EN 60204-32-2008 en Safety of machinery - Electrical equipment of machines - Part 32 Requirements for hoisting machines《机械安全性 机械电气设备 第32部分 起重机械的要求》.pdf

《EN 60204-32-2008 en Safety of machinery - Electrical equipment of machines - Part 32 Requirements for hoisting machines《机械安全性 机械电气设备 第32部分 起重机械的要求》.pdf》由会员分享，可在线阅读，更多相关《EN 60204-32-2008 en Safety of machinery - Electrical equipment of machines - Part 32 Requirements for hoisting machines《机械安全性 机械电气设备 第32部分 起重机械的要求》.pdf（138页珍藏版）》请在麦多课文档分享上搜索。

1、Safety of machinery Electricalequipment of machines Part 32: Requirements for hoisting machinesBS EN 60204-32:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is the UK implementation of E

2、N 60204-32:2008. It isidentical to IEC 60204-32:2008. It supersedes BS EN 60204-32:1998 which iswithdrawn.The UK participation in its preparation was entrusted to Technical CommitteeMCE/3, Safeguarding of machinery.A list of organizations represented on this committee can be obtained onrequest to it

3、s secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57562 4ICS 53.020.01BRITISH STANDARDBS EN 60204-32:2008Compliance with a British Standard cannot confer immunity fromlegal obl

4、igations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedEUROPEAN STANDARD EN 60204-32 NORME EUROPENNE EUROPISCHE NORM September 2008 CENELEC European Committee for Electrotechnical

5、 Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 6020

6、4-32:2008 E ICS 29.020; 53.020.01 Supersedes EN 60204-32:1998English version Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:2008) Scurit des machines - quipement lectrique des machines - Partie 32: Exigences pour les appareils de le

7、vage (CEI 60204-32:2008) Sicherheit von Maschinen - Elektrische Ausrstung von Maschinen - Teil 32: Anforderungen fr Hebezeuge (IEC 60204-32:2008) This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat

8、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard e

9、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national el

10、ectrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit

11、zerland and the United Kingdom. BS EN 60204-32:2008EN 60204-32:2008 - 2 - Foreword The text of document 44/574/FDIS, future edition 2 of IEC 60204-32, prepared by IEC TC 44, Safety of machinery - Electrotechnical aspects, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as

12、EN 60204-32 on 2008-07-01. This European Standard supersedes EN 60204-32:1998. EN 60204-32:2008 includes the following significant technical changes with respect to EN 60204-32:1998. a) Changes to EN 60204-1:2006 have been incorporated, especially: deletion of Clause 11 of EN 60204-1:1997; modificat

13、ion of the structure of equipotential bonding (Clause 8); separation of control functions (Clause 9) and devices (Clause 10); structure of technical documentation (Clause 17); verification of protection by automatic disconnection of supply (18.2). b) Subclause 9.2.7 on cableless controls has been mo

14、dified. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-07-01 Th

15、is European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directives 98/37/EC and 2006/42/EC. See Annex ZZ. Annexes ZA and ZZ have been added by CENELEC. _ BS EN 60204-32:2008- 3

16、- EN 60204-32:2008 Endorsement notice The text of the International Standard IEC 60204-32:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60038 NOTE Harmoniz

17、ed as HD 472 S1:1989 (modified). IEC 60204-11 NOTE Harmonized as EN 60204-11:2000 (not modified). IEC 60204-31 NOTE Harmonized as EN 60204-31:1998 (modified). IEC 60228 NOTE Harmonized as EN 60228:2005 (not modified). IEC 60269-1 NOTE Harmonized as EN 60269-1:2007 (not modified). IEC 60320-1 NOTE Ha

18、rmonized as EN 60320-1:2001 (not modified). IEC 60335 NOTE Harmonized in EN 60335 series (partially modified). IEC 60364 NOTE Harmonized in EN/HD 60364 series (modified). IEC 60870-5-1 NOTE Harmonized as EN 60870-5-1:1993 (not modified). IEC 60898 NOTE Harmonized in EN 60898 series (modified). IEC 6

19、0909 NOTE Harmonized in EN 60909 series (not modified). IEC 60947-5-2 NOTE Harmonized as EN 60947-5-2:2007 (not modified). IEC 61000-6-1 NOTE Harmonized as EN 61000-6-1:2007 (not modified). IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2:2005 (not modified). IEC 61000-6-3 NOTE Harmonized as EN 61000-6

20、-3:2007 (not modified). IEC 61000-6-4 NOTE Harmonized as EN 61000-6-4:2007 (not modified). IEC 61180-2 NOTE Harmonized as EN 61180-2:1994 (not modified). IEC 61496-1 NOTE Harmonized as EN 61496-1:2004 (modified). IEC 61557 NOTE Harmonized in EN 61557 series (not modified). IEC 61558-2-17 NOTE Harmon

21、ized as EN 61558-2-17:1997 (not modified). IEC 61800 NOTE Harmonized in EN 61800 series (not modified). IEC 61984 NOTE Harmonized as EN 61984:2001 (not modified). IEC 62305 NOTE Harmonized in EN 62305 series (not modified). ISO 14122-1 NOTE Harmonized as EN ISO 14122-1:2001 (not modified). ISO 14122

22、-2 NOTE Harmonized as EN ISO 14122-2:2001 (not modified). ISO 14122-3 NOTE Harmonized as EN ISO 14122-3:2001 (not modified). _ BS EN 60204-32:2008EN 60204-32:2008 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The followin

23、g referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by c

24、ommon modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60034-1 - 1)Rotating electrical machines - Part 1: Rating and performance EN 60034-1 20042)IEC 60034-5 -1)Rotating electrical machines - Part 5: Degrees of protection provided by the integral d

25、esign of rotating electrical machines (IP code) - Classification EN 60034-5 20012)IEC 60034-11 -1)Rotating electrical machines - Part 11: Thermal protection EN 60034-11 20042)IEC 60068-2-27 1987 Basic environmental testing procedures - Part 2: Tests - Test Ea and guidance: Shock EN 60068-2-27 1993 I

26、EC 60068-2-32 + A2 1975 1990 Environmental testing - Part 2: Tests. Test Ed: Free fall EN 60068-2-321993 IEC 60072-1 -1)Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080 - - IEC 60072-2 -1)Dimensions and output series for r

27、otating electrical machines - Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360 - - IEC 60073 -1)Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators EN 60073 20022)IEC 60309-1 -1)Plugs, socket-outlets a

28、nd couplers for industrial purposes - Part 1: General requirements EN 60309-1 + A11 19992)2004 IEC 60332 Series Tests on electric and optical fibre cables under fire conditions EN 60332 Series IEC 60364-1 (mod) -1)Low-voltage electrical installations - Part 1: Fundamental principles, assessment of g

29、eneral characteristics, definitions HD 60364-1 2008 2)IEC 60364-4-41 (mod) 2005 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 + corr. July 2007 2007 IEC 60364-4-42 2001 Electrical installations of buildings - Part 4-42: Prot

30、ection for safety - Protection against thermal effects - - 1)Undated reference. 2)Valid edition at date of issue. BS EN 60204-32:2008- 5 - EN 60204-32:2008 Publication Year Title EN/HD Year IEC 60364-4-43 2001 Electrical installations of buildings - Part 4-43: Protection for safety - Protection agai

31、nst overcurrent - - IEC 60364-5-52 2001 Electrical installations of buildings - Part 5-52: Selection and erection of electrical equipment - Wiring systems - - IEC 60364-5-53 + A1 (mod) 2001 2002 Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isola

32、tion, switching and control - HD 60364-5-534 - 2008 3)IEC 60364-5-54 (mod) 2002 Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors HD 60364-5-54 2007 IEC 60364-6 (mod) 2006

33、 Low voltage electrical installations - Part 6: Verification HD 60364-6 2007 IEC 60417 Data base Graphical symbols for use on equipment - - IEC 60439-1 A1 1999 2004 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies EN 60439-1 A1 1999 2004 IE

34、C 60445 (mod) -1)Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations EN 60445 20072)IEC 60446 1999 Basic and safety principles for man-machine interface, marking and identification - Identification of co

35、nductors by colours or numerals EN 60446 4) 1999 IEC 60447 -1)Basic and safety principles for man-machine interface, marking and identification - Actuating principles EN 60447 20042)IEC 60529 A1 1989 1999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May A1 1991 1993 2000 I

36、EC 60617 Data base Graphical symbols for diagrams - - IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60898 (mod) Series Electrical accessories - Circuit breakers for overcurrent protection for househo

37、ld and similar installations EN 60898 Series IEC 60947-1 2007 Low-voltage switchgear and controlgear - Part 1: General rules EN 60947-1 2007 IEC 60947-2 2006 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers EN 60947-2 2006 3)IEC 60364-5-53:2001/A1:2002, Clause 534: “Devices for prot

38、ection against overvoltages” is harmonized as HD 60364-5-534. 4)EN 60446:1999 is superseded by EN 60446:2007, which is based on IEC 60446:2007. BS EN 60204-32:2008EN 60204-32:2008 - 6 - Publication Year Title EN/HD Year IEC 60947-3 -1)Low-voltage switchgear and controlgear - Part 3: Switches, discon

39、nectors, switch-disconnectors and fuse-combination units EN 60947-3 19992)IEC 60947-4-1 A1 2000 2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters EN 60947-4-1 A1 2001 2002 IEC 60947-5-1 2003 Low-voltage switchgear

40、and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices EN 60947-5-1 + corr. July 2004 2005 IEC 61082-1 2006 Preparation of documents used in electrotechnology - Part 1: Rules EN 61082-1 2006 IEC 61140 -1)Protection against electric shoc

41、k - Common aspects for installation and equipment EN 61140 20022)IEC 61180-2 1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment EN 61180-2 1994 IEC 61310 Series Safety of machinery - Indication, marking and actuation EN 61310 Series IEC 61346 Series Industrial syste

42、ms, installations and equipment and industrial products - Structuring principles and reference designations EN 61346 Series IEC 61557-3 -1)Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures

43、 - Part 3: Loop impedance EN 61557-3 20072)IEC 61558-1 -1)Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests EN 61558-1 + corr. August 20052)2006 IEC 61558-2-6 -1)Safety of power transformers, power supply units and similar - Part 2-6

44、: Particular requirements for safety isolating transformers for general use EN 61558-2-6 19972)IEC 61800-5-2 2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional EN 61800-5-2 2007 IEC 61984 -1)Connectors - Safety requirements and tests EN 61984 20012)IEC

45、62023 -1)Structuring of technical information and documentation EN 62023 20002)IEC 62027 -1)Preparation of parts lists EN 62027 20002)IEC 62061 -1)Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061 20052)IEC 62079 -1)

46、Preparation of instructions - Structuring, content and presentation EN 62079 20012)ISO 7000 2004 Graphical symbols for use on equipment - Index and synopsis - - BS EN 60204-32:2008- 7 - EN 60204-32:2008 Publication Year Title EN/HD Year ISO 12100-1 -1)Safety of machinery - Basic concepts, general pr

47、inciples for design - Part 1: Basic terminology, methodology EN ISO 12100-1 20032)ISO 12100-2 2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles EN ISO 12100-2 2003 ISO 13849-1 2006 Safety of machinery - Safety-related parts of control systems - P

48、art 1: General principles for design EN ISO 13849-1 2006 ISO 13849-2 2003 Safety of machinery - Safety-related parts of control systems - Part 2: Validation EN ISO 13849-2 2003 ISO 13850 2006 Safety of machinery - Emergency stop - Principles for design EN ISO 13850 2008 ISO 13851 2002 Safety of mach

49、inery - Two-hand control devices - Functional aspects and design principles - - ISO 13852 1996 Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs - - BS EN 60204-32:2008EN 60204-32:2008 - 8 - Annex ZZ (informative) Coverage of Essential Requirements of EC Directives Annex ZZA (informative) Coverage of Essential Requirements of Directive 98/37/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the Eu