EN 60335-2-10-2003 en Household and similar electrical appliances C Safety Part 2-10 Particular requirements for floor treatment machines and wet scrubbing machines (Incorporates A.pdf

《EN 60335-2-10-2003 en Household and similar electrical appliances C Safety Part 2-10 Particular requirements for floor treatment machines and wet scrubbing machines (Incorporates A.pdf》由会员分享，可在线阅读，更多相关《EN 60335-2-10-2003 en Household and similar electrical appliances C Safety Part 2-10 Particular requirements for floor treatment machines and wet scrubbing machines (Incorporates A.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60335-2-10: 2003+A1:2008 Household and similar electrical appliances Safety Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines ICS 13.120; 97.080 BS EN 60335-2-10:2003+A1:2008 This British Standard was published under the authority of th

2、e Standards Policy and Strategy Committee on 27 August 2003 BSI 2008 ISBN 978 0 580 64532 7 National foreword This British Standard is the UK implementation of EN 60335-2-10:2003+A1:2008. It is identical with IEC 60335-2-10:2002, incorporating amendment 1:2008. It supersedes BS EN 60335-2-10:2003 wh

3、ich will be withdrawn on 2013-05-01. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in i

4、ts preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorized appliance group. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not pur

5、port to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments 30 September 2008 Implementation of IEC amendm

6、ent 1:2008 with CENELEC endorsement A1:2008EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM June2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart

7、35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-10:2003 E ICS 97.080; 13.120 Supersedes EN 60335-2-10:1995English version Household and similar electrical appliances Safety Part 2-10: Particular

8、requirements for floor treatment machines and wet scrubbing machines (IEC 60335-2-10:2002) Appareils lectrodomestiques et analogues Scurit Partie 2-10: Rgles particulires pour les appareils de traitement des sols et les machines brosser les sols mouills (CEI 60335-2-10:2002) Sicherheit elektrischer

9、Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-10: Besondere Anforderungen fr Bodenbehandlungs- und Nassschrubbmaschinen (IEC 60335-2-10:2002) This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipul

10、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard

11、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national

12、electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EN 60335-2-10:2003+A1 Foreword The text

13、of the International Standard IEC 60335-2-10:2002 (61/2201/FDIS), prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 60335-2-10 on 2003-04-01. This European Standard rep

14、laces EN 60335-2-10:1995. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-04-01 - date on which national standards conflicting with the EN have to be withdrawn (dow

15、) 2006-04-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the

16、 dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric floor treatment machines and wet sc

17、rubbing machines. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering sys

18、tem is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lett

19、ered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text

20、 are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations fro

21、m this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page2 BS EN 60335-2-10:2003+A1:2008Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For pro

22、ducts having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are

23、 covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-10:2002 was approved by CENELEC as a European Standard without any modification. _ Page3 BS EN 60335-2-10:2003+A1:2008 Forewordtoamen

24、dmentA1 The text of document 61/3540/FDIS, future amendment 1 to IEC 60335-2-10:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-10:2003 on 200

25、8-05-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2

26、013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-10:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the Internati

27、onal Standard IEC 60335-2-10:2002 was approved by CENELEC as an amendment to the European Standard without any modification. In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ 2 60335-2-10 IEC:2002(E) CONTENTS I

28、NTRODUCTION 5 1 Scope 6 2 Normative references. 6 3 Definitions . 7 4 General requirement 7 5 General conditions for the tests . 7 6 Classification . 7 7 Marking and instructions 7 8 Protection against access to live parts. 8 9 Starting of motor-operated appliances . 8 10 Power input and current. 8

29、11 Heating 8 12 Void . 8 13 Leakage current and electric strength at operating temperature. 8 14 Transient overvoltages. 8 15 Moisture resistance 8 16 Leakage current and electric strength 9 17 Overload protection of transformers and associated circuits. 9 18 Endurance . 9 19 Abnormal operation 9 20

30、 Stability and mechanical hazards. 9 21 Mechanical strength. 9 22 Construction 9 23 Internal wiring.10 24 Components .10 25 Supply connection and external flexible cords.10 26 Terminals for external conductors.10 27 Provision for earthing10 28 Screws and connections .10 29 Clearances, creepage dista

31、nces and solid insulation 10 30 Resistance to heat and fire .10 31 Resistance to rusting 11 32 Radiation, toxicity and similar hazards11 Annexes12 Bibliography12 Page4 BS EN 60335-2-10:2003+A1:200860335-2-10 IEC:2002(E) 5 INTRODUCTION It has been assumed in the drafting of this International Standar

32、d that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use t

33、aking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practiceandtakesintoaccountthewayinwhichelectromagnetic This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules

34、 when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is rea

35、sonable. If applicable, the influence of one function on the other is taken into account. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. An appliance that complies with the text of

36、 this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction diff

37、ering from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. Page5 BS EN 60335-2-10:2003+A1:2008 phenomenacanaffectthesafeoperationofa

38、ppliances. WhenaPart2standarddoesnotincludeadditionalrequirementstocoverhazardsdealtwithin Part1, Part1applies. NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in questi

39、on over and above the general requirements. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperatur

40、e requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or Part 2 standards. 6 60335-2-10 IEC:2002(E) HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-10: Particular requirements for floor treatment ma

41、chines and wet scrubbing machines 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric floor treatment and wet scrubbing machines intended for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101

42、Examples of floor treatment machines are floor buffers; floor polishers; floor waxers. NOTE 102 Examples of wet scrubbing machines are floor scrubbers; rug shampooers; upholstery shampooers. Appliances not intended for normal household use but that nevertheless may be a source of danger to the publi

43、c, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. NOTE 103 Examples of such appliances are appliances intended to be used in hotels, offices, schools, hospitals and similar premises. As far as is practicable, this sta

44、ndard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account NOTE 104 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additi

45、onal requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 105 This standard does not apply to vacuum cleaners and water suction cleani

46、ng appliances (IEC 60335-2-2); appliances intended for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour, or gas); floor sanding machines. 2 Normative references This clause of

47、Part 1 is applicable. Page6 BS EN 60335-2-10:2003+A1:2008 persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. ! “60335-2

48、-10 IEC:2002(E) 7 3 Definitions This clause of Part 1 is applicable except as follows. 3.1.9 Replacement: normal operation operation of the appliance under the following conditions Floor treatment machines are operated while being moved backwards and forwards at a rate of 15 cycles per minute on a polished steel plate over a distance of 1 m. The appliance is fitted with brushes for hard-surface floors in accordance with the instructions. NOTE 101 Heating of the steel plate is to be prevented. Forced cooling may be used but care is to be taken to ensure that the air movement does not affec