EN 14988-1-2006 en Children-s high chairs - Part 1 Safety requirements (Incorporates Amendment A1 2012)《儿童高位座椅 第1部分 安全要求-1994》.pdf

《EN 14988-1-2006 en Children-s high chairs - Part 1 Safety requirements (Incorporates Amendment A1 2012)《儿童高位座椅 第1部分 安全要求-1994》.pdf》由会员分享，可在线阅读，更多相关《EN 14988-1-2006 en Children-s high chairs - Part 1 Safety requirements (Incorporates Amendment A1 2012)《儿童高位座椅 第1部分 安全要求-1994》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN14988-1:2006Childrens high chairs Part 1: Safety requirementsICS 97.140; 97.190nullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnul

2、l nullnullnullnullnullnullnullnullnull nullnullnull+A1:2012National forewordThis British Standard is the UK implementation of EN 14988-1:2006+A1:2012. It supersedes BS EN 14988-1:2006, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags

3、. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted A list of organizations represented on this subcommittee can be obtained on request to its secretary.Thi

4、s publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 14988-1:2006+A1:2012This British Standard was published under the authority o

5、f the Standards Policy and Strategy Committee on 31 July 2006 The British Standards Institution 2012. Published by BSI Standards Limited 2012Amendments/corrigenda issued since publicationDate Comments30 November 2012 Implementation of CEN amendment A1:2012ISBN 978 0 580 73052 8Technical Committee CW

6、/1, Safety of child use and child care products, to Subcommitee CW/1/5, Nursery furniture.byEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14988-1:2006+A1 August 2012 ICS 97.140; 97.190 Supersedes EN 14988-1:2006English Version Childrens high chairs - Part 1: Safety requirements Chaises hautes

7、 pour enfants - Partie 1: Exigences de scurit Kinderhochsthle - Teil 1: Sicherheitstechnische Anforderungen This European Standard was approved by CEN on 6 February 2006 and includes Amendment 1 approved by CEN on 23 June 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulation

8、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. Th

9、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN mem

10、bers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

11、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by an

12、y means reserved worldwide for CEN national Members. Ref. No. EN 14988-1:2006+A1:2012: E2 Contents Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 Materials .74.1 Materials and surfaces 75 Construction .75.1 General 75.2 Holes, gaps and openings 85.3 Moving

13、 parts .85.3.1 Shear and squeeze points when setting up and folding away .85.3.2 Shear and squeeze points under the influence of powered mechanism .85.3.3 Shear and squeeze points under the influence of body weight or other external forces 85.4 Locking mechanisms for folding high chairs .95.4.1 Gene

14、ral 95.4.2 Incomplete deployment .95.4.3 Unintentional folding of the high chair 95.4.4 Locking mechanism strength .95.5 Small parts 95.6 Restraint system 95.6.1 General 95.6.2 Requirements for high chairs with an active restraint system 105.6.3 Requirements for high chairs with a passive restraint

15、system . 105.7 Lateral protection 115.7.1 General . 115.7.2 Lateral protection length and height for high chairs fitted with an active restraint system. 115.7.3 Lateral protection length and height for high chairs with a passive restraint system 115.8 Back rest 125.9 Reclinable back rest . 125.10 Se

16、at front edge 125.11 Castors and wheels 125.12 Structural integrity 125.13 Durability of locking mechanism 126 Stability 126.1 General . 126.2 Sideways 126.3 Rearwards 126.4 Forwards 126.5 Footrest 136.6 Tray 137 Packaging 138 Product information 138.1 General . 138.2 Marking 138.3 Instructions for

17、use 148.3.1 Warnings 14BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)3 8.3.2 Additional information 14Annex A (informative) A- deviations . 15BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)4 Foreword This document (EN 14988-1:2006+A1:2012) has been prepared by Technical Committee !CEN

18、/TC 364 “Project Committee - High Chairs”“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be with

19、drawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 14988-1:2006“. This

20、 document includes Amendment 1 approved by CEN on 2012-06-23. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This European Standard consists of the following parts: - Part 1: Safety requirements - Part 2: Test methods According to the CEN/CENELEC

21、 Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

22、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)5 Introduction This European standard is intended to minimise

23、 accidents to children resulting from normal use and reasonably foreseeable misuse of childrens high chairs. BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)6 1 Scope This European Standard specifies safety requirements for childrens high chairs intended for children from 6 months to 36 months

24、 of age. If the product can be converted into a product for which an EN safety standard exists, the product shall also fulfil the requirements of that standard. 2 Normative references The following referenced documents are indispensable for the application of this Technical Specification. For dated

25、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1, Safety of toys Part 1: Mechanical and physical properties EN 71-3, Safety of toys Part 3: Migration of certain elements !EN 14988-2:2006+A1:2

26、012“, Childrens high chairs Part 2: Test methods 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 childrens high chair free standing chair that elevates the child to approximately dining table height, intended for holding the child fr

27、om 6 months to 36 months of age who is capable of remaining in a sitting position due to his or her own co-ordination. 3.2 crotch restraint strap or bar passing between the legs of the child which prevents the child from slipping forward out of the high chair. 3.3 integral harness assembly intended

28、to retain the child in the high chair comprising either a crotch !restraint“, waist strap and shoulder straps, or !comprising“ straps that pass over the childs shoulders and between the childs legs. 3.4 waist belt strap, which when fastened, !fully“ surrounds the childs waist. !3.5 waist strap strap

29、, which when fastened, goes from one side of the child to the other passing in front of the childs waist“ !3.6“ opening space between structural members or components BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)7 !3.7“ shear and squeeze points gaps which can cause harm to parts of the body

30、 and which occur when two parts close together or open during relative movements !3.8“ locking device device which is mounted on a frame, and which will maintain parts of the frame in position of use !3.9“ locking mechanism mechanism composed by a locking device and one or more operating devices. An

31、 action deactivates the locking devices, e.g. pushing a button, pressing a lever or turning a knob !3.10 junction line intersection of the seat and the backrest (see Figure 1) Key LL junction Line 1 backrest 2 seat Figure 1 Junction line“ 4 Materials 4.1 Materials and surfaces Materials shall be vis

32、ually clean and free of infestation. The manufacturer/importer/retailer shall provide verification that accessible materials and surfaces meet the relevant requirements of EN 71-3. 5 Construction 5.1 General The requirements apply to a high chair assembled and erected in accordance with the manufact

33、urers instructions. If parts of the high chair are designed to be removable (e.g. a tray or a footrest), the requirements apply to the high chair with and without these part(s). BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)8 Connecting screws for direct fastening, e.g. self tapping screws,

34、shall not be used for the assembly of any component that is designed to be removed or loosened when dismantling the high chair for the purpose of transportation or storage. Exposed edges and protruding parts shall be rounded or chamfered and free from burrs and sharp edges. 5.2 Holes, gaps and openi

35、ngs With the exception of all parts of the high chair below the under-surface of the seat, the integral harness and the waist belt, there shall be no holes, gaps or openings between 7 mm and 12 mm accessible when the child is seated, which are deeper than 10 mm, when tested in accordance with !EN 14

36、988-2:2006+A1:2012“, clause 6.6.2. With the exception of the entrance to the seat unit and the two openings for the childs legs to pass through, there shall be no holes, gaps or openings above the seat surface which allows the small torso probe to pass through when tested according to !EN 14988-2:20

37、06+A1:2012“, clause 6.6.2. 5.3 Moving parts The requirements of this clause do not apply to locking mechanisms. To avoid the risk of shearing and crushing, shear and compression points shall be avoided. If shear and compression points cannot be eliminated for functional reasons, then the conditions

38、for individual cases in 5.3.1, 5.3.2 and 5.3.3 shall be applied. 5.3.1 Shear and squeeze points when setting up and folding away Shear and squeeze points that are accessible only when the product is being set up or folded away are permitted if they are not under the influence of a powered mechanism.

39、 5.3.2 Shear and squeeze points under the influence of powered mechanism If shear and squeeze points are created by parts operated by spring force or other sources of energy, the distance between moving parts shall not be less than 18 mm unless the distance is always less than 5 mm when tested accor

40、ding to !EN 14988-2:2006+A1:2012“,clause 6.6.1. 5.3.3 Shear and squeeze points under the influence of body weight or other external forces When tested in accordance with !EN 14988-2:2006+A1:2012“, clause 6.6.1, any part of the product which can fold or be detached shall be locked to avoid release by

41、 the child using the product, by another child or by unintentional action by an adult. Unintentional movement is ruled out if: a) locking mechanism is automatically engaged and the load has a closing effect on the locking mechanism; or b) at least two independent locking mechanisms are provided for

42、the movable part or system; or c) locking mechanisms under load cannot be released unintentionally. When the product has been deployed for use, there shall be no accessible squeeze points which can be closed to less than 12 mm when tested according to !EN 14988-2:2006+A1:2012“ clause 6.6.2. BS EN 14

43、988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)9 5.4 Locking mechanisms for folding high chairs 5.4.1 General Locking mechanisms are required to prevent a high chair from folding whilst a child is in the high chair and also when a child is being put in and taken out of the high chair. 5.4.2 Incomplet

44、e deployment To avoid the hazard due to incomplete deployment, either: a) weight of the child using the product shall act to prevent the folding; or b) at least one locking mechanism shall engage automatically when the product is deployed for use. ! 5.4.3 Unintentional folding of the high chair Unin

45、tentional folding of the high chair shall be avoided. This requirement is fulfilled if: a) at least one locking mechanism requires a minimum force of 50 N before and after test in accordance with EN 14988-2:2006+A1:2012, 6.3, or b) at least one locking mechanism requires the use of a tool to be rele

46、ased, or c) folding is only possible when two independent locking mechanisms are operated simultaneously, or d) there are two or more automatically engaging locking devices that cannot be released by one single action, or e) folding of the high chair requires two consecutive actions, the first of wh

47、ich shall be maintained while the second is carried out.“ 5.4.4 Locking mechanism strength When tested in accordance with !EN 14988-2:2006+A1:2012“, clause 6.4, the high chair shall not collapse. The locking mechanism shall remain engaged. 5.5 Small parts When tested in accordance with !EN 14988-2:2

48、006+A1:2012“, clause 6.5, no part that can be detached shall fit wholly within the cylinder. Parts that clearly will not fit in this cylinder shall not be tested. Any component intended to be removable without the use of a tool shall not fit wholly within the cylinder. ! 5.6 Restraint system 5.6.1 G

49、eneral The high chair shall have an active restraint system complying with 5.6.2 or a passive restraint system complying with 5.6.3. BS EN 14988-1:2006+A1:2012 EN 14988-1:2006+A1:2012 (E)10 If the backrest can be reclined to less than 60 to the horizontal, measured in accordance with EN 14988-2:2006+A1:2012, 6.10.1, the product shall have an active restraint system complying with 5.6.2. All straps of the restraint system, shall have a minimum width of 19 mm. Wh