EN 50173-4-2018 en Information technology - Generic cabling systems - Part 4 Homes.pdf

《EN 50173-4-2018 en Information technology - Generic cabling systems - Part 4 Homes.pdf》由会员分享，可在线阅读，更多相关《EN 50173-4-2018 en Information technology - Generic cabling systems - Part 4 Homes.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Information technology - Generic cabling systemsPart 4: HomesBS EN 50173-4:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 50173-4 June 2018 ICS 33.040.50 Supersedes EN 50173-4:2007English Version Information t

2、echnology - Generic cabling systems - Part 4: Homes Technologies de linformation - Systmes de cblage gnrique - Partie 4: Locaux dhabitation Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 4: Wohnungen This European Standard was approved by CENELEC on 2018-03-19. CENELEC me

3、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat

4、ion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELE

5、C Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

6、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

7、 Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50173-4:2018 ENational forewordThis British Standard is the

8、UK implementation of EN 50173-4:2018. It supersedes BS EN 50173-4:2007+A2:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCT/7, Telecommunications - Installation requirements.A list of organizations represented on this committee can be obtained

9、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 51258 2ICS 33.040.50Compliance with a B

10、ritish Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50173-4:2018EUROPEAN STANDARD NO

11、RME EUROPENNE EUROPISCHE NORM EN 50173-4 June 2018 ICS 33.040.50 Supersedes EN 50173-4:2007English Version Information technology - Generic cabling systems - Part 4: Homes Technologies de linformation - Systmes de cblage gnrique - Partie 4: Locaux dhabitation Informationstechnik - Anwendungsneutrale

12、 Kommunikationskabelanlagen - Teil 4: Wohnungen This European Standard was approved by CENELEC on 2018-03-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any a

13、lteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other langua

14、ge made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the C

15、zech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

16、 United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by an

17、y means reserved worldwide for CENELEC Members. Ref. No. EN 50173-4:2018 EBS EN 50173-4:2018BS EN 50173-4:2018EN 50173-4:2018 (E) 2 Contents European foreword 6 Introduction 8 1 Scope and conformance 11 1.1 Scope 11 1.2 Conformance 11 2 Normative references 12 3 Terms, definitions and abbreviations

18、13 3.1 Terms and definitions 13 3.2 Abbreviations 14 4 Structure of the generic cabling system in a home 14 4.1 General 14 4.2 Functional elements 14 4.3 Structure and hierarchy 14 4.4 Cabling subsystems 16 4.4.1 Home cabling subsystems 16 4.4.2 Associated cabling subsystems 17 4.5 Design objectives

19、 18 4.5.1 General 18 4.5.2 Primary home cabling 18 4.5.3 Secondary home cabling 19 4.5.4 Network access cabling 19 4.6 Accommodation of functional elements 19 4.6.1 General 19 4.6.2 Application outlets 20 4.6.3 Distributors 20 4.6.4 Cables 20 4.7 Interfaces 20 4.7.1 Equipment interfaces (EIs) and te

20、st interfaces (TIs) 20 4.7.2 Channels and links 22 4.8 Dimensioning and configuration 22 4.8.1 Distributors 22 4.8.2 Cables 23 4.8.3 Connecting hardware 24 4.8.4 Equipment cords 24 4.8.5 Application outlets 24 4.8.6 External network interfaces 25 5 Requirements for channels in homes 26 BS EN 50173-4

21、:2018EN 50173-4:2018 (E) 3 5.1 General 26 5.2 Environmental performance 26 5.3 Transmission performance 26 5.3.1 General 26 5.3.2 Channel construction 26 5.3.3 Balanced cabling 27 5.3.4 Coaxial cabling 27 5.3.5 Optical fibre cabling channels 27 6 Reference implementations in homes 28 6.1 General 28

22、6.2 Balanced cabling channels 28 6.2.1 General 28 6.2.2 Component choice 28 6.2.3 Dimensions 29 6.3 Optical fibre cabling 30 6.3.1 General 30 6.3.2 Component choice 31 6.3.3 Dimensions 31 6.4 Coaxial cabling 32 7 Requirements for cables in homes 32 7.1 General 32 7.2 Balanced cables of Category 5, 6

23、, 6A, 7, 7A, 8.1, 8.2 and BCT-B 32 7.2.1 General 32 7.2.2 Cables of Category 5, 6, 6A, 7, 7A, 8.1 and 8.2 32 7.2.3 Cables of Category BCT-B 33 7.3 Optical fibre cables of Category OM3, OM4, OM5, OS1a and OS2 33 7.4 Coaxial cables of Category BCT-C 33 8 Requirements for connecting hardware in homes 3

24、3 8.1 General requirements 33 8.2 Balanced connecting hardware 33 8.2.1 General requirements 33 8.2.2 Electrical, mechanical and environmental performance 33 8.3 Optical fibre connecting hardware 34 8.3.1 General requirements 34 8.3.2 Connecting hardware for optical fibres 34 8.4 Coaxial connecting

25、hardware of Category BCT-C 34 8.4.1 General 34 8.4.2 Broadcast Outlet 34 BS EN 50173-4:2018EN 50173-4:2018 (E) 4 8.4.3 Connecting hardware at other locations 34 9 Requirements for cords and jumpers in homes 35 9.1 Jumpers 35 9.2 Balanced cords of Category 5, 6, 6A, 7, 7A, 8.1, 8.2 and BCT-B 35 9.2.1

26、 General 35 9.2.2 Additional requirements for certain cords 35 9.3 Optical fibre cords of Category OM3, OM4, OM5, OS1a and OS2 35 9.4 Coaxial cords of Category BCT-C 35 Annex A (normative) Link performance limits 36 A.1 General 36 A.2 Balanced cabling 36 A.3 Coaxial cabling 36 A.4 Optical fibre cabl

27、ing 36 Annex B (informative) Application-specific bct outlets and baluns 37 B.1 TV outlets for coaxial cabling 37 B.1.1 Double outlet 37 B.1.2 Triple outlet 37 B.2 Baluns for tv applications using 100 balanced cabling channels 37 B.2.1 General 37 B.2.2 Impedance matching balun (100 /75 ) 37 B.2.3 Im

28、pedance matching and frequency splitting balun 37 Annex C (informative) Application-specific networks for audio/video applications 38 C.1 General 38 C.2 Antenna-fed networks 38 C.3 Cable networks (CATV-, MATV- and SMATV-networks and individual receiving networks) 38 C.3.1 System performance of cable

29、 networks 38 C.3.2 Safety requirements for cable networks 38 C.3.3 EMC requirements for equipment and for cable networks 38 Annex D (informative) A-deviations 40 Bibliography 42 Figures Figure 1 Schematic relationship between the EN 50173 series and other relevant standards 8 Figure 2 Structure of t

30、he generic cabling system in a home 15 Figure 3 Hierarchical topology of a generic cabling system in support of ICT and/or BCT applications 15 Figure 4 Examples of interconnection of primary home and network access cabling 17 Figure 5 Network access cabling in premises containing one or more homes 1

31、8 Figure 6 Accommodation of functional elements 20 Figure 7 Equipment and test interfaces in support of ICT and BCT applications . 21 Figure 8 Channels and permanent links within a home 23 BS EN 50173-4:2018EN 50173-4:2018 (E) 5 Figure 9 Reference implementations for ICT and BCT channels (PHD/SHD to

32、 TO/BO) . 29 Figure 10 Primary/secondary home cabling channels 31 Tables Table 1 Contextual relationship between EN 50173 series and other standards relevant for information technology cabling systems . 9 Table 2 Maximum channel lengths for reference implementations of ICT and BCT channels 23 Table

33、3 Channel length equations 30 BS EN 50173-4:2018EN 50173-4:2018 (E) 6 European foreword This document (EN 50173-4:2018) has been prepared by the Technical Committee CENELEC TC 215 “Electrotechnical aspects of telecommunication equipment“ in cooperation with the Technical Committee CENELEC TC 209 “Ca

34、ble networks for television signals, sound signals and interactive services“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-03-19 latest date by which the nationa

35、l standards conflicting with this document have to be withdrawn (dow) 2021-03-19 This document supersedes the text of EN 50173-4:2007 + A1:2010 + A2:2012. The European Standards EN 50173:1995 and EN 50173-1:2002 have been developed to enable the application-independent cabling to support ICT applica

36、tions in office premises. Their basic principles, however, are applicable to other types of applications and in other types of premises. TC 215 has decided to establish relevant European Standards which address the specific requirements of these premises. In order to point out the commonalities of t

37、hese cabling design standards, these EN are published as individual parts of the series EN 50173, thus also acknowledging that standards users recognize the designation “EN 50173” as a synonym for generic cabling design. At the time of publication of this European Standard, series EN 50173 comprises

38、 the following standards: EN 50173-1 Information technology Generic cabling systems Part 1: General requirements EN 50173-2 Information technology Generic cabling systems Part 2: Office spaces EN 50173-3 Information technology Generic cabling systems Part 3: Industrial spaces EN 50173-4 Information

39、technology Generic cabling systems Part 4: Homes EN 50173-5 Information technology Generic cabling systems Part 5: Data centre spaces EN 50173-6 Information technology Generic cabling systems Part 6: Distributed building services Attention is drawn to the possibility that some of the elements of thi

40、s document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This edition of EN 50173-4: a) introduces new components 8.1 and 8.2 for balanced cabling to support new channel Classes I and II as well as optical fibre cabling (OM5

41、) as defined in EN 50173-1:2018; b) revises the functional elements in Clause 4; c) clarifies the relation of generic home cabling systems to the network access cabling subsystem in Clause 4; d) introduces relevant design objectives for home cabling systems; e) introduces cable sharing requirements;

42、 f) removes CCCB cabling and relevant component requirements; BS EN 50173-4:2018EN 50173-4:2018 (E) 7 g) removes Annex B of the previous edition; h) aligns the document structure across the EN 50173 series and updates the document both technically and editorially. BS EN 50173-4:2018EN 50173-4:2018 (

43、E) 8 Introduction The importance of cabling infrastructure is similar to that of other fundamental utilities such as water and energy supply and interruptions to the services provided over that infrastructure can have a serious impact. A lack of design foresight, the use of inappropriate components,

44、 incorrect installation, poor administration or inadequate support can threaten quality of service and have commercial consequences for all types of users. This standard specifies generic cabling within a single home. The home can contain one or more buildings or can be within a building which conta

45、ins more than one home (e.g. one home in a multi-dwelling building). The campus or backbone cabling connecting individual homes within multi-tenant premises is specified according to the relevant standard (for instance EN 50173-1 or EN 60728 series). Generic cabling for distributed building services

46、 in homes is specified in EN 50173-6 which addresses all of the above premises and spaces within them. Figure 1 and Table 1 show the schematic and contextual relationships between the standards produced by TC 215 for information technology cabling, namely: 1) this and other parts of the EN 50173 ser

47、ies; 2) installation (EN 50174 series); 3) bonding (EN 50310). Figure 1 Schematic relationship between the EN 50173 series and other relevant standards BS EN 50173-4:2018EN 50173-4:2018 (E) 9 Table 1 Contextual relationship between EN 50173 series and other standards relevant for information technol

48、ogy cabling systems Building design phase Generic cabling design phase Specification phase Installation phase Operation phase EN 50310 EN 50173-2 EN 50173-3 EN 50173-4 EN 50173-5 EN 50173-6 (these ENs reference general requirements of EN 50173-1) EN 50174-1 EN 50174-2 EN 50174-3 EN 50310 EN 50174-1

49、Planning phase EN 50174-2 EN 50174-3 EN 50310 In addition, a number of Technical Reports have been developed to support or extend the application of these standards, including: CLC/TR 50173-99-1, Cabling guidelines in support of 10 GBASE-T; CLC/TR 50173-99-2, Information technology Implementation of BCT applications using cabling in accordance with EN 50173-4; CLC/TR 50173-99-3, Information technology Generic cabling systems Part 99-3: Home cabling infrastructures up to 50 m in length to s