EN 14998-2005 en Derivatives from coal pyrolysis - Coal tar based oils fluxings oils - Specifications and test methods《煤热解中的诱导生成物 煤焦油 稀释油 规范和试验方法》.pdf

《EN 14998-2005 en Derivatives from coal pyrolysis - Coal tar based oils fluxings oils - Specifications and test methods《煤热解中的诱导生成物 煤焦油 稀释油 规范和试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 14998-2005 en Derivatives from coal pyrolysis - Coal tar based oils fluxings oils - Specifications and test methods《煤热解中的诱导生成物 煤焦油 稀释油 规范和试验方法》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14998:2005 Derivatives from coal pyrolysis Coal tar based oils: fluxings oils Specifications and test methods The European Standard EN 14998:2005 has the status of a British Standard ICS 75.160.20 BS EN 14998:2005 This British Standard was published under the authority of the

2、Standards Policy and Strategy Committee on 21 March 2005 BSI 21 March 2005 ISBN 0 580 45679 X National foreword This British Standard is the official English language version of EN 14998:2005. The UK participation in its preparation was entrusted to Technical Committee CII/56, Derivatives from coal

3、pyrolysis, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue

4、under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct

5、application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informe

6、d; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document w

7、as last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14998 January2005 ICS75.160.20 Englishversion DerivativesfromcoalpyrolysisCoaltarbasedoils:fluxingsoils Specificationsandtestmethods ProduitsdrivsdelapyrolyseducharbonHuilesde g

8、oudrondehouille:fuidifiantsSpcificationsetmthodes dessai DerivatederKohlenpyrolyseSteinkohlenteerl:Fluxle AnforderungenundPrfverfahren ThisEuropeanStandardwasapprovedbyCENon9December2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an

9、 Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagema

10、debytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,L

11、atvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitation

12、inanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14998:2005:EEN 14998:2005 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Sampling.4 5 Specifications and test methods5 Annex A (informative) Warning to use 6 EN 14998:2005 (E) 3 For

13、eword This document (EN 14998:2005) has been prepared by Technical Committee CEN/TC 317, “Derivatives from coal pyrolysis“, the secretariat of which is held by IBN. This document is based on NF M 15-003. This European Standard shall be given the status of a national standard, either by publication o

14、f an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

15、 Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14998:2005 (E)

16、 4 1 Scope This document gives specifications and defines test methods for coal tar fluxing oils. Annex specifies this warning for use for industrial purposes. The main purposes of these oils are to reduce the viscosity of bituminous (carbonaceous) binders used for road construction. They may be use

17、d in conjunction with petrochemical feedstocks. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

18、 amendments) applies. EN 1014-1, Wood preservatives - Creosote and creosoted timber-Methods of sampling and analysis Part 1: Procedure for sampling creosote EN 1014-3, Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of benzoapyrene conten

19、t of creosote EN 12303:2000, Coal tar based oils - Terminology EN 12846, Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer EN 13847:2001, Coal tar and pitch based binders and related products - Terminology and classification EN 13991, Derivati

20、ves from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods EN ISO 2719, Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) EN ISO 3405, Petroleum products. Determination of distillation characteristics at atmospheric pressure (ISO 3405:200

21、0) EN ISO 3675, Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) ISO 760, Determination of water - Karl Fischer method (General method) 3 Terms and definitions For the purposes of this document, the terms and definitions given in

22、 EN 12303:2000 and EN 13847:2001 apply. 4 Sampling Samples for the assessment of the characteristics listed in Table 1 shall be taken in accordance with EN 1014-1. EN 14998:2005 (E) 5 5 Specifications and test methods Table 1 Specifications and test methods for fluxing oils grade A, B, C and D Param

23、eters Grade A light fluxing oils Grade B Medium fluxing oils Grade C Heavy fluxing oils Grade D Tests method Distillation range (C) 0 - 185 185 - 270 270 - 305 305 - 350 30 % 15 10 1,000 1,000 1,000 930 ISO 3675 Water content (% m/m) 61 61 101 61 EN ISO 2719 Viscosity STV 2 mm at 25C at 40C 4 mm at

24、25C 16 s 15 s 18 s 16 s 30 s. EN 12846 * As an alternative, the ISO 3733 may be used Grade A is intended for the preparation of storable cold mix binders and slurry sealings. Grade B and Grade C are devoted to the preparation of binders for surface dressing, respectively in cold and warm weather con

25、ditions. Grade D is issued from low temperature coal tar distillation and is intended for the preparation of binders for precoated chippings. EN 14998:2005 (E) 6 Annex A (informative) Warning for use 1)A.1 Composition - Data on components - Chemical characterization: - CAS. N Designation: not applic

26、able - Identification number (s): - EINECS Number: not applicable. - EU Number: not applicable. - Chemical characterization: - Description: Complex mixture of polynuclear aromatic and heterocyclic hydrocarbons. - Dangerous components: Void. A.2 First aid measures - General information: instantly rem

27、ove any clothing spoiled by the product. - After inhalation: Supply fresh air; consult doctor in case of symptoms. - After skin contact: Instantly wash with water and soap and rinse thoroughly. - A.2.4 After eye contact: Rinse opened eye for several minutes under running water. - After swallowing: I

28、n case of persistent symptoms consult doctor. A.3 Handling and storage - Handling. - Information for safe handling: No special measures required; precautions against electrostatic charging. - Information about protection against explosions and fires: No special measures required. - Storage - Require

29、ments to be met by storerooms and containers: No special requirements. - Information about storage in one common storage facility: Keep container tightly sealed. - Further information about storage conditions: None. A.4 Disposal considerations - Product: - European waste catalogue: The waste code cl

30、assification is to be carried out according to the European Waste Catalogue (EWC) specifically for each branch of industry and each type of process. - Uncleaned packagings - Recommendation: Disposal should be made according to official regulations. - Recommended cleaning agent: Water, if necessary w

31、ith cleaning agent. 1) The latest edition of the publication of the Material Safety Data Sheet of the product applies EN 14998:2005 (E) 7 Bibliography 1 ISO 3733, Petroleum products and bituminous materials - Determination of water - Distillation method BS EN 14998:2005 BSI 389 Chiswick High Road Lo

32、ndon W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or

33、revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would info

34、rm the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest edi

35、tions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response

36、to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its

37、 Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI ar

38、e kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online acces

39、s to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international

40、standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does no

41、t preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.