EN 16361-2013 en Power operated pedestrian doors - Product standard performance characteristics - Pedestrian doorsets other than swing type initially designed for installation with.pdf

《EN 16361-2013 en Power operated pedestrian doors - Product standard performance characteristics - Pedestrian doorsets other than swing type initially designed for installation with.pdf》由会员分享，可在线阅读，更多相关《EN 16361-2013 en Power operated pedestrian doors - Product standard performance characteristics - Pedestrian doorsets other than swing type initially designed for installation with.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 16361:2013Power operated pedestriandoors Product standard,performance characteristics Pedestrian doorsets, other thanswing type, initially designedfor installation with poweroperation without resistanceto fire and smoke leakagecharacteristicsBS EN 16361:2013 BRITISH ST

2、ANDARDNational forewordThis British Standard is the UK implementation of EN 16361:2013. When reference to this Standard has been published in the Official Journal of the European Union (OJEU), compliance with it will confer a presumption of compliance with the Construction Products Regulation.The UK

3、 participation in its preparation was entrusted to Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis

4、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 76730 2ICS 91.060.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publishe

5、d under the authority of the Standards Policy and Strategy Committee on 31 December 2013.Amendments/corrigenda issued since publicationDate Text affectedBS EN 16361:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16361 October 2013 ICS 91.060.50 English Version Power operated pedestrian doo

6、rs - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics Portes motorises pour pitons - Norme de produit, caractristiques de performance - Blo

7、cs-portes pour pitons, autres que de type battant, initialement conus pour une installation avec un systme de motorisation sans caractristiques rsistance au feu ni pare-fume Kraftbettigte Tren - Produktnorm, Leistungseigenschaften - Trsysteme, mit Ausnahme von Drehflgeltren, ohne Eigenschaften bezgl

8、ich Feuerschutz und Rauchdichtheit This European Standard was approved by CEN on 26 July 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-da

9、te lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

10、 under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, For

11、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT

12、 EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16361:2013: EBS EN 16361:2013EN 16361:2013 (E) 2 Content

13、s Page Foreword 4 1 Scope 5 2 Normative references 6 3 Terms and definitions .7 4 Requirements .7 4.1 General 7 4.2 Rate of release of dangerous substances (only for indoor impact) .7 4.3 Impact resistance (only for glazed doors with injury risks) 8 4.4 Height 8 4.5 Direct airborne sound insulation

14、index (only for uses where acoustic performance is declared) .8 4.6 Impact forces (safety in use) 8 4.7 Water tightness (only for external doors) .8 4.8 Resistance to wind load (only for external doors) .9 4.9 Thermal transmittance (only for external doors and for internal doors where the thermal in

15、sulation is declared) 10 4.10 Air permeability (only for external doors and for internal doors where thermal insulation is declared) 10 4.11 Durability . 11 4.11.1 General . 11 4.11.2 Durability . 12 4.12 Electromagnetic compatibility (EMC) . 12 4.13 Other requirements. 13 4.13.1 Glazing . 13 4.13.2

16、 Unframed glass doorsets . 13 4.13.3 Doorsets in escape routes and emergency exits 13 4.13.4 Burglar resistance 13 5 Testing, assessment and sampling methods 13 5.1 General . 13 5.2 Rate of release of dangerous substances (only for indoor impact) 13 5.3 Impact resistance (only for glazed doors with

17、injury risks) . 13 5.4 Height . 13 5.5 Direct airborne sound insulation index (only for uses where acoustic performance is declared) 13 5.6 Impact forces (safety in use) . 13 5.7 Water tightness (only for external doors) 14 5.8 Resistance to wind load (only for external doors) 14 5.9 Thermal transmi

18、ttance (only for external doors and for internal doors where thermal insulation is declared) 14 5.10 Air permeability (only for external doors and for internal doors where thermal insulation is declared) 14 5.11 Durability . 14 5.12 Electromagnetic compatibility (EMC) . 14 5.12.1 Verification 14 5.1

19、2.2 Test for electromagnetic emissions . 14 5.12.3 Tests for immunity to disturbances 15 6 Evaluation of conformity 15 6.1 General . 15 6.2 Initial Type Testing Type Testing . 15 6.2.1 General . 15 6.2.2 Test samples, testing and compliance criteria 16 BS EN 16361:2013EN 16361:2013 (E) 3 6.2.3 Test

20、reports 17 6.3 Factory production control (FPC) 17 6.3.1 General . 17 6.3.2 Requirements . 17 6.3.3 Product specific requirements . 20 6.3.4 Initial inspection of factory and of FPC . 21 6.3.5 Continuous surveillance of FPC for products covered by attestation of conformity system 1 . 22 6.3.6 Proced

21、ure for modifications 22 6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity . 22 Annex A (normative) Standards and draft standards on glass . 24 Annex B (informative) Summary of the characteristics 25 B.1 Summary of the characteristics of pow

22、er operated pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics 25 Annex C (informative) Handling, installation, maintenance and care . 27 Annex D (informative) Summary of classification of

23、characteristics 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 32 ZA.1 Scope and relevant characteristics . 32 ZA.2 Procedure for the attestation of conformity of power operated doorsets, other than swing type, initia

24、lly designed for installation with power operation without resistance to fire and smoke leakage characteristics 36 ZA.2.1 System(s) of attestation of conformity 36 ZA.2.2 EC Certificate and Declaration of conformity . 38 ZA.3 CE marking and labelling . 39 Annex ZB (informative) Relationship between

25、this European Standard and the Essential Requirements of the EMC Directive 43 Bibliography 44 BS EN 16361:2013EN 16361:2013 (E) 4 Foreword This document (EN 16361:2013) has been prepared by Technical Committee CEN/TC 33 “Doors, windows. shutters, building hardware and curtain walling”, the secretari

26、at of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the latest by July 2015. Attention is drawn to th

27、e possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free

28、Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and ZB, which are an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following cou

29、ntries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P

30、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16361:2013EN 16361:2013 (E) 5 1 Scope This European Standard specifies requirements and test/assessment/calculation methods for external and internal power operated pedestrian doorsets, oth

31、er than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics. Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically. These doorsets include power operated pedestrian sliding

32、 doorsets, revolving doorsets, balanced (sliding/swing) doorsets and folding doorsets with one or more horizontally moving leaves. This European Standard applies to power operated pedestrian doorsets with flush or panelled leaves, complete with: integral fanlights, if any; NOTE 1 A fanlight is a pan

33、el over a door which is part of the doorset. side panels that are contained within a single frame for inclusion in a single aperture, if any. The intended uses of the products covered by this European Standard are: doorsets for external use in escape routes and other declared specific uses and/or us

34、es subject to other specific requirements, in particular noise, energy, tightness and safety-in-use in construction works; doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise and safety-in-

35、use in construction works; doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy and safety-in-use in construction works. The products covered by this European Standard are not assess

36、ed for structural applications of the building. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2. This European Standard does not apply to: external pedestrian doorsets according to EN 1435

37、1-1; internal pedestrian doorsets according to prEN 14351-2; fire resistant and/or smoke control doorsets according to prEN 16034; industrial, commercial and garage doors and gates according to EN 13241-1; lifts doorsets; vehicles doorsets; doorsets used in industrial processes; doorsets in partitio

38、n walls; doorsets outside the reach of people (such as crane gantry fences); turnstiles; BS EN 16361:2013EN 16361:2013 (E) 6 platform doorsets. This European Standard does not cover special functions of doorsets (e.g. security, fire aspects in banks, airports, etc.). This European Standard does not

39、deal with any specific requirements on noise emitted from power operated doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics as their noise emission is not considered to be a relevant hazard. NOTE 2 No

40、ise emission of power operated doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics is not a significant hazard for the users of these products. It is a comfort aspect. 2 Normative references The follow

41、ing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1026:2000, Win

42、dows and doors Air permeability Test method EN 1027:2000, Windows and doors Watertightness Test method EN 1627, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classification EN 1863-2, Glass in building Heat strengthened soda lime silicate gla

43、ss Part 2: Evaluation of conformity Product standard EN 12150-2, Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/Product standard EN 12207:1999, Windows and doors Air permeability Classification EN 12208:1999, Windows and doors Watertightness Cl

44、assification EN 12210:1999, Windows and doors Resistance to wind load Classification EN 12211:2000, Windows and doors Resistance to wind load Test method EN 12519:2004, Windows and pedestrian doors Terminology EN 13049, Windows Soft and heavy body impact Test method, safety requirements and classifi

45、cation EN 14179-2, Glass in building Heat soaked thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/Product standard EN 14321-2, Glass in building Thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity Product standard EN 14351-1:2

46、006+A1:2010, Windows and doors Product standard, performance characteristics Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics EN 16005:2012, Power operated pedestrian doorsets Safety in use Requirements and test methods EN 61000-6-2, El

47、ectromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments (IEC 61000-6-2) BS EN 16361:2013EN 16361:2013 (E) 7 EN 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial envi

48、ronments (IEC 61000-6-3) EN ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO 717-1) EN ISO 10077-1:2006, Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: General (ISO 10077-1:20

49、06) EN ISO 10077-2, Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames (ISO 10077-2) EN ISO 10140-2, Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurements of airborne sound insulation (ISO 10140-2) EN ISO 12543-2, Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass (ISO 12543-2) EN ISO 12567-