EN 15649-3-2009 en Floating leisure articles for use on and in the water - Part 3 Additional specific safety requirements and test methods for Class A devices (Incorporates Amendme.pdf

《EN 15649-3-2009 en Floating leisure articles for use on and in the water - Part 3 Additional specific safety requirements and test methods for Class A devices (Incorporates Amendme.pdf》由会员分享，可在线阅读，更多相关《EN 15649-3-2009 en Floating leisure articles for use on and in the water - Part 3 Additional specific safety requirements and test methods for Class A devices (Incorporates Amendme.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN15649-3:2009ICS 97.200.50; 97.220.40NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDFloating leisurearticles for use on andin the waterPart 3: Additional specific safetyrequirements and test methods forClass A devices+A1:2012National forewordThis British St

2、andard is the UK implementation of EN 15649-3:2009+A1:2012. It supersedes BS EN 15649-3:2009 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, te

3、xt altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee SW/136, Sports, playground and other recreational equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publicatio

4、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 15649-3:2009+A1:2012This British Standard was published under the authority of the Standa

5、rds Policy and Strategy Committee on 31 December 2009 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 30 April 2012 Implementation of CEN amendment A1:2012ISBN 978 0 580 75583 5EUROPEAN STANDARD NORME EUROPEN

6、NE EUROPISCHE NORM EN 15649-3:2009+A1 January 2012 ICS 97.220.40 Supersedes EN 15649-3:2009English Version Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices Articles de loisirs flottants utiliser sur ou dans l

7、eau - Partie 3: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe A Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 3: Zustzliche besondere sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klasse A This European Standard was a

8、pproved by CEN on 11 September 2009 and includes Amendment 1 approved by CEN on 29 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to

9、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat

10、ion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,

11、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHE

12、S KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15649-3:2009+A1:2012: EEN 15649-3:2009+A1:2012 (E) 2 Contents Page Foreword 3Introduction .51 Scope 72 N

13、ormative references 73 Terms and definitions .74 Safety requirements and test methods .84.1 General 84.2 Design, Sizing, admissible number of users and maximum load capacity .94.3 In water performance . 115 Consumer information . 185.2 Consumer information on the packaging (point of sale information

14、) . 185.3 Consumer information on the product (information related to safe use) . 185.4 Consumer information by instructions for use (separate written information) . 186 Test report . 197 Exclusions . 19Annex A (informative) Examples of typical products forming Class A 20Bibliography . 22BS EN 15649

15、-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 3 Foreword This document (EN 15649-3:2009+A1:2012) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the s

16、tatus of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subjec

17、t of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2011-11-29. This document supersedes EN 15649-3:2009. The start and finish of text introduced or altered by amendment is indicate

18、d in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard is one of a series consisting of seven standards dealing with floating leisure articles for use on and in the water. Compl

19、iance of a product to this standard requires that the requirements of the relevant specific part and additionally, the requirements of EN 15649-1 and EN 15649-2 shall be met. If a product includes multiple use related to several classes it has to meet the requirements of all these classes. BS EN 156

20、49-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 4 Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

21、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. BS EN 15649-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 5 Int

22、roduction ! “ BS EN 15649-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 6 Table 1 Introductory risk analysis Class !Typical products Place of usage Function; range of usage; target / age group Type of movement / propulsion Position of user regarding equipment and elevation above water Predictable misuse

23、 Partial risk related to waterenvironment Final risk 1.1 Protection aims; 1.2 Related standard / regulation A1 floating in-flatable is-lands; recreational raft; platform/ pontoon, etc sea shore, close to shore; lakes; smoothly running riv-ers; public / private pools; ponds relaxing, resting on the w

24、ater; sunbath-ing; basis for bath-ing and swimming / playing; device providing high level of floating stability; single and collective use; all age groups, swim-mers static use within limited area; little action; movement by push-ing through swim-ming strokes only; no mechanical means of propul-sion

25、 on or in (side walls) the device, laying, sitting, no direct body fit; grab handles might exist but resting does not depend on gripping / balancing; no dangerous height of fall dangerous distance from the bank / shore; use in cur-rents and/or dan-gerous offshore winds; use by non-swimmers; fall ove

26、r board; no diving platform! unnoticed drifting to open waters; falling asleep and conse-quently extreme sunburn, etc.; cap-sizing; skin irritation due to long duration of skin contact / dangerous sub-stances in contact with skin; climbing back?; hypothermia; cold shock D R O W N I N G floating stab

27、ility; minimum buoyancy; residual buoyancy; space, safety han-dles/ lines; anchor-age; warning notes, labelling, swimmers only, age restriction according to EN ISO 6185-1, EN ISO 6185-2 and EN ISO 6185-3 A2 Large buoyant structures sea shore / close to shore, lakes, public / pri-vate pools; ponds ac

28、tion, playing in the water; balancing children; collective and single use; all age groups, swimmers drifting; propulsion only by swimming strokes or third party on the device; loose fit via handles; no dangerous height use by non-swimmers; use In current, canal, lack of supervision drifting away in

29、open waters due to wind and/or current; devices provokes use in deep; used by non-swimmers; falling into deep water labelling, residual buoyancy, grab han-dles, supervision; warnings 1/2 air mattress for use in water; floatable pool loungers; floating seating structures; giant rings / tubes“ sea sho

30、re close to the shore; lakes, public / pri-vate pools; ponds sea resting on the water; observation of under water environment; play; mainly single use; floating stabil-ity depends on de-sign; all age groups, swimmers normally no me-chanical means of propulsion but pos-sible; drifting or propul-sion

31、by swimming strokes; seats might be equipped with ped-als (wheel propul-sion) On/in the device; device is clung on; device is held; mainly a near hori-zontal posture sit-ting; no relevant eleva-tion above water level see above see above See A1/A2 no rule is known to provide technical substance BS EN

32、 15649-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 7 1 Scope This European Standard is applicable for CLASS A classified floating leisure articles for use on and in water according to EN 15649-1 regardless whether the buoyancy is achieved by inflation or inherent buoyant mate-rial. This document (EN 1

33、5649-3) is applicable with EN 15649-1 and EN 15649-2. NOTE 1 Typical products forming Class A: “Floating Islands“ in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstruc-ture; large floats/rafts in various forms from round to square; large floating tubes, giant

34、 tubes (inflatable or inherently buoyant); floating arm chairs, seats and sun beds; air mattresses for use on the water; !deleted text“ recreational rafts / floating platforms / pontoons. NOTE 2 Typical places for application: pools; protected areas of lakes, ponds; protected area sea shore (no offs

35、hore winds, no currents). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

36、 !EN 15649-1:2009+A1:2012“, Floating leisure articles for use on and in the water Part 1: Classification, materials, general requirements and test methods EN 15649-2, Floating leisure articles for use on and in the water Part 2: Consumer information 3 Terms and definitions For the purposes of this d

37、ocument, the terms and definitions given in !EN 15649-1:2009+A1:2012“ and the following apply. 3.1 residual buoyancy provision of remaining buoyancy in case of a defect of any buoyancy chamber BS EN 15649-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 8 3.21 device providing static floating stability pro

38、duct so designed that the user needs not to care about floating stability by his own skills NOTE One or several users may be safely on or in the device even if the weight is not evenly distributed. 3.31device to be balanced by the user upright floating of device depends on users skill and sense to b

39、alance it 3.4 escape easy and complete separation between the user and the device in case of capsizing of the device or system without hindrance through any part or feature of the floating device 3.5 available area area on or inside a floating article which can be used unrestrictedly for user accomm

40、odation when taking the intended posture(s) 3.6 multiple use product any product intended to be used for more than one purpose (jumping, resting, climbing, etc.) 3.7 inherent buoyant material non-crosslinked (closed-cell) foam or other materials enclosed in (a) sealed compartment(s) in the hull whic

41、h have a specific weight less than fresh water NOTE Inflatables made from inherent buoyant material are considered a buoyant structure (hull) achieving all or parts of its intended shape and buoyancy resulting from soft foam, hard foam or sealed chambers filled with air, gas or granules. 4 Safety re

42、quirements and test methods 4.1 General Construction of a floating leisure article shall be such that it corresponds in terms of design, dimensions, safety, strength and durability for its intended use. The requirements set out in this standard were chosen to ensure compliance with these considerati

43、ons. If inflatable floating leisure articles shall provide buoyancy in several components then requirements apply to all components. Floating leisure articles shall provide residual buoyancy if one air chamber fails. This residual buoyancy shall maintain the safety of the device even if its function

44、 is lost. The following safety requirements are therefore related to: design; sizing; materials; strength; performance; 1 In accordance with intended use. BS EN 15649-3:2009+A1:2012EN 15649-3:2009+A1:2012 (E) 9 information. In individual cases, due to the unpredictability, valency and indeterminabil

45、ity of existing and future concrete products, a corresponding choice shall be made by the test house. !Design and appearance of floating leisure articles shall not change the intended primary function of these floating leisure articles nor introduce a toy play value.“ 4.2 Design, sizing, admissible

46、number of users and maximum load capacity 4.2.1 General Devices shall be marked according to their size and / or number of permitted users and maximum load capac-ity. 4.2.2 Sizing 4.2.2.1 Requirements If a specific size/body weight correlation between user and device is relevant, the marking shall b

47、e in accor-dance with the range of body weights. The size/body weights of the user shall be indicated on the product by completing the relevant boxes of the appropriate safety information symbol “Users body weight range“ as specified in EN 15649-2. 4.2.2.2 Test method Check for correct marking and c

48、ompletion. 4.2.3 A1-products, space per person and admissible number of users 4.2.3.1 Requirements A1-products shall be labelled with regard to the intended posture lying/sitting of the user(s) and the maxi-mum permissible number of users. The minimum space for a user in lying posture shall correspo

49、nd to a flexi-ble template (adult/child) the dimensions of which are specified in !EN 15649-1:2009+A1:2012“, A.1.1. The minimum space for a sitting user shall correspond to the template (adult/child) as specified in !EN 15649-1:2009+A1:2012“, A.1.2. In cases of combined use (sitting and lying), the template for a lying person shall be applied to determine the available area. Templates may exceed the outer circumference of the device to a total amount of 30 %. This amoun