EN 15997-2011 en All terrain vehicles (ATVs - Quads) - Safety requirements and test methods (Incorporating corrigendum October 2012)《全地形车辆(ATVs-四边形) 试验方法和安全性要求》.pdf

《EN 15997-2011 en All terrain vehicles (ATVs - Quads) - Safety requirements and test methods (Incorporating corrigendum October 2012)《全地形车辆(ATVs-四边形) 试验方法和安全性要求》.pdf》由会员分享，可在线阅读，更多相关《EN 15997-2011 en All terrain vehicles (ATVs - Quads) - Safety requirements and test methods (Incorporating corrigendum October 2012)《全地形车辆(ATVs-四边形) 试验方法和安全性要求》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15997:2011All terrain vehicles (ATVs Quads) Safety requirements and test methodsIncorporating corrigendum October 2012BS EN 15997:2011National forewordThis British Standard

2、 is the UK implementation of EN 15997:2011, incorporating corrigendum October 2012.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by CEN corrigendum October 2012 is indicated in the text by .The UK participation in its preparation was

3、 entrusted to Technical Committee AGE/6, Agricultural tractors and forestry machinery.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

4、ts correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 80871 5 ICS 43.140 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy an

5、d Strategy Committee on 30 April 2012.Amendments/corrigenda issued since publicationDate Text affected30 June 2013 Implementation of CEN corrigendum October 2012BRITISH STANDARDEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15997 November 2011 ICS 43.140 English Version All terrain vehicles (A

6、TVs - Quads) - Safety requirements and test methods Vhicules tout terrain (ATV - Quads) - Exigences de scurit et mthodes dessai Gelndegngige Fahrzeuge (ATV - Quads) - Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 15 October 2011. CEN members are b

7、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the

8、 CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centr

9、e has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form a

11、nd by any means reserved worldwide for CEN national Members. Ref. No. EN 15997:2011: EIncorporating corrigendum October 2012EN 15997:2011 (E) 2 Contents Page Foreword 5Introduction .61 Scope 72 Normative references 73 Terms and definitions .84 List of significant hazards . 125 Safety requirements an

12、d/or protective measures . 155.1 General . 155.2 Mechanical hazards 155.2.1 Throttle control . 155.2.2 Braking devices 155.2.3 Steering system 175.2.4 Moving parts 175.2.5 Sharp edges 185.2.6 Rider foot environment 195.2.7 Fuel and hydraulic systems . 205.2.8 Riders seat and handlebar 205.2.9 Passen

13、ger handholds 205.2.10 Mechanical suspension . 205.2.11 Drive train controls . 215.2.12 Neutral indicator . 215.2.13 Indication of reverse drive selection 215.2.14 Electric starter interlock . 215.2.15 Access systems to the riders station and maintenance points 225.2.16 Foot controls . 225.2.17 Ligh

14、ting equipment (headlamps, tail lamps and stop lamps) 225.2.18 Stability 225.2.19 Category Y and Category T ATV speed capability requirements 235.2.20 Engine stop switch . 245.2.21 Manual clutch control . 245.2.22 Unauthorized use 245.2.23 Flag pole bracket 245.3 Electrical hazards . 245.3.1 General

15、 . 245.3.2 Over-current protective devices 255.3.3 Batteries . 255.3.4 Protection against the neutralisation of the starter security . 255.4 Hot surfaces 255.4.1 General . 255.4.2 Temperature limits for touchable surfaces 265.5 Noise control . 275.5.1 Noise control at source by design 275.5.2 Noise

16、control by protective measures . 275.5.3 Noise reduction by information . 275.6 Vibration hazards 275.7 Material/substance hazards . 275.8 Controls and indicators . 285.9 Storage provisions . 285.10 Ergonomics . 285.11 Errors of fitting 28BS EN 15997:2011 3 6 Verification of the safety requirements

17、and/or protective measures 286.1 Verification methods . 286.2 Verification of final assembly . 307 Information for use 307.1 General . 307.2 Signs (pictograms), written warnings . 307.3 Accompanying documents (in particular the instruction handbook) 317.4 Marking . 34Annex A (informative) Examples o

18、f All Terrain Vehicles (ATVs - Quads) . 35Annex B (normative) Service brake performance . 37B.1 Measuring maximum speed . 37B.2 Measuring service brake performance 37Annex C (normative) Parking brake/Mechanism performance 39C.1 Test Conditions . 39C.2 Test Procedure 39Annex D (normative) Handlebar 4

19、0Annex E (normative) Rider foot environment 41E.1 Test probe 41E.2 Type 1 ATV Test procedure 41E.3 ATV Type 2 test procedure . 42Annex F (normative) Longitudinal stability 43F.1 Test conditions 43F.2 Test procedure . 43Annex G (normative) Hot surfaces 45G.1 Identification of contact zones . 45G.2 Te

20、mperature measurement procedure 50Annex H (normative) Noise test code . 52H.1 General . 52H.2 Operating and mounting conditions . 52H.3 Noise measurements 52H.4 Test environment . 53H.5 Determination of A-weighted emission sound pressure level at riders ear . 53H.6 Determining if further measurement

21、s are necessary 54H.7 Determining the A-weighted sound pressure levels over a surface enveloping the vehicle 54H.8 Determining the A-weighted sound power level from the A-weighted sound pressure levels over the measurement surface . 56H.9 Information to be recorded . 57H.10 Information to be reporte

22、d 58H.11 Declaration and verification of noise emission values . 58Annex I (informative) Vibration test code . 59I.1 Background 59I.2 Coupling the hand and body to the vibration source 60I.3 Positioning and operating the vehicle during the test 61I.4 Parameters to be measured . 61I.5 Determination o

23、f the vibration levels 61I.6 Information to be recorded . 61I.7 Information to be reported 62Annex J (informative) Pre-delivery form . 63J.1 General . 63J.2 Dealers declaration. 63J.3 Purchasers declaration 64J.4 ATV pre-delivery certificate 64Annex K (informative) Examples of warnings, pictograms a

24、nd combinations that may be used 66Annex L (normative) Evaluation sheet before letting a person use the ATV . 69BS EN 15997:2011 EN 15997:2011 (E)4 Annex M (informative) Instructions for tyres to be included in the instructions handbook 70M.1 General . 70M.2 Instructions on use . 70M.3 Tyre and whee

25、l maintenance . 70M.4 Tyre replacement 70M.5 Tyre ageing 70Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC . 71Bibliography . 72BS EN 15997:2011 EN 15997:2011 (E)5 Foreword This document (EN 15997:2011) has been prepared by

26、 Technical Committee CEN/TC 354 “Ride-on, motorized vehicles intended for the transportation of persons and goods and not intended for use on public roads - Safety requirements”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, eithe

27、r by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELE

28、C shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic

29、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. This document has been prepared under a mandate given t

30、o CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2006/42/EC. For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of this document. BS EN 15997:2011 EN 15997:2011 (E)6 Introduct

31、ion This document is a type C standard as stated in EN ISO 12100 (all parts). The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those w

32、hich are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 15997:2011 EN 15997:2011 (E)7 1 Scope This European S

33、tandard applies to “All Terrain Vehicles” or “ATVs” as defined in Clause 3 using liquid fuels (e.g. petrol, diesel). This European Standard does not deal with requirements relating to use on public roads 1). This European Standard is not dealing with: ATVs exclusively intended for competition 2); ag

34、ricultural and forestry tractors coming under the Directive 2003/37/EC; accessories for additional functions (towing hook and load carrying provisions remaining within the vertical projection onto the ground of the vehicle without these load carrying provisions are not considered as accessories); th

35、e additional hazards due to the use of the ATV on public roads; the additional hazards due to the use of remote control. This European Standard deals with all significant hazards, hazardous situations and events relevant to ATVs, when they are used as intended and under conditions of misuse which ar

36、e reasonably foreseeable by the manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as defined in 5.3 of EN ISO 12100-1:2003. This European Standard is not applicable to ATVs which are manufactured before the date of its publication as EN. NOT

37、E For the purpose of this document, any reference to the vehicle should be regarded as a reference as a machine. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referen

38、ces, the latest edition of the referenced document (including any amendments) applies. EN 614-1, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 953, Safety of machinery Guards General requirements for the design and construction of fixed and movable gua

39、rds CEN/TR 15172-1, Whole-body vibration Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery EN 61310-1, Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) 1) In general vehi

40、cles intended for use on public roads have to fulfil specific requirements and require official “type-approval”. 2) The main criterion to be applied to judge whether vehicles are to be considered as exclusively intended for competition is whether they are designed according to the technical specific

41、ations laid down by one of the officially recognised racing associations. BS EN 15997:2011 EN 15997:2011 (E)8 EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting p

42、lane (ISO 3744:2010) EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified

43、positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery

44、 Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13857:2008, Safety of machinery Safety distances to p

45、revent hazard zones being reached by upper and lower limbs (ISO 13857:2008) ISO 29802, All terrain (AT) tyres and rims Symbol marked pneumatic tyres on 5 degrees tapered rims Designation, dimension, marking and load ratings CR 1030-1, Hand-arm vibration Guidelines for vibration hazards reduction Par

46、t 1: Engineering methods by design of machinery 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following apply. 3.1 all-terrain vehicle (ATV) motorised vehicle, propelled by an internal combustion engine with liquid fuel, int

47、ended primarily to travel on unpaved surfaces on four wheels with low-pressure tyres, having a seat designed to be straddled by the rider and handlebars for steering, and subdivided into two types as designated by the manufacturer 3.1.1 ATV Type I ATV intended for use by a single rider and no passen

48、ger and further identified by four intended usage categories as follows: 3.1.1.1 ATV Type I category G (General Use Model) ATV Type I intended for recreational and/or utility use by a rider age 16 or older 3.1.1.2 ATV Type I category S (Sport Model) ATV Type I intended for recreational use by an experienced rider, age 16 or older 3.1.1.3 ATV Type I category Y (Youth Model) ATV Type I of appropria