EN 15839-2012 en Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal co.pdf

《EN 15839-2012 en Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal co.pdf》由会员分享，可在线阅读，更多相关《EN 15839-2012 en Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal co.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 15839:2012+A1:2015BS EN 15839:2012Railway applications Testingfor the acceptance of runningcharacteristics of railwayvehicles Freight wagons Testing of running safety underlongitudinal compressive forcesBS EN 15839:2012+A1:2015 BRITISH STANDARDNational forewordThis Bri

2、tish Standard is the UK implementation of EN 15839:2012+A1:2015. It supersedes BS EN 15839:2012, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example

3、, text altered by CEN amendment A1 is indicated by .Amendments/corrigenda issued since publicationDate Text affected30 November 2015 Implementation of CEN amendment A1:2015A list of organizations represented on this subcommittee can be obtained on request to its secretary. The British Standards Inst

4、itution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 87958 6BS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15839:2012.The UK committee draws users attention to the distinction betweennormative and informative elements, as defined

5、 in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the document is to be claimed and from which nodeviation is permitted.Informative: Information intended to assist the understanding or useof the document. Informat

6、ive annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to comply with these requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK

7、,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in these cases. For the values used in this standard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participatio

8、n in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.

9、 Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

10、of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15839:2012.The UK committee draws users attention to the distinction betweennor

11、mative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the document is to be claimed and from which nodeviation is permitted.Informative: Information intended to assist the un

12、derstanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to comply with these requirements to claim compliance withthe standard.When rounded value

13、s require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in these cases. For the values used in this standard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equi

14、valent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include

15、 all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British

16、Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15839:2012.The UK committee draws us

17、ers attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the document is to be claimed and from which nodeviation is permitted.Informa

18、tive: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to comply with these requirements to claim com

19、pliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in these cases. For the values used in this standard:4 km/h has an equ

20、ivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations represented on this committee can beobtained on request to its secretary.T

21、his publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Compliance with a British Standard cannot confer i

22、mmunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

23、 of EN 15839:2012.The UK committee draws users attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the document is to be claimed and

24、from which nodeviation is permitted.Informative: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to

25、comply with these requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in these cases. For the val

26、ues used in this standard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations represented on this committee c

27、an beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Complia

28、nce with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STNational forThis British S

29、tandard is the UK implementation of EN 15839:2012.The UK committee draws users attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with th

30、e document is to be claimed and from which nodeviation is permitted.Informative: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requi

31、rements, but there is noneed to comply with these requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avo

32、ided in these cases. For the values used in this standard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations

33、 represented on this committee can be.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Compliance

34、with a British Standard cannot confer immunity frlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedStandards Policy and Strategy Committee on 30 November 2012

35、.ext afThe UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway Applications, to Subcommittee RAE/1/-/8, Railway Appications Vehicle/track Interaction.BS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15839:2012.

36、The UK committee draws users attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the document is to be claimed and from which nodevia

37、tion is permitted.Informative: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to comply with these

38、requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in these cases. For the values used in this s

39、tandard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations represented on this committee can beobtained on r

40、equest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72895 2ICS 45.060.20Compliance with a British

41、 Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STANDARDNational forewordThis British Standard

42、 is the UK implementation of EN 15839:2012.The UK committee draws users attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria to be fulfilled ifcompliance with the docum

43、ent is to be claimed and from which nodeviation is permitted.Informative: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements

44、, but there is noneed to comply with these requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number. The use of absolute values for converted units shouldbe avoided in

45、 these cases. For the values used in this standard:4 km/h has an equivalent value of 3 mile/h8 km/h has an equivalent value of 5 mile/hThe UK participation in its preparation was entrusted to TechnicalCommittee RAE/1/-/8, Railway Applications - Vehicle/TrackInteraction.A list of organizations repres

46、ented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72

47、895 2ICS 45.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedBS EN 15839:2012 BRITISH STA

48、NDARDNational forewordThis British Standard is the UK implementation of EN 15839:2012.The UK committee draws users attention to the distinction betweennormative and informative elements, as defined in Clause 3 of theCEN/CENELEC Internal Regulations, Part 3.Normative: Requirements conveying criteria

49、to be fulfilled ifcompliance with the document is to be claimed and from which nodeviation is permitted.Informative: Information intended to assist the understanding or useof the document. Informative annexes do not contain requirements,except as optional requirements, and are not mandatory. Forexample, a test method may contain requirements, but there is noneed to comply with these requirements to claim compliance withthe standard.When rounded values require unit conversion for use in the UK,users are advised to use equivalent values rounded to the nearestwhole number