EN 50377-2-1-2001 en Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product Specifications Part 2-1 Type FC-PC Terminated on IEC 60.pdf

《EN 50377-2-1-2001 en Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product Specifications Part 2-1 Type FC-PC Terminated on IEC 60.pdf》由会员分享，可在线阅读，更多相关《EN 50377-2-1-2001 en Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product Specifications Part 2-1 Type FC-PC Terminated on IEC 60.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 50377-2-1:2001 Incorporating Corrigendum No. 1 Connectors sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre The European Standard EN 50377-2-1:20

2、01 has the status of a British Standard ICS 33.180.20 BS EN 50377-2-1:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 09 November 200

3、1 BSI 4 October 2002 ISBN 0 580 38627 9 National foreword This British Standard is the official English language version of EN 50377-2-1:2001, including Corrigendum March 2002. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2

4、, Fibre optic interconnecting devices and passive components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred

5、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions

6、 of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for c

7、hange, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright

8、date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 13875 Corrigendum No. 1 4 October 2002 Changes to Figure 7 and 5.2.4EUROPEAN STANDARD EN 50377-2-1 NORME EUROPENNE EUROPISCHE NORM August 2001 CENELEC European Comm

9、ittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC

10、 members. Ref. No. EN 50377-2-1:2001 E ICS 33.180.20 Incorporating corrigendum March 2002 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre

11、Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit Partie 2-1: Type FC-PC cbls sur fibres unimodales de catgorie B1 de la CEI 60793-2 Steckverbinder zur Verwendung in Lichtwellenleiter-Kommunikations- systemen -

12、 Produktnormen Teil 2-1: Bauart FC-PC zum Anschlu von Einmodenfasern nach IEC 60793-2, Kategorie B1 This European Standard was approved by CENELEC on 2000-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan

13、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, Fre

14、nch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium,

15、 Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 50377-2-1:2001 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic

16、connectors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 186500 on 2000-01-01. According to the new numbering scheme accepted by the 107th Technical Board of CENELEC, the standard was renamed EN 50377-2-1. The following dates were fixed: -

17、latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-03-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2003-01-01 _- 3 - EN 50377-2-1:2001 PRODUCT SPECIFI

18、CATION FOR CONNECTOR SET TO BE USED IN SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS Type: FC-PC terminated on IEC 60793-2 category B1 fibre Description Performance Coupling mechanism: screw Configuration: plug/adaptor/plug Fibre Category: IEC 60793-2 type B1 Cable Type see table 3 Application: At

19、tenuation Grades: (Random Mate) Return Loss Grades: For use in IEC 61753-2-1 category U and ES 300 671 environments (see 1.3) P: 0,35dB mean. 1,0dB Q: 0,30dB mean. 0,60dB for 99% of measurements S: 26dB T: 35dB U: 50dB Related documents: IEC 61754-13 Basic Standard for Interface Dimensions - Part 13

20、 Type FC/PC IEC 61753 Performance Standard - Part 1 General and Guidance EN 186000 Generic Specification for Fibre Optic Connectors EN 61300- Basic Test and Measurement Procedures IEC 60793-2 Optical Fibres Part 2 Product Specifications IEC 60794-2 Optical Fibre Cables - Part 2 Product Specification

21、s ETS 300 671 Fibre optical connectors for single-mode optical fibre communication systems. Outline and maximum dimensions:61 REF 83 REF 36 MAX 58 MAX R25 MIN R25 MINEN 50377-2-1:2001 - 4 - CONTENTS 1 Scope 5 1.1 Product definition .5 1.2 Intermateability.5 1.3 Operating environment .5 1.4 Reliabili

22、ty .5 1.5 Quality assurance6 2 Related documents63 Description .6 3.1 Plug.6 3.2 Adaptor .6 3.3 Materials .6 3.4 Dimensions .7 3.5 Colour and marking 74 Variants.7 4.1 Terminated plug7 4.2 Adaptor .8 4.3 Identification of variants.85 Dimensional requirements10 5.1 Outline dimensions .10 5.1.1 Plug v

23、ariants10 5.1.2 Adaptor variants11 5.2 Mating face and other limit dimensions .13 5.2.1 Plug .13 5.2.2 Ferrule endtip geometry after termination 15 5.2.3 Positioning of fibre core17 5.2.4 Control of fibre axis18 5.2.5 Adaptor .19 5.2.6 Pin gauge for adaptor 216 Tests22 6.1 Sample size .22 6.2 Test a

24、nd measurement methods22 6.3 Test sequence22 6.4 Pass/fail criteria 227 Test report.228 Testing requirements 23 8.1 Dimensional requirements23 8.2 Optical performance requirements23 8.3 Mechanical performance requirements.25 8.4 Environmental performance requirements29Annex A - Reference connector d

25、etails32 Annex B - Sample size and product sourcing requirements 32- 5 - EN 50377-2-1:2001 1S c o p e 1.1 Product definition This specification contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode

26、resilient alignment sleeve FC/PC connector set (plug adaptor plug) must meet in order for it to be categorised as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in 3.5. 1.2 Intermateability Although all products conforming

27、to the requirements of this specification will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1 The intention is that this will be true irrespective of the manufacturing source(s) of the product. In all cases, the intermating of plug va

28、riants having different attenuation grades will result in an uncertain level of random attenuation performance. Similarly, when intermating plug variants having different return loss grades, the resulting level of return loss cannot be assured to be any better than the worst return loss grade. Table

29、 1 - Ensured level of random attenuation Plug variant/attenuation grade P Q PP Q Q 1.3 Operating environment The tests selected combined with the severities and durations are representative of an external weather protected environment defined by - IEC 61753-1-2 category U: uncontrolled environment -

30、 ES 300 671 external weather protected environment defined by ES 300 019 8 classes 3.3, 3.4 and 3.5. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. Th

31、is should be predicted using a recognised reliability assessment programme.EN 50377-2-1:2001 - 6 - 1.5 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Rel

32、ated documents IEC 61754-13 Basic Standard for interface dimensions - Part 13 Type FC/PC IEC 61753 Performance Standard - Part 1: General and guidance EN 186000 Generic Specification for fibre optic connectors EN 61300-X Basic test and measurement pProcedures IEC 60793-2 Optical fibres Part 2 Produc

33、t Specifications IEC 60794-2 Optical fibre cables - Part 2 Product Specifications ETS 300-671 Fibre optical connectors for single-mode optical fibre communication systems 3 Description The FC/PC connector is a single position plug connector set of plug adaptor plug configuration characterised by a c

34、ylindrical, spring loaded butting ferrule of 2,5 mm typical diameter and a screw coupling mechanism. The optical alignment mechanism of the connector is of a resilient sleeve style 3.1 Plug The plug features a cylindrical zirconia ceramic ferrule and a screw thread coupling mechanism. It has a singl

35、e male key that is used to limit and may be used to orientate, the relative rotation between mated connectors. A cover (dustcap) to protect the ferrule endface when the connector is in the unmated condition shall be provided. 3.2 Adaptor The adaptor has a zirconia ceramic resilient alignment sleeve.

36、 The mounting style can be: i square flange - 4 hole ii square flange - 2 hole iii single “d-hole” fixing with back nut iv double “d-hole” fixing with back nut Covers (dustcaps) shall be provided to protect each port of the adaptor. 3.3 Materials Materials which are not specified or which are not sp

37、ecifically described are left to the discretion of the manufacturer.- 7 - EN 50377-2-1:2001 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performance are specified. All other dimensions are left to the discretion of the manufacturer. Wher

38、e the mating face limit dimensions are not in agreement with an IEC Interface Standard this is clearly stated. 3.5 Colour and marking Marking of the product shall be in accordance with 2.6.2 of EN 186000 in the following order of precedence: a. Identification of manufacturer b. Manufacturing date co

39、de : year/week c. Manufacturers part number d. Variant identification number The following colour scheme is preferred: Table 2 - Preferred colour scheme Coupling nut/adaptor Boot Blue Blue 4 Variants 4.1 Terminated plug The following variants are permitted: Table 3 - Plug variants Variant number Fib

40、re/cable mm Structure Notes P01 0,7 - 1,4 Buffered fibre P02 2,0 0,2 Reinforced Cable P03 2,5 0,2 Reinforced Cable P04 2,8 0,2 Reinforced Cable P05 3,0 0,2 Reinforced Cable P06 3,2 0,2 Reinforced Cable Q01 0,7 - 1,4 Buffered fibre Q02 2,0 0,2 Reinforced Cable Q03 2,5 0,2 Reinforced Cable Q04 2,8 0,2

41、 Reinforced Cable Q05 3,0 0,2 Reinforced Cable Q06 3,2 0,2 Reinforced CableEN 50377-2-1:2001 - 8 - 4.2 Adaptor The following variants are permitted: Table 4 - Adaptor variants Variant number Format A01 Square flange 4 hole A02 Square flange 2 hole A03 single “d-hole” A04 double “d-hole” 4.3 Identifi

42、cation of variants Table 5 - P grade plugs Variant number Performance grade (Return loss) Identification number P01 S EN50377-2-1-P01-S P01 T EN50377-2-1-P01-T P01 U EN50377-2-1-P01-U P02 S EN50377-2-1-P02-S P02 T EN50377-2-1-P02-T P02 U EN50377-2-1-P02-U P03 S EN50377-2-1-P03-S P03 T EN50377-2-1-P0

43、3-T P03 U EN50377-2-1-P03-U P04 S EN50377-2-1-P04-S P04 T EN50377-2-1-P04-T P04 U EN50377-2-1-P04-U P05 S EN50377-2-1-P05-S P05 T EN50377-2-1-P05-T P05 U EN50377-2-1-P05-U P06 S EN50377-2-1-P06-S P06 T EN50377-2-1-P06-T P06 U EN50377-2-1-P06-U- 9 - EN 50377-2-1:2001 Table 6 - Q grade plugs Variant n

44、umber Performance grade (Return loss) Identification number Q01 S EN50377-2-1-Q01-S Q01 T EN50377-2-1-Q01-T Q01 U EN50377-2-1-Q01-U Q02 S EN50377-2-1-Q02-S Q02 T EN50377-2-1-Q02-T Q02 U EN50377-2-1-Q02-U Q03 S EN50377-2-1-Q03-S Q03 T EN50377-2-1-Q03-T Q03 U EN50377-2-1-Q03-U Q04 S EN50377-2-1-Q04-S

45、Q04 T EN50377-2-1-Q04-T Q04 U EN50377-2-1-Q04-U Q05 S EN50377-2-1-Q05-S Q05 T EN50377-2-1-Q05-T Q05 U EN50377-2-1-Q05-U Q06 S EN50377-2-1-Q06-S Q06 T EN50377-2-1-Q06-T Q06 U EN50377-2-1-Q06-U Table 7 - Adaptor variants Variant Number Performance Grade (Attenuation/Return Loss) Identification Number

46、A01 - EN50377-2-1-A01 A02 - EN50377-2-1-A02 A03 - EN50377-2-1-A03 A04 - EN50377-2-1-A04 A05 - EN50377-2-1-A05EN 50377-2-1:2001 - 10 - 5 Dimensional requirements 5.1 Outline dimensions 5.1.1 Plug variants Variant No. P01/Q01Ref. Dimensions Note Min. mm Max. A B C- 0,7 32 36 1,4 Variant Nos. P02/P03/P

47、04/P05/P06, Q02/Q03/Q04/Q05/Q06C A B Ref. Dimensions Note Min. mm Max. A B C- 1,8 54 58 3,4 Figure 1 - Outline dimensions - Plug B A C- 11 - EN 50377-2-1:2001 5.1.2 Adaptor variants Variant No. A01Ref. Dimensions Note Min. mm Max. A 9,4 9,6 B 15,0 15,2 C 14,8 15,0 D M8 x 0,75 K 2,15 2,60 Variant No.

48、 A02Ref. Dimensions Note Min. mm Max. A 9,4 9,6 B 15,0 15,2 C 14,8 15,0 D M8 x 0,75 K 2,15 2,60 Figure 2 -Outline dimensions - adaptor A A B D K C B K D C B B A AEN 50377-2-1:2001 - 12 - Variant No. A03 Panel Cut Out Ref. Dimensions Note Min. mm Max. C 14,8 15,0 D M8 x 0,75 K 2,15 2,60 E 9,1 9,4 F 8

49、,8 9,0 G 8,5 8,7 H 8.8 9,0 J 10,9 11,1 Variant No. A04Panel Cut Out Ref. Dimensions Note Min. mm Max. C 14,8 15,0 D M8 x 0,75 E 9,1 9,4 H 8,8 9,0 J 10,9 11,1 K 2,15 2,60 L 7,9 8,1 M 8,2 8,4 Figure 3 - Outline dimensions - adaptor D K C J H G F E D K C J H L E M- 13 - EN 50377-2-1:2001 5.2 Mating face and other limit dimensions5.2.1 Plug Ref. Dimensions Note Min. mm Max. a 2,4985 2,4995 diameter, 1 b 4,40 4,60 diameter c 5,80 6,00 diameter d 2,9