EN 50291-1-2010 en Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1 Test methods and performance requirements (Incorporates Amendment A1 2012.pdf

《EN 50291-1-2010 en Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1 Test methods and performance requirements (Incorporates Amendment A1 2012.pdf》由会员分享，可在线阅读，更多相关《EN 50291-1-2010 en Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1 Test methods and performance requirements (Incorporates Amendment A1 2012.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 50291-1:2010Electrical apparatus for the detection of carbon monoxide in domestic premises Part 1: Test methods and performance requirementsBS EN 50291-1:2010+A1:2012BS EN

2、50291-1:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50291-1:2010.It supersedes BS EN 50291:2001, which is withdrawn.The UK participation in its preparation was entrusted toTechnical Committee GEL/31/19, Gas detectors.A list of organizations represented

3、on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011 ISBN 978 0 580 63679 0 ICS 13.040.40; 13.120; 13.320; 97.030 Compliance with a British Stand

4、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate Text affectedBS EN 50291-1:2010 BRITISH STANDARDNational forewordThis British Standard is th

5、e UK implementation of EN 50291-1:2010.It su ersedes BS EN 50291:2001, which is withdrawn.The UK participation in its preparation was entrusted toTechnical Committee GEL/31/19, Gas detectors.A list of organizations represented on this committee can beobtained on request to its secretary.This publica

6、tion does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011 ISBN 978 0 580 63679 0 ICS 13.040.40; 13.120; 13.320; 97.030 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard wa

7、s published under the authority of theStandards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate Text affectedBS EN 50291-1:2010 BRITISH STANDARDNa ional forewordBritish Sta dard is the UK implementation of EN 50291-1:2010.It supersedes BS EN 50291:2001, which i

8、s withdrawn.he UK participa ion in its preparation was entrusted toTechnical Committee GEL/31/19, Gas detectors.A list of organizations represen ed on this committee can beobtained on request to its secretary.This publication does not pu po t to include all the necessaryprov sions of a contract. Use

9、rs are responsible for its correctapplication. BSI 2011 ISBN 978 0 580 63679 0 ICS 13.040.40; 13.120; 13.320; 97.030 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stand r was published und r the authority of theStandards Policy and Strategy Committee on

10、 30 April 2011.Amendments issued since publicationDate Text affected1 July 201 .BS EN 50291-1:2010+A1:2012 BRITISH STANDARDi i l tati n of EN 50291-1:2010+A1:2012. It supersedes BS EN 50291-1:2010, whichis withdrawn.he start and finish of text introduce or altered by amendment isindicated in the tex

11、t by tags. Tags indicating changes to CEN textcarry the number of the CEN amendment. For example, text alteredby CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted by TechnicalCommittee EXL/31, Equipment for explosive atmospheres, toSubcommittee EXL/31/1, Gas det

12、ectors.A list of organizations represented on this subcommittee can betai e re est t its secretary.The British Standards Institution 2012. Published by BSI StandardsLimited 201278467 5/corrigenda iss ed since publication31 July 2012 Implementation of CENELEC amendment A1:2012BS EN 50291-1:2010EUROPE

13、AN STANDARD EN 50291-1 NORME EUROPENNE EUROPISCHE NORM April 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All

14、 rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50291-1:2010 E ICS 13.320 Supersedes EN 50291:2001English version Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirement

15、s Appareils lectriques pour la dtection de monoxyde de carbone dans les locaux usage domestique - Partie 1: Mthodes dessais et prescriptions de performances Elektrische Gerte fr die Detektion von Kohlenmonoxid in Wohnhusern - Teil 1: Prfverfahren und Anforderungen an das Betriebsverhalten This Europ

16、ean Standard was approved by CENELEC on 2010-04-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

17、 concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member

18、 into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I

19、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 50291-1:2010+A1June 2012BS EN 50291-1:2010EN 50291-1:2010 2 Foreword This European Standard, prepared by the Tec

20、hnical Committee CENELEC TC 216, Gas detectors, was submitted to the formal vote and was approved by CENELEC as EN 50291-1 on 2010-04-15. This European Standard supersedes EN 50291:2001. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

21、hts. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-15 latest date by whi

22、ch the national standards conflicting with the EN have to be withdrawn (dow) 2013-04-15 _ BS EN 50291-1:2010+A1:2012EN 50291-1:2010+A1:2012Foreword to amendment A1- 3 - EN 50291-1:2010/A1:2012 Foreword This document (EN 50291-1:2010/A1:2012) has been prepared by Technical Committee CLC/TC 216 “Gas d

23、etectors”. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-05-07 latest date by which the national standards conflicting with this document have to be withdrawn (do

24、w) 2015-05-07 This amendment includes the following changes with respect to EN 50291-1:2010: detailed provisions for end-of-life indication; a change in the degree of protection for battery operated apparatus; additional provisions for battery capacity; and editorial changes. Attention is drawn to t

25、he possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 50291-1:2010 3 EN 50291-1:2010 Contents 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4

26、 General requirements .6 4.1 General6 4.2 Construction 7 4.3 Indicators and alarms 7 4.4 Fault signals 8 4.5 Output signal (applicable for type A apparatus only) .8 4.6 Software-controlled apparatus 8 4.7 Labelling and instructions 8 5 Test and performance requirements .10 5.1 General requirements f

27、or tests .10 5.2 Normal conditions for tests11 5.3 Test methods and performance requirements 12 6 Self-contained battery powered apparatus .18 6.1 Battery fault warning 18 6.2 Battery capacity .18 6.3 Battery reversal .19 6.4 Battery connections .19 Annex A (informative) Extended stability test Exam

28、ple protocol 20 A.1 General requirements .20 A.2 Test .20 A.3 Performance requirement .20 Annex B (informative) A-deviations .21 Bibliography 22 Figure Figure 1 Sound level test .17 Tables Table 1 Construction requirements .7 Table 2 Alarm conditions .8 Table 3 Alarm conditions with test gases 11 Ta

29、ble 4 Composition of test gas mixture .15 BS EN 50291-1:2010 3 EN 50291-1:2010 Contents 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 General requirements .6 4.1 General6 4.2 Construction 7 4.3 Indicators and alarms 7 4.4 Fault signals 8 4.5 Output signal (applicable for type A app

30、aratus only) .8 4.6 Software-controlled apparatus 8 4.7 Labelling and instructions 8 5 Test and performance requirements .10 5.1 General requirements for tests .10 5.2 Normal conditions for tests11 5.3 Test methods and performance requirements 12 6 Self-contained battery powered apparatus .18 6.1 Ba

31、ttery fault warning 18 6.2 Battery capacity .18 6.3 Battery reversal .19 6.4 Battery connections .19 Annex A (informative) Extended stability test Example protocol 20 A.1 General requirements .20 A.2 Test .20 A.3 Performance requirement .20 Annex B (informative) A-deviations .21 Bibliography 22 Figu

32、re Figure 1 Sound level test .17 Tables Table 1 Construction requirements .7 Table 2 Alarm conditions .8 Table 3 Alarm conditions with test gases 11 Table 4 Composition of test gas mixture .15 BS EN 50291-1:2010+A1:2012EN 50291-1:2010+A1:2012End-of-life 84.8 9BS EN 50291-1:2010EN 50291-1:2010 4 1 Sc

33、ope This European Standard specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in domestic premises. The apparatus may be mains or battery powered. Such apparatus is intended

34、to warn of an accumulation of CO, enabling the occupant to react before being exposed to significant risk. Additional requirements for apparatus to be used in recreational vehicles and similar premises are specified in EN 50291-2. NOTE For caravan holiday homes EN 50291-1 applies. This European Stan

35、dard specifies two types of apparatus, these are type A to provide a visual and audible alarm and an executive action in the form of an output signal that can be used to actuate directly or indirectly a ventilation or other ancillary device, and type B to provide a visual and audible alarm only. Thi

36、s European Standard excludes apparatus for the detection of combustible gases, other than carbon monoxide itself (see EN 50194-1), for the detection of CO in industrial installations (see EN 45544-1, EN 45544-2 and EN 45544-3) or commercial premises, for CO measurement for smoke and fire detection.

37、2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50270 2006 Electromagne

38、tic compatibility Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen EN 50271 2001 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen Requirements and tests for apparatus using software and/or digital tec

39、hnologies EN 50292 2001 Electrical apparatus for the detection of carbon monoxide in domestic premises Guide on the selection, installation, use and maintenance EN 60335-1 2002 Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN 60529 1991

40、Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 60704-1 1997 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General requirements (IEC 60407-1:1997) BS EN 50291-1:2010+A1:2012EN 50291-1:2010+A1:201220102010BS

41、 EN 50291-1:2010 5 EN 50291-1:2010 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ambient air normal atmosphere surrounding the apparatus 3.2 clean air air which is free of carbon monoxide, interfering and contaminating substances 3.3 domest

42、ic premises any house or building being a place of residence or home of a household, family or person 3.4 fixed installation apparatus which is intended to have all parts except replaceable batteries permanently installed 3.5 sensor assembly in which the sensing element is housed and which may conta

43、in associated circuit components 3.6 sensing element device, the output of which will change in the presence of carbon monoxide 3.7 volume ratio (V/V) ratio of the volume of a component to the volume of the gas mixture 3.8 output signal signal characterised by a standby and an activation state by wh

44、ich action may be initiated, e.g. triggering a ventilation device 3.9 warm-up time time interval between the time when the apparatus is switched on and the time when the apparatus is fully operational 3.10 alarm set point fixed setting of the apparatus that determines the volume ratio and duration o

45、f exposure at which the apparatus will automatically initiate an alarm and, for type A apparatus an output signal 3.11 fault signal visual and/or audible signal indicating a faulty or failed apparatus 3.12 mains-powered apparatus apparatus designed to be powered by the normal domestic mains electric

46、al supply, with or without an alternative power source BS EN 50291-1:2010+A1:2012EN 50291-1:2010+A1:2012BS EN 50291-1:2010EN 50291-1:2010 6 3.13 battery-powered apparatus apparatus designed to be powered by batteries only 3.14 continuous operation apparatus which is continuously powered with continu

47、ous or intermittent automatic sensing 3.15 recreational vehicle recreational vehicles considered by this European Standard include recreational craft, caravans and motor caravans NOTE Other motorised vehicles like trucks are known to have residential accommodation. They are not recreational vehicles

48、 but are considered as similar premises in respect of this European Standard. 3.16 caravan holiday home transportable leisure accommodation vehicle that does not meet requirements for construction and use of road vehicles, that retains means for mobility and that is for temporary or seasonal occupat

49、ion EN 13878:2003 3.17 CO detection apparatus apparatus, which may also be generically termed “gas detector”, comprising the sensor, remote sensor if applicable, alarm and any other circuit components, power supply and, for type A apparatus, a means of providing an output signal 4 General requirements 4.1 General Unless otherwise stated, the requirements specified are applicable to both type A and type B apparatus. The apparatus shall reliably detect the presen