EN 16341-2012 en Selection of standards and standard-like documents for defence products and services - Order of preference《选择的标准和standard-like国防产品和服务文档 优先顺序排列》.pdf

《EN 16341-2012 en Selection of standards and standard-like documents for defence products and services - Order of preference《选择的标准和standard-like国防产品和服务文档 优先顺序排列》.pdf》由会员分享，可在线阅读，更多相关《EN 16341-2012 en Selection of standards and standard-like documents for defence products and services - Order of preference《选择的标准和standard-like国防产品和服务文档 优先顺序排列》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16341:2012Selection of standards andstandard-like documents fordefence products and services Order of preferenceBS EN 16341:2012 BRITISH STANDARDNational forewordThis Briti

2、sh Standard is the UK implementation of EN 16341:2012.The UK participation in its preparation was entrusted to TechnicalCommittee DEF/1, Defence standardization.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to inclu

3、de all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013.Published by BSI Standards Limited 2013.ISBN 978 0 580 71993 6 ICS 95.020 Compliance with a British Standard cannot confer immunity fromlegal obligations.This Britis

4、h Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedBS EN 16341:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16341 March 2012 ICS 95.020 English Version Selection of standards a

5、nd standard-like documents for defence products and services - Order of preference Slection de normes et de documents normatifs destins aux produits et services de la Dfense - Ordre de prfrence Auswahl von Normen und anderen normartigen Dokumenten fr wehrtechnische Produkte und Dienstleistungen - Ra

6、ngfolge This European Standard was approved by CEN on 11 February 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp

7、hical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

8、ty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, H

9、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Manag

10、ement Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16341:2012: EBS EN 16341:2012EN 16341:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms a

11、nd definitions .54 Order of preference .54.1 General 54.2 Edition .54.3 Preferences 54.4 Contract changes.65 Disclaimer .7BS EN 16341:2012EN 16341:2012 (E) 3 Foreword This document (EN 16341:2012) has been prepared by the CEN/CENELEC Stakeholder Forum for Defence Procurement Standardization. This Eu

12、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of t

13、he elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

14、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl

15、and, Turkey and the United Kingdom. BS EN 16341:2012EN 16341:2012 (E) 4 Introduction This document describes the order of preference when applying standards and standard-like documents for defence products and services and considers the selection requirements of the Directive 2009/81/EC. BS EN 16341

16、:2012EN 16341:2012 (E) 5 1 Scope This European Standard applies to the provision, development, use, improvement and disposal of defence products and services in accordance with Chapter II of Directive 2009/81/EC. It also applies to measures intended to maintain the operational readiness of products.

17、 This document supports project managers in the selection and use of applicable standards and standard-like documents. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, onl

18、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Directive 2009/81/EC of the European Parliament and of the Council of 13 July 2009 on the coordination of procedures for the award of certain works contracts, supply

19、 contracts and service contracts by contracting authorities or entities in the fields of defence and security, and amending Directives 2004/17/EC and 2004/18/EC ISO/IEC Guide 2:2004, Standardization and related activities General vocabulary 3 Terms and definitions For the purposes of this document,

20、the terms and definitions given in Directive 2009/81/EC and ISO/IEC Guide 2:2004 apply. 4 Order of preference 4.1 General The standards and standard-like documents applicable to contracts shall be identified by the Purchaser or agreed on proposal by contracting parties. Among them, the non-applicati

21、on of a standard requires the Purchasers written approval. 4.2 Edition For the execution of contractually agreed work the edition of the standard specified in the contract shall apply. If difficulties occur in the execution of a contract due to the fact that a new edition is issued during contract d

22、uration, it is at the discretion of the contracting parties to apply the new edition. 4.3 Preferences If, for the specification of the capability of a defence product or a service, standards or standard-like documents of different domains or origin are available and deemed suitable by the Purchasing

23、 Authority, they shall be selected and used in the following order of preference: a) Standards and other standard-like documents, which are referenced in laws, ordinances and statutory provisions; b) International Military Alliances Standards (e.g. NATO Allied Publications and associated Standardiza

24、tion Agreements (STANAG); NOTE For NATO nations this applies if the standards are ratified (without reservations) with the intention of implementation for e.g. achieving the required interoperability between forces. c) National civil standards, transposing European standards (e.g. BS EN, NF EN, DIN

25、EN,); BS EN 16341:2012EN 16341:2012 (E) 6 d) European Technical Approvals (ETA); NOTE Mainly in the construction sector. e) Common European Technical Specifications; f) National civil standards, transposing international standards (e.g. BS ISO,); g) other international civil standards; h) other tech

26、nical reference systems established by the recognized European standardization bodies. If for the present application no suitable standards or standard-like documents according to a) to h) are available, appropriate standards or standard like documents shall be chosen in accordance with the followin

27、g order of preference: i) other national civil standards and standard-like documents (e.g. BS); j) National Technical Approvals or Technical Specifications (e.g. DIN-SPEC); k) widely recognized civil technical specifications stemming from industry. If the necessary requirements cannot be met by the

28、application of the aforementioned standards or standard-like documents, appropriate defence standards or standard like documents shall be chosen among others from the following technical reference systems: l) National Defence Materiel Standards (e.g. UK Defence Standards, German VG); m) Mandatory na

29、tional regulations and directives relating to specific equipment (e.g. aircraft or naval ships); n) National Technical Specifications issued by governmental defence procurement authorities; o) Military standards of partner nations, such as MIL Standards (USA); p) Company standards may be chosen, in

30、cases where the requirements cannot be covered by the documents previously mentioned; where the application of company standards is envisaged, the Contractor shall ensure that these standards are made available to the Purchaser together with the related rights of use. Each reference in tendering doc

31、uments shall be followed by the expression “or equivalent“ as stated in Directive 2009/81/EC. EDSTAR shall be considered during the standards selection process as it contains recommended Best Practice Standards for the acquisition of defence materiel. NOTE EDSTAR is the former “European Handbook for

32、 Defence Procurement (EHDP)“. See under: www.eda.europa.eu/EDSTAR 4.4 Contract changes Issues may arise during the execution of a contract which necessitate a change in the list of standards and standard-like documents or make a change appear reasonable; such changes being driven by: a) new experien

33、ce gained during contract execution; b) standards lower in the selection order being referred to in laws, ordinances and statutory provisions; BS EN 16341:2012EN 16341:2012 (E) 7 c) standards lower in the selection order appearing to be more suitable from a technical point of view; d) the applicatio

34、n of standards lower in the selection order being more economical; e) other orders of preference being defined in bilateral or multilateral projects. Where the initiative to change the list of standards and standard-like documents is taken by the Contractor, the Purchasers prior consent shall be obt

35、ained; and the change shall be laid down in a contract amendment. 5 Disclaimer The editor of standards and standard-like documents makes no warranty that the subject of standardization is free of protective right or copyright claims; the standardization does not grant permission to exploit such righ

36、ts. This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BS

37、I is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are pe

38、riodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity w

39、hile using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an i

40、ndividual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from t

41、he BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implement

42、ation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are

43、kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standar

44、ds and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or ent

45、ity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieva

46、l system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: