EN 14988-2-2006 en Children-s high chairs - Part 2 Test methods (Incorporates Amendment A1 2012)《儿童的高脚椅子 第2部分 测试方法-1994》.pdf

《EN 14988-2-2006 en Children-s high chairs - Part 2 Test methods (Incorporates Amendment A1 2012)《儿童的高脚椅子 第2部分 测试方法-1994》.pdf》由会员分享，可在线阅读，更多相关《EN 14988-2-2006 en Children-s high chairs - Part 2 Test methods (Incorporates Amendment A1 2012)《儿童的高脚椅子 第2部分 测试方法-1994》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN14988-2:2006Childrens high chairs Part 2: Test methodsThe European Standard EN 14988-2:2006 has the status of aBritishStandardICS 97.140; 97.190 BS EN +A1:2012BS EN 14988-2:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee

2、 on 31 July 2006 BSI 2006ISBN 0 580 48815 2National forewordThis British Standard is the official English languageversion ofEN 14988-2:2006. It supersedes DD ENV 1178-2:1995 which is withdrawn. Together withBS EN 14988-1:2006 it supersedes BS 5799:1986 which iswithdrawn.The UK participation in its p

3、reparation was entrusted to Technical Committee CW/41, Child use and care articles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.It should be noted that the UK voted against the publication of this standard. Reason

4、s for objection include the test method for slippage of adjusters on the restraint system has been omitted and the UK consider that the test methods as drafted may notbe reproducible and/or repeatable.Cross-referencesThe British Standards which implement international or Europeanpublications referre

5、d to in this document may be found in the BSI Catalogueunder the section entitled “International Standards Correspondence Index”, orby using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisionso

6、f a contract. Users are responsible for its correct application. Compliance with a British Standard doesnot of itself confer immunity from legal obligations.aid enquirers to understand the text;present to the responsible international/European committee anyenquiries on the interpretation, or proposa

7、ls for change, and keep UKinterests informed;monitor related international and European developments andpromulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a backcover.The BSI copyright notice displayed in this

8、document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsBS EN 14988-2:2006+A1:2012ISBN 978 0 580 73053 5Amendments/corrigenda issued since publicationDate Comments30 November 2012 Implementation of CEN amendment A1:2012This British Standard was p

9、ublished under the authority of the Standards Policy and Strategy Committee on 31 July 2006 The British Standards Institution 2012. Published by BSI Standards Limited 2012National forewordThis British Standard is the UK implementation of EN 14988-2:2006+A1:2012. It supersedes BS EN 14988-2:2006, whi

10、ch is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entr

11、usted by Technical Committee CW/1, Safety of child use and child care products, to Subcommittee CW/1/5, Nursery furniture.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Compliance with a British Standard cannot confer immunity from legal obligati

12、ons.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14988-2:2006+A1 August 2012 ICS 97.190; 97.140 Supersedes EN 14988-2:2006English Version Childrens high chairs - Part 2: Test methods Chaises hautes pour enfants - Partie 2: Mthodes dessai Kinderhochsthle - Teil 2: Prfverfahren This European S

13、tandard was approved by CEN on 6 February 2006 and includes Amendment 1 approved by CEN on 23 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration

14、. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by t

15、ranslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

16、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZA

17、TION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14988-2:2006+A1:2012: EEN 14988-2:2006+A1:2012 (E) 2 Conte

18、nts Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 General test conditions .74.1 Preliminary preparation 74.2 Determination of the junction line74.3 Test sequence 84.4 Tolerances 85 Test equipment 95.1 General 95.2 Test dummy 95.3 Impact hammer . 105.4 Loa

19、ding pad . 115.5 Small loading pad . 115.6 Stops 115.7 Floor surface . 115.8 Beams 115.8.1 Beam for stability test and for measurement of the lateral protection length . 115.8.2 Beam for height of lateral protection test 115.9 Slide gauges 115.10 Force-measuring device 125.11 Test load 125.12 Small

20、parts cylinder 125.13 Small torso probe . 145.14 Device for measuring the angle, the length and the height of the back rest and the height of the lateral protection 155.15 Leg probe . 165.16 Wedge block 166 Test procedures 176.1 General . 176.2 Impact test . 176.3 Durability of the locking mechanism

21、 186.4 Strength of the locking mechanism 186.5 Small parts . 186.6 Openings . 196.6.1 Openings between moving parts 196.6.2 Other openings . 196.7 Strength of harness/belt attachment points 196.8 Strength of components of the restraint system 196.9 Slippage of straps of the restraint system . 196.10

22、 Back rest tests 206.10.1 Determination of back rest angle 206.10.2 Determination of back rest height . 206.10.3 Determination of length of reclinable back rest 206.10.4 Strength of reclinable back rest mechanism . 206.11 Seat vertical static load test 21BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:

23、2012 (E)EN 14988-2:2006+A1:2012 (E) 3 6.12 Footrest vertical static load test 216.13 Lateral protection measurements 216.13.1 Determination of lateral protection height 216.13.2 Determination of lateral protection length 216.14 Leg openings test 236.14.1 Wedge block test . 236.14.2 Gaps between leg

24、openings . 236.15 Measurement of the distance between the backrest and the crotch restraint 236.16 Measurement of the distance between the backrest and the horizontal member 236.17 Stability tests . 246.17.1 General . 246.17.2 Positioning . 246.17.3 Sideways stability 246.17.4 Rearwards stability 25

25、6.17.5 Forwards stability 266.17.6 Footrest and horizontal frame member stability 276.18 Tray tests 286.18.1 Tray strength test 286.18.2 Tray vertical static load test and stability . 286.18.3 Tray drop test . 287 Test report 29BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:2012 (E)EN 14988-2:2006+A1:

26、2012 (E) 4 Foreword This document (EN 14988-2:2006+A1:2012) has been prepared by Technical Committee !CEN/TC 364 “Project Committee - High Chairs”“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical

27、 text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. This document supersedes !EN 14988-2:2006“. This document includes Amendment 1 approved by CEN on 2012-0623. The start and finish of text introduced or alter

28、ed by amendment is indicated in the text by tags !“. This European Standard !consists“ of the following parts: -Part 1: Safety requirements -Part 2: Test methods According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

29、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov

30、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:2012 (E)EN 14988-2:2006+A1:2012 (E) 5 Introduction This part of EN 14988 has been prepared in order to specify test methods to provide assurance that childrens high chairs comply w

31、ith the requirements in Part 1. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:2012 (E)EN 14988-2:2006+A1:2012 (E) 6 1 Scope This European Standard specifies test methods for the

32、assessment of the requirements of childrens high chairs. 2 Normative references The following referenced documents are indispensable for the application of this Technical Specification. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

33、 document (including any amendments) applies. !deleted text“ ISO 7619-2, Rubber vulcanised or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method 3 Terms and definitions !For the purposes of this document, the following terms and definitions apply. 3.1 childrens high

34、 chair free standing chair that elevates the child to approximately dining table height, intended for holding the child from 6 months to 36 months of age who is capable of remaining in a sitting position due to his or her own co-ordination 3.2 crotch restraint strap or bar passing between the legs o

35、f the child which prevents the child from slipping forward out of the high chair 3.3 integral harness assembly intended to retain the child in the high chair comprising either a crotch restraint, waist strap and shoulder straps, or comprising straps that pass over the childs shoulders and between th

36、e childs legs 3.4 waist belt strap, which when fastened, fully surrounds the childs waist 3.5 waist strap strap, which when fastened, goes from one side of the child to the other passing in front of the childs waist 3.6 opening space between structural members or components 3.7 shear and squeeze poi

37、nts gaps which can cause harm to parts of the body and which occur when two parts close together or open during relative movements 3.8 locking device device which is mounted on a frame, and which will maintain parts of the frame in position of use BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:2012 (E

38、)EN 14988-2:2006+A1:2012 (E) 7 3.9 locking mechanism mechanism composed by a locking device and one or more operating devices Note 1 to entry: An action deactivates the locking devices, e.g. pushing a button, pressing a lever or turning a knob. 3.10 junction line intersection of the seat and the bac

39、krest (see Figure 1) Note 1 to entry: The method for determining the junction line can be found in 4.2.“ 4 General test conditions 4.1 Preliminary preparation !The tests are designed to be applied to a high chair that is fully assembled according to manufacturers instructions and ready for use. If t

40、he product can be converted to other products not falling within the scope on this standard (e.g. table and small chair, adult chair, swings, booster seats, etc.), these configurations shall not be tested according to this standard. The tests shall be carried out in indoor ambient condition with a t

41、emperature between 15 C and 25 C. If the temperature lies outside this range, its maximum and minimum shall be recorded in the test report. The high chair shall be tested as delivered. If the high chair is a knock-down type, it shall be assembled according to the instructions supplied with it. If th

42、e instructions allow for different adjustments or configurations of components (e.g. inclination of the backrest, height of the seat, position of the tray, position of castors/wheels, etc.), the most onerous combination shall be used for each test. Knock-down fittings shall be tightened before testi

43、ng. Further re-tightening shall not take place unless this is specifically required by the manufacturers instructions.“ ! 4.2 Determination of the junction line The junction line is shown in Figure 1 below. Where the backrest and the seat do not meet, the junction line is the projection of the backr

44、est onto the seat (see Figure 1). BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A1:2012 (E)EN 14988-2:2006+A1:2012 (E) 8 Key LL junction line 1 backrest 2 seat Figure 1 Junction line When the seat unit is in the form of a hammock, then a theoretical junction line, “LL”, is determined as shown in Figure

45、2. The junction line may vary when the backrest is adjusted in different positions. Key AA top edge of the backrest BB front edge of the seat LL junction line CL vertical projection of C on the hammock Figure 2 Junction line for seat units in form of a hammock“ ! 4.3 Test sequence All tests shall be

46、 carried out on one sample and in the order laid down in this part of EN 14988 except for the test in 6.9, which shall be performed at the end of the whole test procedure.“ 4.4 Tolerances Unless otherwise stated, the following tolerances apply: Forces: 5%; BS EN 14988-2:2006+A1:2012EN 14988-2:2006+A

47、1:2012 (E)EN 14988-2:2006+A1:2012 (E) 9 Masses: 0,5%; Dimensions: 1,0 mm; Angles: 2. Positioning of loading pads: 5 mm The forces may be replaced by masses. The relationship of 10 N = 1 Kg shall be used. 5 Test equipment 5.1 General Unless otherwise specified, test forces may be applied by any suita

48、ble device because results are dependent only upon correctly applied forces and not upon the apparatus. The test forces in the static load tests shall be applied sufficiently slowly to ensure that negligible dynamic forces are applied. 5.2 Test dummy A rigid cylinder 200 mm in diameter and 300 mm in height, having a mass of 15 kg and with its centre of gravity 150 mm above its base. All the edges of the cylinder shall have a radius of 5 mm. Two safety harness anchorage points shall be provided. These shall be positioned 150 mm from the base and 180 to eac