EN 50377-4-2-2011 en Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2 Type SC APC simplex 8 erminate.pdf

《EN 50377-4-2-2011 en Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2 Type SC APC simplex 8 erminate.pdf》由会员分享，可在线阅读，更多相关《EN 50377-4-2-2011 en Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2 Type SC APC simplex 8 erminate.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50377-4-2:2011Connector sets and interconnect components to be used in optical fibre communication systems Product specificationsPart 4-2: Type SC/APC simplex 8 terminated

2、on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category UBS EN 50377-4-2:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN50377-4-2:2011.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/86/

3、2, Fibre optic interconnecting devices and passivecomponents.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI

4、2011ISBN 978 0 580 65345 2ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate Text affectedBS EN 503

5、77-4-2:2011EUROPEAN STANDARD EN 50377-4-2 NORME EUROPENNE EUROPISCHE NORM March 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels

6、 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-4-2:2011 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2:

7、 Type SC/APC simplex 8 terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produits - Partie 4 2: Type simplex S

8、C/APC 8 degrs cbl sur une fibre unimodale de types B1.1 et B1.3 selon la CEI 60793-2-50, avec frule en zircone plein de catgorie U Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 4 2: Bauart SC-APC-Simplex, 8, zum Anschluss an Einmode

9、nfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Zirkoniumdioxyd-Ferrule fr die Kategorie U This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stand

10、ard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, Fren

11、ch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium,

12、Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN

13、50377-4-2:2011EN 50377-4-2:2011 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50377-4-2 on 2011-01-02

14、. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at na

15、tional level by publication of an identical national standard or by endorsement (dop) 2012-01-02 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-01-02 _ BS EN 50377-4-2:2011 3 EN 50377-4-2:2011 Connector sets and interconnect components to be used

16、in optical fibre communication systems Product specifications Part 4-2: Type SC/APC simplex 8 terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Description Performance Coupling mechanism: Push-pull Application: For use in EN Category U (uncon

17、trolled environment) Configuration: Plug/adaptor/plug Attenuation grades: (random mate) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements Fibre category: EN 60793-2-50 Types B1.1 and B1.3 Cable type: See Table 3 Return loss grade: (random mate) 1: 60 d

18、B mated 55 dB unmated Related documents: EN 60794-2 Optical fibre cables Part 2: Indoor cables Sectional specification (IEC 60794-2) EN 61300 series Fibre optic interconnecting devices and passive components Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnect

19、ing devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-4 Fibre optic connector interfaces Part 4: Type SC connector family (IEC 61754-4) EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for s

20、ingle mode non-dispersion shifted fibres General and guidance (IEC 61755-1) EN 61755-3-2:2009 Fibre optic connector optical interfaces Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2:2006, mod. + co

21、rr. Jan. 2009) ETSI EN 300 019 series Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment ETSI TS 100 671 Transmission and Multiplexing (TM); Passive optical components; Optical fibre connectors for single mode optical fibre communication

22、 systems; Common requirements and conformance testing Outline and maximum dimensions: 68 REF.58 MAX.79 REF.60 MAX.BS EN 50377-4-2:2011EN 50377-4-2:2011 4 Contents 1 Scope 61.1 Product definition . 61.2 Intermateability 61.3 Operating environment 61.4 Reliability . 61.5 Quality assurance 62 Normative

23、 references 73 Description . 83.1 General 83.2 Plug . 83.3 Adaptor 83.4 Materials 83.5 Dimensions 83.6 Colour and marking . 84 Variants . 94.1 Terminated plug 94.2 Adaptor 95 Dimensional requirements . 105.1 Outline dimensions 105.2 Mating face and other limit dimensions . 126 Tests . 206.1 Sample s

24、ize . 206.2 Test and measurement methods 216.3 Test sequence . 216.4 Pass/fail criteria . 217 Test report 218 Product qualification requirements . 218.1 Dimensional and marking requirements 218.2 Optical performance requirements 228.3 Mechanical performance requirements . 238.4 Environmental perform

25、ance requirements 27Annex A (informative) Attenuation against reference 29A.1 Test details 29A.2 Reference connector details 29Annex B (normative) Adaptor matched reference plug details 30Annex C (normative) Sample size and product sourcing requirements . 31Annex D (informative) Zirconia ferrule res

26、ponse surface . 32Bibliography 33BS EN 50377-4-2:2011 5 EN 50377-4-2:2011 Figures Figure 1 Outline dimensions Plug . 10Figure 2 Outline dimensions 11Figure 3 Plug mating face and other limit dimensions . 12Figure 4 Adaptor mating face and other limit dimensions . 14Figure 5 Ferrule endface geometry

27、after termination 16Figure 6 Positioning of fibre core . 17Figure 7 Ferrule end face geometry Allowable undercut 18Figure 8 Requirements for the attenuation grades for the plug fibre core connected to the ideal reference . 19Figure 9 Pin gauge for adaptor 20Figure D.1 Radius vs. undercut and apex of

28、fset 32Tables Table 1 Ensured level of random attenuation 6Table 2 Preferred colour scheme 8Table 3 Plug variants . 9Table 4 Adaptor variants 9Table 5 Optical interface parameter values for APC ferrules 16Table 6 Geometrical parameters . 17Table 7 Optical performance requirements . 22Table 8 Mechani

29、cal performance requirements 23Table 9 Environmental performance requirements . 27Table A.1 Test details for reference connectors 29Table C.1 Sample size and product sourcing requirements 31BS EN 50377-4-2:2011EN 50377-4-2:2011 6 1 Scope 1.1 Product definition This European Standard contains the ini

30、tial, start of life dimensional, optical, mechanical and environmental performance requirements which a connector terminated with cylindrical zirconia 8 angled PC ferrule and assembled singlemode resilient alignment sleeve SC-APC simplex connector set (plug/adaptor/plug), adaptor and patchcord must

31、meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.6. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level

32、 of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation cannot be ass

33、ured to be any better than the worst attenuation grade. The intermating of a grade C plug with a grade B plug will result in an uncertain level of random attenuation performance. Table 1 Ensured level of random attenuation Plug variant / Attenuation grade C B C C C B C B 1.3 Operating environment Th

34、e tests selected combined with the severities and durations are representative of a category U environment described in EN 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reli

35、ability of the product. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. BS EN 5

36、0377-4-2:2011 7 EN 50377-4-2:2011 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) a

37、pplies. EN 60793-2-50 Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres (IEC 60793-2-50) EN 61300-2-1 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) (IEC 613

38、00-2-1) EN 61300-2-2 Part 2-2: Tests Mating durability (IEC 61300-2-2) EN 61300-2-4 Part 2-4: Tests Fibre/cable retention (IEC 61300-2-4) EN 61300-2-5 Part 2-5: Tests Torsion/twist (IEC 61300-2-5) EN 61300-2-6 Part 2-6: Tests Tensile strength of coupling mechanism (IEC 61300-2-6) EN 61300-2-7 Part 2

39、-7: Tests Bending moment (IEC 61300-2-7) EN 61300-2-12 Part 2-12: Tests Impact (IEC 61300-2-12) EN 61300-2-17 Part 2-17: Tests Cold (IEC 61300-2-17) EN 61300-2-18 Part 2-18: Tests Dry heat High temperature endurance (IEC 61300-2-18) EN 61300-2-22 Part 2-22: Tests Change of temperature (IEC 61300-2-2

40、2) EN 61300-2-26 Part 2-26: Tests Salt mist (IEC 61300-2-26) EN 61300-2-27 Part 2-27: Tests Dust Laminar flow (IEC 61300-2-27) EN 61300-2-42 Part 2-42: Tests Static side load for connectors (IEC 61300-2-42) EN 61300-2-44 Part 2-44: Tests Flexing of the strain relief of fibre optic devices (IEC 61300

41、-2-44) EN 61300-2-46 Part 2-46: Tests Damp heat cyclic (IEC 61300-2-46) EN 61300-3-6 Part 3-6: Examinations and measurements Return loss (IEC 61300-3-6) EN 61300-3-10 Part 3-10: Examinations and measurements Gauge retention force (IEC 61300-3-10) EN 61300-3-15 Part 3-15: Examinations and measurement

42、s Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15) EN 61300-3-16 Part 3-16: Examinations and measurements Endface radius of spherically polished ferrules (IEC 61300-3-16) EN 61300-3-23 Part 3-23: Examination and measurements Fibre position relative to ferrule endface (IEC 6130

43、0-3-23) EN 61300-3-28 Part 3-28: Examinations and measurements Transient loss (IEC 61300-3-28) EN 61300-3-34 Part 3-34: Examinations and measurements Attenuation of random mated connectors (IEC 61300-3-34) EN 61300-3-42 Part 3-42: Examinations and measurements Attenuation of single mode alignment sl

44、eeves and or adaptors with resilient alignment sleeves (IEC 61300-3-42) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards (IEC 61753-1) ISO 8015 Technical drawings Fundamental tolerancing principle BS EN

45、50377-4-2:2011EN 50377-4-2:2011 8 3 Description 3.1 General The SC-APC connector is a single position plug connector set of plug/adaptor/plug configuration characterised by a cylindrical, spring loaded butting ferrule of 2,5 mm nominal diameter and a latched push-pull coupling mechanism. The optical

46、 alignment mechanism of the connectors is of a resilient sleeve style. 3.2 Plug The plug features a cylindrical zirconia ceramic ferrule and a push-pull coupling mechanism. The plug housing has a single male key, which is used to limit the relative rotation between mated plugs. A cover (dust cap) to

47、 protect the ferrule end face when the connector is in the unmated condition shall be provided. 3.3 Adaptor The adaptor has a zirconia ceramic resilient alignment sleeve. The mounting style is a rectangular flange simplex. Covers (dust caps) are provided to protect each port of the adaptor. 3.4 Mate

48、rials Materials which are not specified or which are not specifically described are left to the discretion of the manufacturer. 3.5 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensions are not in agreement with an IEC Interface Standard this is clearly stated. 3.6 Colour and marking Marking of the product shall be i