EN 60286-2-2015 en Packaging of components for automatic handling - Part 2 Packaging of components with unidirectional leads on continuous tapes.pdf

《EN 60286-2-2015 en Packaging of components for automatic handling - Part 2 Packaging of components with unidirectional leads on continuous tapes.pdf》由会员分享，可在线阅读，更多相关《EN 60286-2-2015 en Packaging of components for automatic handling - Part 2 Packaging of components with unidirectional leads on continuous tapes.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPackaging of components for automatic handlingPart 2: Packaging of components with unidirectional leads on continuous tapesBS EN 60286-2:2015National forewordThis British Standard is the UK implementation of EN 60286-2:2015. It isidentical to IEC 60286-2:2015. It supersedes

2、BS EN 60286-2:2009 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purpo

3、rt to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82160 8ICS 31.020; 31.240Compliance with a British Standard cannot confer immunity fromlegal obliga

4、tions.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60286-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60286-2 June 2015 ICS 31.

5、240; 31.020 Supersedes EN 60286-2:2009 English Version Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:2015) Emballage de composants pour oprations automatises - Partie 2: Emballage des composants sorties uni

6、latrales en bandes continues (IEC 60286-2:2015) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung - Teil 2: Gurtung von Bauelementen mit einseitig herausgefhrten Anschlussdrhten (IEC 60286-2:2015) This European Standard was approved by CENELEC on 2015-05-27. CENELEC members are

7、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t

8、he CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Manage

9、ment Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

10、and, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Kom

11、itee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60286-2:2015 E BS EN 60286-2:2015EN 60286-2:2015 - 2 - Foreword The text of docu

12、ment 40/2343/FDIS, future edition 4 of IEC 60286-2, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60286-2:2015. The following dates are fixed: latest date by which the document has to be implemen

13、ted at national level by publication of an identical national standard or by endorsement (dop) 2016-02-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-05-27 This document supersedes EN 60286-2:2009. Attention is drawn to the possibility th

14、at some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60286-2:2015 was approved by CENELEC as a European Standard with

15、out any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: ISO 11469:2000 NOTE Harmonized as EN ISO 11469:2000. BS EN 60286-2:2015- 3 - EN 60286-2:2015 Annex ZA (normative) Normative references to international publications with th

16、eir corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

17、cluding any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.

18、Publication Year Title EN/HD Year IEC 60097 1991 Grid systems for printed circuits EN 60097 1993 IEC 60301 - Preferred diameters of wire terminations of capacitors and resistors EN 60301 - BS EN 60286-2:2015 2 IEC 60286-2:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references . 7 3 Ter

19、ms, definitions and symbols 7 3.1 Terms and definitions 7 3.2 Symbols 10 4 Dimensions 13 4.1 Tape width dimensions (W, W0, W1, W2) 13 4.1.1 Tape width (W) 13 4.1.2 Hold-down tape width (W0) 13 4.1.3 Distance between the upper edges of the carrier tape and the abscissa (W1) 13 4.1.4 Distance between

20、the upper edges of the carrier tape and the hold-down tape (W2) 13 4.2 Components and sprocket hole pitches (P, P0, P1, P2, D0) . 13 4.2.1 General . 13 4.2.2 Pitch between two consecutive mutual components (P) 13 4.2.3 Pitch between two consecutive sprocket holes (P0) 13 4.2.4 Distance between the o

21、rdinate and the first lead of the component on the drawer side (for components with two leads) (P1) . 14 4.2.5 Distance between the ordinate and the center lead of the component on the drawer side (for components with three leads) (P2) 14 4.2.6 Sprocket hole diameter (D0) 14 4.3 Dimensions for compo

22、nent position relative to the abscissa (H, H0, H1, H2, H3) . 14 4.3.1 Distance between the abscissa and the bottom plane of the component body (H). 14 4.3.2 Distance between the abscissa and the reference plane of components with crimped leads (H0) . 14 4.3.3 Distance between the abscissa and the to

23、p of the body of the components (H1) . 14 4.3.4 Distance between the abscissa and the tip of the short terminal without tape (H2) . 14 4.3.5 Distance between the bottom of the component and the tip of the short terminal without tape (H3) 14 4.4 Lead terminal dimensions (d, d1, F, F1, F2, L, K) and t

24、ape thickness (T, T1) . 15 4.4.1 Dimensions and tolerances of lead spacing for two leaded components (F) and for three leaded components (F1, F2) 15 4.4.2 Lead terminal diameter (d, d1) . 15 4.4.3 Tape thickness (T, T1) . 15 4.4.4 Maximum permissible protrusion of the ends of the leads (L) 15 4.4.5

25、Distance between the lead terminal and the short terminal without tape (K) . 15 4.5 Maximum permissible deviation of taped component dimensions . 16 4.5.1 Maximum permissible deviation of taped component dimensions (h, p, P1) 16 5 Taping . 16 5.1 Taping dimensions 16 5.2 Splices 16 BS EN 60286-2:201

26、5IEC 60286-2:2015 IEC 2015 3 5.3 Tape leader and trailer 17 6 Tape 17 6.1 Polarization direction on tape 17 6.2 Kinks or bends on tape 17 6.3 Adhesion to tape and extraction force 17 6.4 Tape breaking force 18 6.5 Tape material 18 6.6 Hold-down tape . 18 6.7 Missing components 18 7 Packing . 19 7.1

27、General . 19 7.2 Reel dimensions 19 7.2.1 Component tape reeling . 20 7.2.2 Components protection 20 7.2.3 Reel filling 21 7.3 Maximum dimensions of the fan-fold container 21 7.4 Recycling 21 7.5 Marking . 21 Annex A (informative) Dimensions for two leads . 22 A.1 Dimensions for two formed leads, sp

28、rocket hole between parts 22 A.2 Dimensions for two formed leads, sprocket hole between leads . 24 A.3 Dimensions for two straight leads, sprocket hole between parts . 26 A.4 Dimensions for two straight leads, sprocket hole between leads 28 Annex B (informative) Dimensions for three leads . 30 B.1 D

29、imensions for three formed leads, sprocket hole between parts . 30 B.2 Dimensions for three formed leads, sprocket hole between leads . 32 Bibliography 34 Figure 1 Short terminal without tape . 8 Figure 2 Crimp . 8 Figure 3 Abscissa, ordinate, seating plane and reference plane 9 Figure 4 Symbol refe

30、rences of tape and taped components dimensions 11 Figure 5 Symbol references of reel dimensions . 12 Figure 6 Symbol references of fan-fold container dimensions 12 Figure 7 Position of short terminal without tape . 16 Figure 8 Leader and trailer of tape 17 Figure 9 Pull strength from taping . 18 Fig

31、ure 10 Missing components . 19 Figure 11 Reeling . 20 Figure A.1 Symbol references for two formed leads, sprocket hole between parts . 22 Figure A.2 Symbol references for two formed leads, sprocket hole between leads . 24 Figure A.3 Symbol references for two straight leads, sprocket hole between par

32、ts 26 Figure A.4 Symbol references for two straight leads, sprocket hole between leads 28 Figure B.1 Symbol references for three formed leads, sprocket hole between parts . 30 Figure B.2 Symbol references for three formed leads, sprocket hole between leads 32 BS EN 60286-2:2015 4 IEC 60286-2:2015 IE

33、C 2015 Table 1 List of symbols for tape and taped components 10 Table 2 List of symbols used for packing taped components . 12 Table 3 Reel dimensions 20 Table 4 Maximum outer dimensions for a fan-fold arrangement 21 Table A.1 Dimensions for two formed leads, sprocket hole between parts . 23 Table A

34、.2 Dimensions for two formed leads, sprocket hole between leads 25 Table A.3 Dimensions for two straight leads, sprocket hole between parts 27 Table A.4 Dimensions for two straight leads, sprocket hole between leads 29 Table B.1 Dimensions for three formed leads, sprocket hole between parts 31 Table

35、 B.2 Dimensions for three formed leads, sprocket hole between leads 33 BS EN 60286-2:2015IEC 60286-2:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING Part 2: Tape packaging of components with unidirectional leads on continuous tapes FOREWORD

36、1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electric

37、al and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technic

38、al committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organiza

39、tion for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical co

40、mmittee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications

41、 is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national an

42、d regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services a

43、nd, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants o

44、r agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, us

45、e of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that

46、some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60286-2 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. Th

47、is fourth edition cancels and replaces the third edition, published in 2008, and constitutes a technical revision. This edition includes the following significant changes with respect to the previous edition: A complete revision of the structure and reworked layout. A two page overview containing a

48、clear overview of all symbols and references. Addition of annexes of known radial tape formats. Improved figures. BS EN 60286-2:2015 6 IEC 60286-2:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 40/2343/FDIS 40/2374/RVD Full information on the votin

49、g for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60286 series, published under the general title Packaging of components for automatic handling, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability da