EN 15600-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - P.pdf

《EN 15600-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - P.pdf》由会员分享，可在线阅读，更多相关《EN 15600-2-2010 en Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - P.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15600-2:2010Thermal insulation productsfor building equipment andindustrial installations In-situ thermal insulation formedfrom exfoliated vermiculite(EV) productsPart 2: S

2、pecification for the installedproductsBS EN 15600-2:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15600-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented

3、 on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 68710 5ICS 91.100.60Compliance with a British Standard cannot confer immunity

4、 fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2010.Amendments issued since publicationDate Text affectedBS EN 15600-2:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15600-2 July 2010 ICS 91.100.60 E

5、nglish Version Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products Produits isolants thermiques pour lisolation du btiment et les installations

6、 industrielles - Isolation thermique forme en place base de granulats lgers de vermiculite exfolie (EV) - Partie 2: Spcification de produits mis en place Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergestellte Wrmedmm

7、ung mit Produkten aus expandiertem Vermiculit (EV) - Teil 2: Spezifikation fr die eingebauten Produkte This European Standard was approved by CEN on 16 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

8、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, G

9、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyp

10、rus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

11、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15600-2:2010: EBS EN 15600-2:2010EN 15600-2:2010 (E) 2 Contents

12、Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .43.1 Definitions 43.2 Symbols and abbreviations 53.2.1 Symbols used in this part of the standard 53.2.2 Abbreviations used in this part of the standard .54 Requirements .54.1 General 54.2 Thermal resistance 54.3 Installed decla

13、red insulation thickness .54.4 Cavity fill .65 In-situ measurements 65.1 Installed declared insulation thickness .65.2 Width of cavities 65.3 Cavity fill .66 Installers declaration 6Bibliography 7BS EN 15600-2:2010EN 15600-2:2010 (E) 3 Foreword This document (EN 15600-2:2010) has been prepared by Te

14、chnical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting nati

15、onal standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has bee

16、n prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard consists of two parts which form a package. The first part, which is the harmonised part satisfying the mandate,

17、the CPD and is the basis for the CE marking, covers the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Attention is drawn to the need to take into account any complementary member state rules (e.g. ins

18、tallation rules) which together with this European Standard ensures the fitness for purpose of the installed product. This European Standard is one of a series for polyurethane/polyisocyanurate, expanded perlite and exfoliated vermiculite in-situ formed insulation products used in building equipment

19、 and industrial installations, but this standard may be used in other areas where appropriate. EN 14317-1 covers the use of expanded vermiculite in buildings. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emiss

20、ions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin

21、land, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15600-2:2010EN 15600-2:2010 (E) 4 1 Scope This European Standard specifi

22、es the requirement for exfoliated vermiculite products, which are used for in-situ thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately 40 C to + 1050 C. This European Standard specifies the requirements for the four types

23、of exfoliated vermiculite products Vermiculite Aggregate (EVA), Coated Vermiculite (EVC), Hydrophobic Vermiculite (EVH) and Premixed Vermiculite (EVM), containing less than 1 % by mass organic material as determined by Annex C in EN 15600-1:2010. This European Standard is a specification for the ins

24、talled products. This European Standard also specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a

25、particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with exfoliated vermiculite. The products covered by this European Standard are not inten

26、ded to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the installation in these respects when installed for their primary insulation intended use. 2 Normative references The following referenced documents are indispensabl

27、e for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 823:1994, Thermal insulating products for building applications Determination of thickness EN 156

28、00-1, Thermal insulation products for building equipment and industrial installations In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 1: Specification for bonded and loose-fill products before installation 3 Terms and definitions For the purposes of this document, th

29、e following terms and definitions apply. 3.1 Definitions 3.1.1 exfoliated vermiculite insulation material that results from expanding or exfoliating a natural micaceous mineral by heating EN ISO 9229 BS EN 15600-2:2010EN 15600-2:2010 (E) 5 3.1.2 loose fill insulation in-situ insulation formed by pou

30、ring the granular material into the void or cavity, without the use of a bonding material 3.1.3 bonded insulation in-situ insulation formed by bonding the exfoliated vermiculite to itself, or to itself and a surface 3.1.4 specifier person responsible for the amount and thickness of the insulation an

31、d the type of product to be used in a particular installation 3.1.5 installer person, company or organization which is responsible for the process of installing the insulation product 3.2 Symbols and abbreviations 3.2.1 Symbols used in this part of the standard d is the required thickness of the pro

32、duct m Dis the declared thermal conductivity W/(mK) Rsis the specified thermal resistance m2K/W 3.2.2 Abbreviations used in this part of the standard EV is exfoliated vermiculite as defined in 3.1.1. 4 Requirements 4.1 General The installer shall use an insulation product that complies with EN 15600

33、-1. The installer shall inspect the proposed installation, in order to determine whether it is suitable for application of the product. 4.2 Thermal resistance The required thermal resistance is obtained using the specified thickness of exfoliated vermiculite. The thickness shall be calculated by the

34、 specifier before installation starts, according to the formula d= RsD. The required thickness shall be compared with the design specification to confirm the suitability of this product. 4.3 Installed declared insulation thickness The mean value of the installed declared thickness shall not be less

35、than the thickness calculated in accordance with 4.2. No individual value shall be less than 80 % of the specified value. BS EN 15600-2:2010EN 15600-2:2010 (E) 6 4.4 Cavity fill The cavity shall be filled as specified by the specifier. 5 In-situ measurements 5.1 Installed declared insulation thickne

36、ss The installed declared insulation thickness of the insulation layer shall be measured by the installer. The method of verification will vary depending on the application. Verification shall include reference to guides or level marks placed before installation and direct measurement after installa

37、tion using a calibrated depth gauge. At least five insulation thickness measurements in different places shall be made for each 100 m2insulation area. In case of dispute, the installed insulation thickness shall be measured in accordance with EN 823:1994, Annex A, pin and plate method. 5.2 Width of

38、cavities The width of a cavity shall be determined by reference to design drawings or use of a suitable test. This determination will normally be carried out by the specifier, before installation starts. 5.3 Cavity fill For insulation applied in a cavity, the installer shall check to ensure that the

39、 cavity is filled as specified. 6 Installers declaration The installer (in conjunction with the specifier) shall declare to the customer that the work has been carried out in accordance with the requirements of this standard using an insulation product that complies with EN 15600-1. The installer sh

40、all state at least the following information: trade name and designation code of the installed product; declared thermal resistance; required thermal resistance; required thickness; installed declared thickness; volume of insulation material used; date of installation. The installer shall also decla

41、re that the work has been carried out according to the specified procedure. BS EN 15600-2:2010EN 15600-2:2010 (E) 7 Bibliography EN 14317-1, Thermal insulation products for buildings In-situ thermal insulation formed from exfoliated vermiculite (EV) products Part 1: Specification for bonded and loos

42、e-fill products before installation EN ISO 9229, Thermal insulation Vocabulary (ISO 9229:2007) This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and s

43、ervices. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards

44、are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this

45、 British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically

46、 receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publica

47、tionscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on

48、standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. T

49、el: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: mem