EN 60068-2-69-2017 en Environmental testing - Part 2-69 Tests - Test Te Tc Solderability testing of electronic components and printed boards by the wetting balance (force measureme.pdf

《EN 60068-2-69-2017 en Environmental testing - Part 2-69 Tests - Test Te Tc Solderability testing of electronic components and printed boards by the wetting balance (force measureme.pdf》由会员分享，可在线阅读，更多相关《EN 60068-2-69-2017 en Environmental testing - Part 2-69 Tests - Test Te Tc Solderability testing of electronic components and printed boards by the wetting balance (force measureme.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、Environmental testingPart 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (IEC 60068-2-69:2017)BS EN 60068-2-69:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN

2、STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60068-2-69 June 2017 ICS 19.040; 31.190 Supersedes EN 60068-2-54:2006, EN 60068-2-69:2007 English Version Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force

3、 measurement) method (IEC 60068-2-69:2017) Essais denvironnement - Partie 2-69: Essais - Essai Te/Tc: Essai de brasabilit des composants lectroniques et cartes imprimes par la mthode de la balance de mouillage (mesure de la force) (IEC 60068-2-69:2017) Umgebungseinflsse - Teil 2-69: Prfungen - Prfun

4、g Te/TC: Prfung der Ltbarkeit von Bauelementen der Elektronik und Leiterplatten mit der Benetzungswaage (Kraftmessung) (IEC 60068-2-69:2017) This European Standard was approved by CENELEC on 2017-04-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

5、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Stand

6、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are

7、the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Pol

8、and, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenu

9、e Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60068-2-69:2017 E National forewordThis British Standard is the UK implementation of EN 60068-2-69:2017. It is identical to IEC 60068-2-69:2017. It su

10、persedes BS EN 60068-2-54:2006 and BS EN 60068-2-69:2007, which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/501, Electronic Assembly Technology.A list of organizations represented on this committee can be obtained on request to its secretary.This pu

11、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87382 9ICS 19.040; 31.190Compliance with a British Standard cannot confer

12、immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60068269:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

13、 EN 60068-2-69 June 2017 ICS 19.040; 31.190 Supersedes EN 60068-2-54:2006, EN 60068-2-69:2007 English Version Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (IEC 60068-2-69:201

14、7) Essais denvironnement - Partie 2-69: Essais - Essai Te/Tc: Essai de brasabilit des composants lectroniques et cartes imprimes par la mthode de la balance de mouillage (mesure de la force) (IEC 60068-2-69:2017) Umgebungseinflsse - Teil 2-69: Prfungen - Prfung Te/TC: Prfung der Ltbarkeit von Bauele

15、menten der Elektronik und Leiterplatten mit der Benetzungswaage (Kraftmessung) (IEC 60068-2-69:2017) This European Standard was approved by CENELEC on 2017-04-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta

16、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (E

17、nglish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees

18、 of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia

19、, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELE

20、C All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60068-2-69:2017 E BS EN 60068269:2017EN 60068-2-69:2017 2 European foreword The text of document 91/1405/FDIS, future edition 3 of IEC 60068-2-69, prepared by IEC/TC 91 “Electronics assembly

21、 technology“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60068-2-69:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-11 late

22、st date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-11 This document supersedes EN 60068-2-69:2007 and EN 60068-2-54:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELE

23、C shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60068-2-69:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to

24、 be added for the standards indicated: IEC 60068-3-13:2016 NOTE Harmonized as EN 60068-3-13:2016 (not modified). IEC 61190-1-1:2002 NOTE Harmonized as EN 61190-1-1:2002 (not modified). ISO 9453:2014 NOTE Harmonized as EN ISO 9453:2014 (not modified). BS EN 60068269:2017EN 60068-2-69:2017 2 European

25、foreword The text of document 91/1405/FDIS, future edition 3 of IEC 60068-2-69, prepared by IEC/TC 91 “Electronics assembly technology“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60068-2-69:2017. The following dates are fixed: latest date by which the document has t

26、o be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-11 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-11 This document supersedes EN 60068-2-69:2007 and EN 60068-2-54:2006. A

27、ttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60068-2-69:2017 was approved by CENE

28、LEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-3-13:2016 NOTE Harmonized as EN 60068-3-13:2016 (not modified). IEC 61190-1-1:2002 NOTE Harmonized as EN 61190-1-1:2002 (not mod

29、ified). ISO 9453:2014 NOTE Harmonized as EN ISO 9453:2014 (not modified). EN 60068-2-69:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this docum

30、ent and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated

31、 by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60068-2-2

32、 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-20 2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 2008 IEC 60068-2-66 - Environmental testing - Part 2

33、-66: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) EN 60068-2-66 - IEC 61190-1-3 2007 Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applicati

34、ons EN 61190-1-3 2007 +A1 2010 +A1 2010 ISO 683 Series Heat treatable steels, alloy steels and free-cutting steels EN ISO 683 Series 1)ISO 6362 Series Wrought aluminium and aluminium alloys extruded rods/bars, tubes and profiles - - 1)At draft stage. BS EN 60068269:2017This page deliberately left bl

35、ank 2 IEC 60068-2-69:2017 IEC 2017 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 General description of the method . 8 4.1 General . 8 4.2 Components . 8 4.3 Printed boards 8 4.4 Measurement 8 5 Description of the test apparatus . 8 6 Preparation of specimens 1

36、0 6.1 Cleaning . 10 6.2 Preconditioning . 10 7 Materials . 11 7.1 Solder . 11 7.1.1 General . 11 7.1.2 Solder alloy containing lead . 11 7.1.3 Lead-free solder alloy 11 7.1.4 Solder contamination control . 11 7.1.5 Solder mass for solder globule wetting balance method . 12 7.2 Flux 13 7.2.1 Rosin ba

37、sed flux 13 7.2.2 Flux maintenance 13 7.2.3 Test flux selection criteria 13 8 Procedure 13 8.1 Test temperature 13 8.1.1 Solder alloy containing lead . 13 8.1.2 Lead-free solder alloy 13 8.2 Test procedure 13 8.2.1 Applicable test procedure 13 8.2.2 Solder bath wetting balance procedure 14 8.2.3 Sol

38、der globule wetting balance procedure 17 8.2.4 Procedure for testing printed board specimens 20 9 Presentation of results . 21 9.1 Form of force versus time trace . 21 9.2 Test requirements . 22 10 Information to be given in the relevant specification . 23 Annex A (normative) Equipment specification

39、 24 A.1 Characteristics of the apparatus 24 A.2 Solder bath . 24 A.3 Globule support blocks . 25 Annex B (informative) Use of the wetting balance for SMD solderability testing 26 B.1 Definition of the measure of solderability 26 B.2 Gauge R any IEC National Committee interested in the subject dealt

40、with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by

41、 agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3)

42、 IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are

43、 used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and th

44、e corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsib

45、le for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committ

46、ees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications

47、. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

48、rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60068-2-69 has been prepared by IEC technical committee 91: Electronics assembly technology. This third edition cancels and replaces the second edition published in 2007 as well as the

49、 second edition of IEC 60068-2-54 published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: integration of IEC 60068-2-54; inclusion of tests of printed boards; inclusion of new component types, and updating test parameters for the whole component list; BS EN 60068269:2017IEC 60068-2-69:2017 IEC 2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENVIRONMENTAL TESTING Part 2-69: Tests Test Te/T