven part are operated with their rated load. Drives supplied with a d

45、riven part are operated with the driven part installed in accordance with the instructions. 3.101 drive motor and other components that control the movement of the driven part NOTE Examples of components are gears, controls, brakes, trolleys and entrapment protection systems. 3.102 driven part movab

46、le part of a gate, door or window that is operated by the drive 3.103 window part in a building that opens and closes in order to regulate the air and which is not intended for passage 3.104 rated load force or torque assigned to the drive by the manufacturer 3.105 rated operating time duration of c

47、ontinuous operation assigned to the drive by the manufacturer NOTE During continuous operation, the drive may reverse its direction. 3.106 rated number of operating cycles number of uninterrupted cycles assigned to the drive by the manufacturer BS EN 60335-2-103:2003 EN 60335-2-103:2003 Page 8 8 603

48、-53-2103 EI2:C200)E( 3.107 entrapment protection system part of the drive that provides protection against entrapment NOTE 1 An entrapment protection system may consist of one or more devices, such as pressure sensitive edges, passive infrared and active light sensing devices. NOTE 2 An entrapment p

49、rotection system may be incorporated in the motor assembly or installed separately. 3.108 biased-off switch switch that automatically returns to the off position when its actuating member is released 4 General requirement This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable except as follows. 5.2 Addition: When a test