EN 50514-2008 en Audio video and information technology equipment - Routine electrical safety testing in production (Remains Current)《音频 视频和信息技术设备 生产中的常规电气安全性试验[替代 CENELEC EN 50116.pdf

《EN 50514-2008 en Audio video and information technology equipment - Routine electrical safety testing in production (Remains Current)《音频 视频和信息技术设备 生产中的常规电气安全性试验[替代 CENELEC EN 50116.pdf》由会员分享，可在线阅读，更多相关《EN 50514-2008 en Audio video and information technology equipment - Routine electrical safety testing in production (Remains Current)《音频 视频和信息技术设备 生产中的常规电气安全性试验[替代 CENELEC EN 50116.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Audio, video and informationtechnology equipment Routine electrical safetytesting in productionBS EN 50514:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is the UK implementation of EN 5

2、0514:2008. It supersedes BS EN 50116:2006 and BS EN 50333:2001, which will be withdrawn on 1 July 2011.The UK participation in its preparation was entrusted to Technical CommitteeEPL/108, Safety of electronic equipment within the field of audio/video,information technology and communication technolo

3、gy.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 61447 7ICS 33.160.01; 35.020BRITISH ST

4、ANDARDBS EN 50514:2008Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on Amendments issued since publicationAmd. No. Date Text affectedMarch31 2009EUROPEAN STANDARD E

5、N 50514 NORME EUROPENNE EUROPISCHE NORM November 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights

6、of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50514:2008 E ICS 33.160.01 Supersedes EN 50116:2006 and EN 50333:2001English version Audio, video and information technology equipment - Routine electrical safety testing in production Appareils audio, v

7、ido et matriel de traitement de linformation - Essais individuels de srie, en production, pour la vrification de la scurit lectrique Audio- und Video- Gerte und Einrichtungen der Informationstechnik - Stckprfungen der elektrischen Sicherheit in der Fertigung This European Standard was approved by CE

8、NELEC on 2008-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand

9、ards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and noti

10、fied to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

11、a, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 50514:2008EN 50514:2008 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 108X, Safety of electronic equipment wit

12、hin the fields of audio/video, information technology and communication technology. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50514 on 2008-07-01. This European Standard supersedes EN 50116:2006 and EN 50333:2001; it is a combination of

13、the current requirements in EN 50116 and EN 50333. No new requirements were added that were not part of these standards. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-0

14、7-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-07-01 This European Standard applies to equipment that complies with EN 60065 or EN 60950-1. Most of the tests specified in those standards are TYPE TESTS. For ROUTINE TESTS, to be carried out du

15、ring or after manufacture, TYPE TESTS may not be suitable. Nevertheless it is recognized that some tests are necessary in order to guarantee an acceptable level of safety. This European Standard defines ROUTINE TESTS to measure the resistance of the earthing path and to check the insulation between

16、the PRIMARY CIRCUIT and accessible conductive parts. In addition, this European Standard defines the documentation to be maintained by the manufacturer in respect of these tests. This standard is complementary to the product safety standards (EN 60065 or EN 60950-1) and is to be considered only as a

17、 tool for voluntary application by manufacturers. This European Standard can be used in association with Permanent Document CIG 021, Factory inspection procedures - Harmonised requirements, of the European Electrical Products Certification Association. Permanent Document CIG 021 can be obtained from

18、 signatory bodies (certification bodies). In this European Standard, the following print types are used: - normative text: roman type; - test specifications: italic type; - terms which are defined in EN 60065 or EN 60950-1: SMALL CAPITALS. _ BS EN 50514:2008 3 EN 50514:2008 Contents 1 Scope . 4 2 No

19、rmative references . 4 3 Definitions . 4 4 Conformance 4 5 Routine tests . 5 5.1 Resistance of protective earthing paths 5 5.2 Electric strength test 5 6 Records of tests . 6 BS EN 50514:2008EN 50514:2008 4 1 Scope This European Standard defines routine test procedures for use during or after manufa

20、cturing of complete equipments, sub-assemblies or components, certified or declared as complying with EN 60065 or EN 60950-1 and powered by an a.c. or d.c. mains supply. It defines the ROUTINE ELECTRICAL SAFETY TESTs and their procedures to be applied during or at the end of the manufacturing proces

21、s of apparatus certified or declared as complying with EN 60065 or EN 60950-1. The application of the tests detailed in this European Standard is design dependent and needs to be defined by the manufacturer. 2 Normative references The following referenced documents are indispensable for the applicat

22、ion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Publication Year Title EN 60065 A1 A11 2002 2006 2008 Audio, video and similar electronic apparatus - Safety requireme

23、nts (IEC 60065:2001, mod.) (IEC 60065:2001/A1:2005, mod.) EN 60950-1 2001 Information technology equipment - Safety Part 1: General requirements (IEC 60950-1:2001, mod.) EN 60950-1 2006 Information technology equipment - Safety Part 1: General requirements (IEC 60950-1:2005, mod.) 3 Definitions For

24、the purposes of this document, the terms and definitions of EN 60065 or EN 60950-1 apply. In addition, the following definition applies: 3.1 routine electrical safety test test to which each individual device is subjected during or at the end of manufacture, to detect manufacturing failures and unac

25、ceptable tolerances in manufacturing and materials 4 Conformance In order to conform to this European Standard, an equipment shall pass the tests of Clause 5 where applicable and the results of these tests shall be recorded according to Clause 6. BS EN 50514:2008 5 EN 50514:2008 5 Routine tests 5.1

26、Resistance of protective earthing paths For CLASS I apparatus, the continuity of the protective earthing connection shall be checked between the protective earth contact of the MAINS plug or appliance inlet, or the PROTECTIVE EARTHING TERMINAL in case of a PERMANENTLY CONNECTED APPARATUS, and the AC

27、CESSIBLE conductive parts, including TERMINALs regarded as ACCESSIBLE, which shall be connected to the PROTECTIVE EARTHING TERMINAL, and the protective earth contact of the socket-outlets respectively, if provided to deliver power to other apparatus. The test current is 150 % of the rating of the ov

28、ercurrent device protecting the PROTECTIVE BONDING CONDUCTOR, but not less than 10 A and not more than 25 A (a.c. or d.c.) and is applied for any duration between 1 s and 4 s. The source shall have a no-load voltage not exceeding 12 V. The measured resistance shall not exceed 0,1 . It is permitted t

29、o include the power cord (if any) in the resistance measurement and, if the result exceeds 0,1 , to subtract the resistance of the PROTECTIVE EARTHING CONDUCTOR of the power cord. NOTE Care should be taken that the contact resistance between the tip of the measuring probe and the conductive part und

30、er test does not influence the test result. 5.2 Electric strength test ROUTINE TESTS for electric strength shall be carried out between the PRIMARY CIRCUIT and ACCESSIBLE conductive parts. For ACCESSIBLE SECONDARY CIRCUITS, it is permitted to test separately, before final assembly, subassemblies and

31、 components, such as transformers, if the relevant insulation cannot be tested in the complete equipment, provided that the complete equipment complies with EN 60065 or EN 60950-1 as appropriate. The insulation of the apparatus shall be checked by the following test. An a.c. test voltage of substant

32、ially sine-wave form, having MAINS frequency, or a d.c. test voltage or a combination of both with a peak value as specified in Table 1, is applied between the supply TERMINALs connected in parallel and TERMINALs regarded as ACCESSIBLE, and ACCESSIBLE conductive parts respectively, which may become

33、HAZARDOUS LIVE in the event of an insulation fault as a result of incorrect assembly. NOTE 1 TERMINALS regarded as ACCESSIBLE and ACCESSIBLE conductive parts may be connected together during the electric strength test. Table 1 Test voltage Application of test voltage Test voltage V (peak) AC or DC B

34、ASIC INSULATION 2 120(1 500 V r.m.s.) DOUBLE OR REINFORCED INSULATION 4 240 (3 000 V r.m.s.) NOTE The test voltages given are the minimum test voltages to be applied. Higher voltages are allowed at the discretion of the manufacturer. BS EN 50514:2008EN 50514:2008 6 Before the test voltage is applied

35、, intimate contact shall be made between the specimen and the connection devices. Initially it is allowed to apply not more than half of the prescribed test voltage, then it is raised with a steepness not exceeding 1 560 V/ms to the full value which is held for 1 s to 4 s. NOTE 2 A steepness of 1 56

36、0 V/ms corresponds to the steepness of a sine-wave with a MAINS frequency of 60 Hz. During the test, MAINS switches and functional switches CONDUCTIVELY CONNECTED TO THE MAINS, if any, shall be in the on-position and it shall be ensured by suitable means that the test voltage is effectively connecte

37、d to the specimen. No flash-over or breakdown shall occur during the test. The test voltage source shall be provided with a current sensing (over-current) device which, when activated, gives an indication “unacceptable“. When loaded up to and including the tripping current, the voltage source shall

38、still deliver the prescribed voltage. NOTE 3 The tripping current shall not exceed 100 mA. Tripping of the current sensing device is regarded as a flash-over or breakdown. 6 Records of tests All test results shall be kept available. The choice of support and format for reports is left to the manufac

39、turer; separate forms (one for each apparatus) or lists of apparatus, grouped according to the most suitable parameters (periods of time, model, etc.) are equally acceptable. The only obligation is the availability of data and their immediate interpretability for all apparatus leaving the production

40、 line. The following data shall be retrievable and/or be derived from factory procedures for each test: date of test, model of the apparatus, serial number of the equipment or another identifier permitting the identification without ambiguity, location of the point tested, value of earthing circuit

41、resistance with the corresponding current value (*), value of voltage applied during the electric strength test (*), quick-reference information that the whole set of tests has/has not been successful. As an alternative to the values marked with an asterisk (*) above, a record of the result of each

42、test (pass or fail) is permitted. BS EN 50514:2008This page deliberately left blankBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards In

43、stitution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the co

44、nstant aim of BSI to improve the quality of our products andservices. We would be grateful if anyone finding an inaccuracy orambiguity while using this British Standard would inform the Secretary ofthe technical committee responsible, the identity of which can be foundon the inside front cover.Tel:

45、+44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400BSI offers members an individual updating service called PLUS whichensures that subscribers automatically receive the latest editions ofstandards.Buying standardsOrders for all BSI, international and foreign standards publicationsshould be addressed to BSI

46、 Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: You may also buy directly using a debit/credit card from the BSI Shopon the website response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British

47、 Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library.Various BSI electronic information services are also available which givedetails on all its products and services. Contact the

48、Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact MembershipAdministration. Tel: +

49、44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of thepublications of