EN 15269-5-2014 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf

《EN 15269-5-2014 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf》由会员分享，可在线阅读，更多相关《EN 15269-5-2014 en Extended application of test results for fire resistance and or smoke control for door shutter and openable window assemblies including their elements of buildin.pdf（134页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 15269-5:2014Extended application of test r e s u l t s f o r f i r e r e s i s t a n c e a n d / or smoke control for door, shutter and openable window assemblies, including their elements of building hardwarePart 5: Fire resistance of hinged and pivoted metal framed g

2、lazed doorsets and openable windowsBS EN 15269-5:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15269-5:2014. The UK participation in its preparation was entrusted to TechnicalCommittee FSH/22/-/5, Fire resistance tests for doors.A list of organizations re

3、presented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0

4、 580 77203 0ICS 13.220.50; 91.060.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2014.Amendments/corrigenda issued since publicationDate T e x t a f f

5、 e c t e dBS EN 15269-5:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15269-5 June 2014 ICS 13.220.50; 91.060.50 English Version Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of buil

6、ding hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows Application tendue des rsultats dessais en matire de rsistance au feu et/ou dtanchit la fume des blocs-portes, blocs-fermetures et ouvrants de fentre, y compris leurs lments de quincailler

7、ie intgrs - Partie 5: Rsistance au feu des blocs-portes vitrs battants et pivotants, ossature mtallique, et des fentres vitres ossature mtallique Erweiterter Anwendungsbereich von Prfergebnissen zur Feuerwiderstandsfhigkeit und/oder Rauchdichtigkeit von Tren, Toren und Fenstern einschlielich ihrer B

8、aubeschlge - Teil 5: Feuerwiderstandsfhigkeit von verglasten Drehflgeltren und zu ffnenden Fenstern mit Metall(rohr)rahmen This European Standard was approved by CEN on 17 April 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving

9、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three officia

10、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Au

11、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe

12、den, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for C

13、EN national Members. Ref. No. EN 15269-5:2014 EBS EN 15269-5:2014EN 15269-5:2014 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Determination of the field of extended application 6 4.1 General 6 4.2 How to use extended application rules

14、 in Annex A .6 4.3 Procedure for maximum field of extended application .7 4.4 Analysis of resistance to fire test results .8 5 Extended application report .8 6 Classification report 8 Annex A (normative) Construction parameter variations .9 Annex B (normative) Arrangements for doorsets incorporating

15、 side and / or over panels . 121 Annex C (normative) Relationship showing the relevant Parts of EN 15269 that which should be used depending upon the type of doorset . 125 Bibliography . 130 BS EN 15269-5:2014EN 15269-5:2014 (E) 3 Foreword This document (EN 15269-5:2014 has been prepared by Technica

16、l Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014 and conflicting national standards shall b

17、e withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a ma

18、ndate given to CEN by the European Commission and the European Free Trade Association, and supports basic work requirements of Regulation (EU) 305/2011. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro

19、pean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

20、venia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15269-5:2014EN 15269-5:2014 (E) 4 Introduction This document is one of a series of standards listed below and intended to be used for the purpose of producing an extended application report based on the evaluation of one or more

21、 fire resistance and/or smoke control tests. These standards may also be used to identify the best selection of test specimens required to cover a wide range of product variations. EN 15269 ,Extended application of test results for fire resistance and/or smoke control for door, shutter and openable

22、window assemblies including their elements of building hardware, currently consists of: Part 1: General requirements; Part 2: Fire resistance of hinged and pivoted steel doorsets; Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows; Part 4: Fire resistanc

23、e of hinged and pivoted glass doorsets (in preparation); Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows; Part 6: Fire resistance of sliding timber doorsets; Part 7: Fire resistance of sliding steel doorsets; Part 8: Fire resistance of horizontally fol

24、ding timber doorsets (in preparation); Part 9: Fire resistance of horizontally folding steel doorsets (in preparation); Part 10: Fire resistance of steel rolling shutter assemblies; Part 11: Fire resistance of operable fabric curtains; Part 20: Smoke control for hinged and pivoted steel, timber and

25、metal framed glazed doorsets. BS EN 15269-5:2014EN 15269-5:2014 (E) 5 1 Scope This European Standard covers hinged and pivoted steel (any kind) and aluminium based framed, glazed doorsets or openable windows. This European Standard prescribes the methodology for extending the application of test res

26、ults obtained from resistance to fire test(s) conducted in accordance with EN 1634-1. Subject to the completion of the appropriate test or tests selected from those identified in Clause 4 the extended application may cover all or some of the following examples: integrity (E), integrity/radiation (EW

27、) or integrity/insulation (EI1or EI2) classifications; doorsets and openable windows; door / window leaf (leaves); glazing and non-glazed panels in doorset and openable window; items of building hardware; decorative finishes; intumescent, smoke, draught or acoustic seals; alternative supporting cons

28、truction(s). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

29、ing any amendments) applies. EN 1363-1, Fire resistance tests - Part 1: General Requirements EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and opena

30、ble windows EN 1634-2, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware EN 13501-2:2007+A1:2009, Fire classification of construction products an

31、d building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 15269-1, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware

32、 - Part 1: General requirements EN ISO 13943, Fire safety - Vocabulary (ISO 13943) BS EN 15269-5:2014EN 15269-5:2014 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1363-1, EN ISO 13943, EN 1634-1, EN 1634-2 and EN 15269-1 together with the foll

33、owing apply. 3.1 full scale test test of a full scale doorset in accordance with EN 1634-1 3.2 small scale test test on elements of building hardware in accordance with EN 1634-2 and where the decision process given in EN 1634-2 permits its use 3.3 effective rebate depth-2 dimension of the door leaf

34、 thickness of overlapping adjacent edges of door leaf relative to the door frame, transom or side panel or flush overpanel Note 1 to entry: At the meeting edges and for rebated leaves the dimension is the depth of the largest rebate. See Figure 1. Note 2 to entry: The effective rebate depth-2 is dif

35、ferent from the effective rebate depth definition given on other standards of the series EN 15269. 3.4 opening outwards means opening the doorleaf away from the fireside 4 Determination of the field of extended application 4.1 General 4.1.1 Before there can be any consideration for extended applicat

36、ion the doorset shall have been tested and classified in accordance with EN 1634-1 and EN 13501-2 respectively in order to establish a classification for the doorset. 4.1.2 A review of the construction parameters can indicate that one or more characteristics may be improved by a particular parameter

37、 variation. All evaluations shall be made on the basis of retaining the classifications obtainable from testing to EN 1634-1, including those lower than the test duration. However, this shall never lead to an increased classification for any specific parameter beyond that achieved by one resistance

38、to fire test unless specifically identified in the relevant Construction Parameter Variation tables. 4.1.3 If, by following the ensuing procedure, any part of the classification cannot be achieved by extended application rules that part of classification shall be omitted from the subsequent extended

39、 application report and classification report. 4.2 How to use extended application rules in Annex A 4.2.1 Identify the variations from the original resistance to fire test specimen(s) which are required to be covered by an extended application report. 4.2.2 Locate the variations in the appropriate p

40、arameter variation by reference to columns (1) and (2) of Table A.1. BS EN 15269-5:2014EN 15269-5:2014 (E) 7 4.2.3 Review the type of classification to be retained from column (3) and establish from the contents of column (4) whether any extended application is available beyond the direct applicatio

41、n rules in EN 1634-1 without the need for further testing. 4.2.4 Where this is deemed to be possible this can be recorded in the extended application report together with any appropriate restrictions and the stated rules from column (4) of Table A.1. 4.2.5 Where the variations required can only be a

42、chieved from additional testing, the additional resistance to fire test can be made on a similar specimen type i.e. a doorset of the same or more onerous configuration where the leaf construction is fundamentally the same as tested. Alternatively, column (5) identifies an option for alternative test

43、ing and relevant resistance to fire test parameters. 4.3 Procedure for maximum field of extended application 4.3.1 It is possible to provide an extended field of application from a single resistance to fire test. However, where a manufacturer intends to produce a range of doors incorporating single

44、doors and also double doors, with or without side, transom or flush over panels, with or without glazing, with or without louvres or ventilation grilles, with alternative elements of building hardware, etc., it is recommended that careful consideration is given to the complete range of doorset desig

45、ns and options in order to minimise the testing required before testing commences. 4.3.2 Establish all the parameter variations which are required to be part of the product range. 4.3.3 Determine which are the most important specification requirements and incorporate as many as possible into the spe

46、cimen(s) for the first resistance to fire tests in the series. 4.3.4 Conduct the first resistance to fire test or a series of tests and then establish which of the original desired parameter variations have not been covered by the resistance to fire tests, including direct application possibilities.

47、 4.3.5 Identify these parameter variations in Annex A and establish if any extended application is possible without further testing. 4.3.6 Record this for the extended application report together with any restrictions and rules given in column (5) in Table A.1. 4.3.7 Evaluate which, if any, of the d

48、esired parameter variations have not been covered by the field of direct application or the initial field of extended application derived from 4.3.5. 4.3.8 Determine if the product range is to include only single leaf doorsets or if the range is to also include double leaf configurations. Where only

49、 single doorsets are to be part of the product range then the outstanding construction parameter variations shall only be incorporated into specimens for the single leaf doorset. Where single leaf and double leaf doorsets are to be included in the product range, the outstanding construction parameter variations for the extended application of single leaf doorsets may be incorporated into either repeated single leaf doorset resistance to fire tests or in the weakest option, as defined in column 5 of Table A.1