EN 15960-2011 en Fertilizers - Extraction of total calcium total magnesium total sodium and total sulfur in the forms of sulfates《肥料 硫酸盐形式中的钙 镁 钠和硫总量的提取》.pdf

《EN 15960-2011 en Fertilizers - Extraction of total calcium total magnesium total sodium and total sulfur in the forms of sulfates《肥料 硫酸盐形式中的钙 镁 钠和硫总量的提取》.pdf》由会员分享，可在线阅读，更多相关《EN 15960-2011 en Fertilizers - Extraction of total calcium total magnesium total sodium and total sulfur in the forms of sulfates《肥料 硫酸盐形式中的钙 镁 钠和硫总量的提取》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15960:2011Fertilizers Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfatesBS EN 15960:2011 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of EN 15960:2011. It supersedes DD CEN/TS 15960:2009, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e C I I / 3 7 , F e r t i l i s e r s a n d r e l a t e d c h e m i c a l s .A list of or

3、ganizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 74444 0 ICS 65.080 Compliance with a British Stand

4、ard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 15960:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NOR

5、M EN 15960 November 2011 ICS 65.080 Supersedes CEN/TS 15960:2009English Version Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates Engrais - Extraction du calcium total, du magnsium total, du sodium total et du soufre total prsent sous

6、forme de sulfate Dngemittel - Extraktion von Gesamtcalcium, Gesamtmagnesium und Gesamtnatrium sowie von Gesamtschwefel in Form von Sulfat This European Standard was approved by CEN on 15 October 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

7、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists

8、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national stand

9、ards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and U

10、nited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15960:201

11、1: EBS EN 15960:2011EN 15960:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Principle 45 Sampling .46 Reagents .47 Apparatus .58 Procedure .58.1 Test portion 58.2 Extraction .59 Test report 5Bibliography 6BS EN 15960:2011EN 15960:2011 (E) 3 Foreword T

12、his document (EN 15960:2011) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

13、latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such

14、patent rights. This document supersedes CEN/TS 15960:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. The following has been added to the former edition of the European Standard: a) the CEN Technical Specification

15、has been adopted as a European Standard; b) editorial revision. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto

16、nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15960:2011EN 15960:2011 (E) 4 1 Scope This European Standard spe

17、cifies a method for the extraction of total calcium, total magnesium and total sodium and for the extraction of total sulfur present in the form of sulfates, so that the same extract may be used for the determination of each nutrient required. The method is applicable to fertilizers listed in Regula

18、tion (EC) 2003/2003, Annex I 2, for which a declaration of total calcium, total magnesium, total sodium, and total sulfur in the form of sulfates is provided for in this Regulation. 2 Normative references The following referenced documents are indispensable for the application of this document. For

19、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1482-2, Fertilizers and liming materials Sampling and sample preparation Part 2: Sample preparation EN 12944-1:1999, Fertilizers and liming m

20、aterials and soil improvers Vocabulary Part 1: General terms EN 12944-2:1999, Fertilizers and liming materials and soil improvers Vocabulary Part 2: Terms relating to fertilizers 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12944-1:1999 and EN 1294

21、4-2:1999 apply. 4 Principle Extraction of the magnesium, sodium and sulfur present in the form of sulfates in the fertilizer by boiling in diluted hydrochloric acid under the specified conditions. 5 Sampling Sampling is not part of the method specified in this document. A recommended sampling method

22、 is given in EN 1482-1. Sample preparation shall be carried out in accordance with EN 1482-2. Grinding of the laboratory sample is recommended for homogeneity reasons. 6 Reagents 6.1 Water, distilled or demineralized. 6.2 Diluted hydrochloric acid, mix one volume of hydrochloric acid, = 1,18 g/ml, w

23、ith one volume of water. BS EN 15960:2011EN 15960:2011 (E) 5 7 Apparatus 7.1 Standard laboratory equipment. 7.2 Electric hot plate, with adjustable temperature. 7.3 Beaker, capacity 600 ml. 7.4 Graduated flask, capacity 500 ml. 7.5 Dry filter. 8 Procedure 8.1 Test portion Weigh, to the nearest 1 mg,

24、 5 g of the laboratory sample and place it in the beaker (7.3). When the fertilizer contains more than 15 % of sulfur (S) i.e. 37,5 % SO3, and more than 18,8 % of calcium (Ca) i.e. 26,3 % CaO, carry out the extraction of calcium and sulfur using a test portion of 1 g, weighed to the nearest 1 mg. Pl

25、ace it in the beaker (7.3). 8.2 Extraction Add approximately 400 ml of water (6.1) to the test portion (8.1) and, taking care when the sample contains a significant quantity of carbonates, 50 ml of diluted hydrochloric acid (6.2) a small amount at a time. Bring to the boil and maintain for 30 min. A

26、llow to cool, stirring occasionally. Decant quantitatively into a graduated flask (7.4). Make up to volume with water (6.1), and mix. Pass through a filter (7.5) into a dry container, discarding the initial portion. The extract shall be completely transparent. Stopper the filtrate if it is not used

27、immediately. 9 Test report The test report shall contain at least the following information: a) all information necessary for the complete identification of the sample; b) test method used with reference to this document; c) test results obtained; d) date of sampling and sampling procedure (if known

28、); e) date when the analysis was finished; f) whether the requirement of the repeatability limit has been fulfilled; g) all operating details not specified in this document, or regarded as optional, together with details of any incidents occurred when performing the method, which might have influenc

29、ed the test result(s). BS EN 15960:2011EN 15960:2011 (E) 6 Bibliography 1 EN 1482-1, Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling 2 Regulation (EC) No 2003/2003 of the European Parliament and of the Council of 13 October 2003 relating to fertilisers, Official Jou

30、rnal L 304, 21.11.2003, p. 1-194, Annex I and Annex IV, Method 8.1 This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and a

31、t the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-d

32、ards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical

33、 com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996

34、 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20

35、 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national

36、, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Su

37、bscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online acc

38、ess to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted unde

39、r the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of impleme

40、nting the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: