EN 16587-2017 en Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure.pdf

《EN 16587-2017 en Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure.pdf》由会员分享，可在线阅读，更多相关《EN 16587-2017 en Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure BS EN 16587:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16587 June 2017 ICS 11.180.01; 45.020 English Vers

2、ion Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure Applications ferroviaires - Conception destine lusage par les PMR - Exigences relatives aux cheminements libres dobstacles pour linfrastructureBahnanwendungen - Gestaltung fr die Nutzung durch PRM

3、 - Anforderungen an die Infrastruktur fr hindernisfreie Wege This European Standard was approved by CEN on 23 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit

4、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other

5、 language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D

6、enmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEA

7、N COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16587:2017 ENationa

8、l forewordThis British Standard is the UK implementation of EN 16587:2017.The UK participation in its preparation was entrusted to Technical Committee RAE/1/-/15, Railway Applications - People with Reduced Mobility.A list of organizations represented on this committee can be obtained on request to i

9、ts secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 74366 5ICS 11.180.01; 45.020Compliance with a British

10、Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16587:2017EUROPEAN STANDARD NORME EUROPE

11、NNE EUROPISCHE NORM EN 16587 June 2017 ICS 11.180.01; 45.020 English Version Railway applications - Design for PRM Use - Requirements on obstacle free routes for infrastructure Applications ferroviaires - Conception destine lusage par les PMR - Exigences relatives aux cheminements libres dobstacles

12、pour linfrastructureBahnanwendungen - Gestaltung fr die Nutzung durch PRM - Anforderungen an die Infrastruktur fr hindernisfreie Wege This European Standard was approved by CEN on 23 January 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition

13、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in

14、three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards

15、 bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,

16、 Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means res

17、erved worldwide for CEN national Members. Ref. No. EN 16587:2017 EBS EN 16587:2017EN 16587:2017 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Symbols and abbreviations . 6 5 Requirements . 7 5.1 General 7 5.2 Obstacle-free r

18、outes . 7 5.2.1 General requirements of an obstacle-free route . 7 5.2.2 Horizontal circulation . 8 5.2.3 Vertical circulation 10 5.3 Route identification . 11 5.4 Doors and entrances . 11 5.5 Floor surfaces 11 5.6 Highlighting of transparent obstacles 12 5.7 Toilets and baby nappy changing faciliti

19、es . 12 5.8 Furniture and free-standing devices . 12 5.9 Ticketing, information desks and customer assistance points . 12 5.10 Lighting 13 5.11 Visual Information: Sign posting, Pictograms, Printed or Dynamic Information 13 5.12 Spoken Information 13 5.13 Platform Width and Edge of Platform . 13 5.1

20、4 End of Platform . 15 5.15 Boarding Aids Stored on Platforms . 15 5.16 Passenger track crossings to platforms . 15 Annex A (normative) EC verification 18 A.1 Subsystems . 18 A.1.1 EC verification (general) 18 A.1.2 Procedures for EC verification of a subsystem (modules) 18 Annex B (normative) Summa

21、ry of testing requirements . 19 Annex C (informative) Good Practice . 20 C.1 General . 20 C.2 Design Standards for Accessible Railway Stations: A joint Code of Practice by the Department for Transport (UK) and Transport Scotland March 2015 . 20 C.3 Inclusive Mobility Department for Transport (UK) De

22、cember 2005 . 20 C.4 Specifying a main route 21 C.5 Weather Protection . 21 Annex D (informative) A-Deviations 22 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC 23 Bibliography . 25 BS EN 16587:2017EN 16587:2017 (E) 3 Euro

23、pean foreword This document (EN 16587:2017) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t

24、he latest by December 2017, and conflicting national standards shall be withdrawn at the latest by December 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such pa

25、tent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral

26、part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

27、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16587:2017EN 16587:2017 (E) 4 Introduction This do

28、cument is part of a suite of four Design for PRM Use standards that have in total nine parts: EN 16584 is a standard that covers both Infrastructure and Rolling Stock Railway Applications Design for PRM Use - General Requirements: Part 1: Contrast (EN 16584-1) Part 2: Information (EN 16584-2) Part 3

29、: Optical and Friction Characteristics (EN 16584-3) EN 16585 is a standard that covers Rolling Stock - Railway Applications - Design for PRM Use - Equipment and Components On Board Rolling Stock: Part 1: Toilets (EN 16585-1) Part 2: Elements for Sitting, Standing and Moving (EN 16585-2) Part 3: Clea

30、rways and Internal Doors (EN 16585-3) EN 16586 is a standard that covers Rolling Stock Railway Applications Design for PRM Use - Accessibility of Persons with Reduced Mobility to Rolling Stock: Part 1: Steps for Access and Egress (EN 16586-1) Part 2: Boarding Aids (EN 16586-2) EN 16587 is a standard

31、 that covers Infrastructure Railway Applications Design for PRM Use - Requirements for Obstacle Free Routes for Infrastructure. These standards aim to clarify the requirements (with clear and consistent terms and definitions) and to define the associated criteria and, where appropriate, methodologie

32、s to allow a clear pass/fail assessment. BS EN 16587:2017EN 16587:2017 (E) 5 1 Scope This European Standard describes the specific Design for PRM Use requirements for obstacle-free routes applying to infrastructure and the assessment of those requirements. The following applies to this European Stan

33、dard: The definitions and requirements describe specific aspects of Design for PRM Use required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI; This European Standard defines elements which are universally valid for obstacle-free routes. The definitions and

34、requirements of this European Standard should be used for infrastructure applications; This European Standard only refers to aspects of accessibility for PRM passengers, it does not define general requirements and general definitions; This European Standard assumes that the infrastructure is in the

35、defined operating condition; Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements. This European Standard contains requirements relating to Obstacle-free routes. 2 Normative references The following documents, in whole or in part, are normatively referenced in t

36、his document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 81-70, Safety rules for the construction and installations of lifts - Particular

37、applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability EN 115-1, Safety of escalators and moving walks Part 1: Construction and installation EN 16584-1, Railway applications - Design for PRM use - General requirements - Pa

38、rt 1: Contrast EN 16584-2, Railway applications - Design for PRM use - General requirements - Part 2: Information EN 16584-3, Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics EN 16585-1:2017, Railway Applications Design for PRM Use Equip

39、ment and Components On Board Rolling Stock Part 1: Toilets EN 16586-2, Railway Applications Design for PRM Use Accessibility of Persons with Reduced Mobility to Rolling Stock Part 2: Boarding Aids EN ISO 2813, Paints and varnishes - Determination of gloss value at 20, 60 and 85 (ISO 2813) ISO 21542,

40、 Building construction Accessibility and usability of the built environment BS EN 16587:2017EN 16587:2017 (E) 6 ISO 23599, Assistive products for blind and vision-impaired persons Tactile walking surface indicators 3 Terms and definitions For the purposes of this document, the terms and definitions

41、given in EN 16584-1 and the following apply. 3.1 obstacle-free route link between two or more public areas dedicated to the transport of passengers that can be navigated independently by all persons with disabilities and reduced mobility Note 1 to entry: In order to achieve this, the route can be di

42、vided to better meet the needs of all persons with disabilities and reduced mobility. The combination of all the parts of the obstacle-free route constitutes the route accessible for all persons with disabilities and reduced mobility. 3.2 step free route division of an obstacle-free route that meets

43、 the needs of mobility impaired persons by avoiding changes in level or, when they cannot be avoided, are bridged via ramps or lifts 3.3 weather protection protection against the effects of weather Note 1 to entry: The level of weather protection is regulated by national rules. 4 Symbols and abbrevi

44、ations Table 1 Abbreviations Abbreviation Designation EN European Standard (Euronorm) PRM Persons with disabilities and persons with reduced mobility TSI Technical Specification for Interoperability UIC Union Internationale des Chemins de Fer Table 2 Symbols Symbol Designation Unit km Length kilomet

45、re mm Length millimetre N Force Newton BS EN 16587:2017EN 16587:2017 (E) 7 5 Requirements 5.1 General Assessment of the requirements identified in Clause 5 shall be according to Annex A (EC verification) and Annex B (Summary of testing requirements). Where additional assessment criteria apply, these

46、 will be identified against the relevant clause. All measurements in figures unless otherwise stated shall be in full millimetres. 5.2 Obstacle-free routes 5.2.1 General requirements of an obstacle-free route 1) Obstacle-free routes shall be provided i. that accommodate all categories of PRM on the

47、same route Where there are height changes the route may diverge to accommodate ramps, steps or lifts, for example. The route shall converge after the height changes and continue as a single route, unless the destination has already been reached. For assessment: an example scenario would be moving th

48、rough the station area to the platform area, the route diverges to utilize stairs and a separate lift or ramp to overcome the height change to the elevated walkway; the route converges on the elevated walkway above the tracks, then diverges to stairs and a separate lift or ramp, to overcome the heig

49、ht change back to platform level but there is no necessity to converge the routes again to a single, point as the platform was the destination. ii. at all times, for when trains are timetabled to operate at that station. iii. that interconnect the following public areas of the infrastructure, if provided and during the normal operation of those facilities: a) Stopping points for other connecting modes of transport within the station confines (for example, taxi, bus, tram, m