EN 14978-2006 2881 Laminate floor coverings - Elements with acrylic based surface layer electron beam cured - Specifications requirements and test methods《叠层地板覆盖物 电子束硬化丙烯酸基表层元件 规范 .pdf

《EN 14978-2006 2881 Laminate floor coverings - Elements with acrylic based surface layer electron beam cured - Specifications requirements and test methods《叠层地板覆盖物 电子束硬化丙烯酸基表层元件 规范 .pdf》由会员分享，可在线阅读，更多相关《EN 14978-2006 2881 Laminate floor coverings - Elements with acrylic based surface layer electron beam cured - Specifications requirements and test methods《叠层地板覆盖物 电子束硬化丙烯酸基表层元件 规范 .pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN14978:2006Laminate floor coverings Elements with acrylic based surface layer, electron beam cured Specifications, requirements and test methodsThe European Standard EN 14978:2006 has the status of a British StandardICS 97.150g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3

2、g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIBS EN 14978:2006This British Standard was published under the authori

3、ty of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006ISBN 0 580 48463 7National forewordThis British Standard is the official English language version of EN 14978:2006. The UK participation in its preparation was entrusted to Technical Committee PRI/060, Resilient floor covering

4、s, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the

5、section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application

6、. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor rela

7、ted international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Ame

8、ndments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14978June 2006ICS 97.150English VersionLaminate floor coverings - Elements with acrylic based surfacelayer, ele

9、ctron beam cured - Specifications, requirements andtest methodsRevtements de sol stratifis - lments parement base acrylique traits par des faisceaux dlectrons -Spcifications, exigences et mthodes dessaiLaminatbden - Elemente mit einerelektronenstrahlgehrteten Deckschicht auf Acryl-Basis -Spezifikati

10、on, Anforderungen und PrfverfahrenThis European Standard was approved by CEN on 18 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date l

11、ists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the respon

12、sibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland,

13、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-105

14、0 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14978:2006: ELicensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative ref

15、erences . 4 3 Terms and definitions. 5 4 Characteristics 5 5 Classification. 6 5.1 General. 6 5.2 Floor coverings with a common gloss level 6 5.3 Floor coverings with a high gloss level 6 6 Additional characteristics and requirements.7 7 Marking, designation and packaging 8 7.1 Marking 8 7.2 Designa

16、tion 9 7.3 Packaging 9 8 Test report . 9 Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 3 Foreword This document (EN 14978:2006) has been prepared by Technical Committee CEN/TC 134 “CEN/TC 134 Resilient, textile and laminate floor coverings”, t

17、he secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. Accordi

18、ng to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania

19、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 4 1 Scope This European Standard specifies requirements for l

20、aminate floor coverings with an acrylic based surface layer (as defined in Clause 3). It includes a classification system based on EN 685, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the

21、consumer to make an informed choice. It also specifies requirements for marking and packaging. Laminate floor coverings are considered for domestic and commercial levels of use. This standard does not specify requirements related to areas that are subjected to frequent wetting, such as bathrooms, la

22、undry rooms or saunas, but the products covered by this standard are applicable for use in domestic kitchens. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references

23、, the latest edition of the referenced document (including any amendments) applies. EN 322, Wood-based panels - Determination of moisture content EN 424, Resilient floor coverings - Determination of the effect of the simulated movement of a furniture leg EN 425, Resilient and laminate floor covering

24、s - Castor chair test EN 438-2, High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties EN 438-5, High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part

25、 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates EN 685, Resilient, textile and laminate floor coverings - Classification EN 12529:1998, Castors and wheels - Castors for furniture - Castors for swivel chairs Require

26、ments EN 13329:2006, Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods EN 14354:2004, Wood-based panels - Wood veneer floor covering EN ISO 2813, Paints and varnishes - Determination of specular gloss o

27、f non-metallic paint films at 20, 60 and 85 (ISO 2813:1994, including Technical Corrigendum 1:1997) Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in E

28、N 13329:2006 and the following apply. 3.1 laminate floor covering floor covering with a surface layer consisting of one or more thin sheets of a decorative material (usually paper), impregnated with either aminoplastic, thermosetting resins (usually melamine) or impregnated and surfaced with an acry

29、late and/or metacrylate resin NOTE 1 By the simultaneous action of heat and pressure, the sheets impregnated with aminoplastic resins are either pressed as such (HPL, CPL, Compact) and in the case of HPL and CPL bonded to a substrate (usually wood-based panels), or in the case of DPL, directly press

30、ed to a substrate (usually wood-based panels). NOTE 2 When using acrylate and/or metacrylate resins the simultaneous action of electron beams and pressure are used to produce the thin sheets, which are then bonded to a substrate (usually wood-based panels). NOTE 3 The product is usually finished wit

31、h a backing (e.g. HPL, CPL, EPL, impregnated papers and veneers) primarily used as a balancing material. 3.2 acrylic based surface layer upper decorative layer intended to be the visible side when the floor is installed NOTE This layer consists of resins which are hardened using electron beams (norm

32、ally acrylate, metacrylate or similar) and impregnated and surfaced decorative materials (normally paper), which all together are hardened through the application of a sufficient dose of electron beams and constant pressure. The surface layer produced with this technique is called Electron-beam Pres

33、sed Laminates (EPL). 4 Characteristics Laminate floor coverings according to this standard shall conform to the general requirements given in EN 13329:2006, Table 1, with the following modifications: for special applications, such as decorative pattern effects, tighter tolerances shall be permitted

34、if necessary; tolerances of the tongue and groove shall be such that when, for the purposes of testing, the elements are assembled without glue, the maximum permissible opening and height difference values are not exceeded; to determine the capability of laminate floor coverings to withstand ambient

35、 humidity variations, a laboratory test in controlled conditions shall be made. Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 6 5 Classification 5.1 General For all laminate floor coverings conforming to this standard, a distinction between th

36、e two specular gloss-levels of the surface layer shall be done prior to classification testing. The specular gloss level shall be determined following testing in accordance with EN ISO 2813 with a detection angle of 60 . The distinction between the two specular gloss levels shall be as follows: comm

37、on gloss level specular gloss level 85 units high gloss level specular gloss level 85 units 5.2 Floor coverings with a common gloss level Laminate floor coverings conforming to this standard with a common gloss level as described in 5.1, shall be classified as being suitable for different levels of

38、use according to the requirements specified in EN 13329:2006, Table 2, when tested by the methods given therein. Classification shall conform to the scheme specified in EN 685. 5.3 Floor coverings with a high gloss level Laminate floor coverings conforming to this standard, with a high gloss level a

39、s described in 5.1, shall be classified as being suitable for different levels of use according to the requirements specified in Table 1, when tested by the methods given therein. Classification shall conform to the scheme specified in EN 685. Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 200

40、6, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 7 Table 1 Classification requirements and levels of use for floor coverings with a high gloss level Levels of use Domestic Commercial Moderate General Heavy Moderate Class: 21 22 23 31 Test method Wear resistance 3 000 rev. 4 000 rev. 7 000 rev. EN 1435

41、4:2004, Annex D Impact resistance IC 1 EN 13329:2006 Annex F Resistance to staining 4, (groups 1 and 2) 3, (groups 3) 5, (groups 1 and 2) 4, (groups 3) EN 438-2 Resistance to cigarette burns _ 3 EN 438-2 Effect of a furniture leg _ No change shall be visible when tested with foot type 0 EN 424 Effec

42、t of a castor chair _ No change in appearance or damage, as defined in EN 425. Single-wheel castors as defined in EN 12529:1998, 5.4.4.2 (Type W) shall be used. EN 425 Thickness swelling 20,0 % 18,0 % EN 13329:2006 Annex G 6 Additional characteristics and requirements When any of the characteristics

43、 given in Table 2 are called for to specific applications, the laminate floor coverings shall be tested by the methods given therein. NOTE The properties that are stated in Table 2 are considered important for some specific products or applications. Table 2 Additional characteristics and requirement

44、s Characteristic Requirement Test method Humidity at dispatch from the manufacturer The elements shall have a moisture content of 4 % to 10 %. Any single batch shall be homogeneous with Hmax. Hmin. 3 % EN 322 Appearance, surface defects Minor surface defects as defined in EN 438-5 shall be permitted

45、 EN 438-5 Resistance to scratching The elements shall have a minimum resistance to scratching of rating 3 when tested as per EN 438-2 EN 438-2 Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 8 7 Marking, designation and packaging 7.1 Marking Lam

46、inate floor coverings conforming to this standard, shall have the following information clearly marked by the manufacturer either on their packaging, or on a label or information sheet included in the packaging: a) number of this European Standard; b) manufacturers and/or suppliers identification; c

47、) product name; d) colour/pattern/gloss and batch number; e) symbol appropriate to the class of product according to Table 3; f) nominal dimensions of one floor covering element in millimetres; g) number of elements contained in a package; h) area in square metres contained in a package. Table 3 Cla

48、ssification symbols Domestic Commercial Moderate General Heavy Licensed Copy: Wang Bin, na, Fri Sep 15 03:38:11 BST 2006, Uncontrolled Copy, (c) BSIEN 14978:2006 (E) 9 7.2 Designation The received class for level of use shall be shown as a suffix to this standard reference. Example for the designati

49、on of a laminate floor covering for general domestic use according to this standard with the class 22: Laminate floor covering EN 14978-22 NOTE Reference to this standard, EN 14978, should be made for laminate floor coverings with an acrylic-based surface layer and not to EN 13329. 7.3 Packaging Laminate floor coverings shall be delivered in packages designed to protect the corners, edges and surfaces of the product under normal conditions of transport and handling. Installation, cleaning and maintenance instructions sh