EN 14309-2015 en Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification《应用于建筑设备和工业设施的.pdf

《EN 14309-2015 en Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification《应用于建筑设备和工业设施的.pdf》由会员分享，可在线阅读，更多相关《EN 14309-2015 en Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification《应用于建筑设备和工业设施的.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 14309:2015Thermal insulation productsfor building equipment andindustrial installations Factory made products ofexpanded polystyrene (EPS) SpecificationBS EN 14309:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14309:2015. It

2、 supersedes BS EN 14309:2009+A1:2013 which iswithdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This p

3、ublication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 88442 9 ICS 91.100.60 Compliance with a British Standard cannot confer i

4、mmunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedBS EN 14309:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14309 December

5、 2015 ICS 91.100.60 Supersedes EN 14309:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification Produits isolants thermiques pour lquipement du btiment et les installations indus

6、trielles - Produits manufacturs en polystyrne expans (PSE) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) - Spezifikation This European Standard was approved by CEN on

7、 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards ma

8、y be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

9、to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

10、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managemen

11、t Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14309:2015 EBS EN 14309:2015EN 14309:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, defini

12、tions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 9 3.2 Symbols, units and abbreviated terms . 10 3.2.1 Symbols and units used in this standard . 10 3.2.2 Abbreviated terms u

13、sed in this standard 12 4 Requirements 12 4.1 General . 12 4.2 For all applications 12 4.2.1 Thermal conductivity . 12 4.2.2 Dimensions and tolerances 13 4.2.3 Dimensional stability 13 4.2.4 Reaction to fire of the product as placed on the market 14 4.2.5 Durability characteristics . 14 4.3 For spec

14、ific applications 15 4.3.1 General . 15 4.3.2 Maximum service temperature . 15 4.3.3 Minimum service temperature . 15 4.3.4 Dimensional stability under specified temperature and humidity conditions . 15 4.3.5 Compressive stress at 10 % deformation 15 4.3.6 Tensile strength perpendicular to faces 16

15、4.3.7 Bending strength 16 4.3.8 Compressive creep. 17 4.3.9 Water absorption . 18 4.3.10 Water vapour transmission 18 4.3.11 Apparent density 19 4.3.12 Dynamic stiffness . 19 4.3.13 Compressibility . 19 4.3.14 Trace quantities of water soluble ions and pH 20 4.3.15 Release of dangerous substances .

16、20 4.3.16 Continuous glowing combustion 21 5 Test methods . 21 5.1 Sampling 21 5.2 Conditioning . 21 5.3 Testing 21 5.3.1 General . 21 5.3.2 Thermal conductivity . 23 5.3.3 Reaction to fire 24 6 Designation code 24 7 Assessment and Verification of the Constancy of Performance (AVCP) . 25 BS EN 14309

17、:2015EN 14309:2015 (E) 37.1 General . 25 7.2 Product Type Determination (PTD) 25 7.3 Factory Production Control (FPC) 25 8 Marking and labelling . 26 Annex A (normative) Factory production control . 27 A.1 Indirect testing 30 Annex B (normative) Product classification 34 Annex C (normative) Determin

18、ation of minimum service temperature . 35 C.1 Definitions . 35 C.2 Principle . 35 C.3 Apparatus 35 C.4 Test specimens 35 C.5 Procedure 36 C.6 Calculation and expression of results . 36 C.7 Accuracy of measurements . 37 C.8 Test report 37 Annex D (informative) Additional properties . 39 D.1 General .

19、 39 D.2 Long-term compressive behaviour 39 D.3 Shear behaviour 39 D.4 Water vapour diffusion resistance factor 40 D.5 Coefficient of thermal expansion 40 D.6 Behaviour under cyclic loading . 40 D.7 Test methods 41 D.8 Additional information . 41 Annex ZA (informative) Clauses of this European Standa

20、rd addressing the provisions of the EU Construction Products Regulation . 42 ZA.1 Scope and relevant characteristics 42 ZA.2 Procedures for AVCP of factory made products of expanded polystyrene (EPS) 44 ZA.3 CE Marking and labelling . 51 Bibliography . 53 BS EN 14309:2015EN 14309:2015 (E) 4 European

21、 foreword This document (EN 14309:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by e

22、ndorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for id

23、entifying any or all such patent rights. This document supersedes EN 14309:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been

24、made in this new edition of EN 14309 are the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.15; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a

25、 mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible

26、 authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational cond

27、itions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control; Annex B (normative), Product classification; Annex C (normative), Determination of minimum servic

28、e temperature; Annex D (informative), Additional properties; BS EN 14309:2015EN 14309:2015 (E) 5 Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a s

29、eries of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of sta

30、ndards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation pr

31、oducts, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory m

32、ade flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Facto

33、ry made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations

34、 Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for bui

35、lding equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building

36、 equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

37、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, S

38、witzerland, Turkey and the United Kingdom. BS EN 14309:2015EN 14309:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating te

39、mperature range of approximately - 180 C to + 80 C. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this standard. Below an operating temperature of - 50 C, special tests regarding the suitability of the product in the intended application are advised

40、(e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, rolls, lags, pipe sections or other prefabricated ware. This standard describes product characteristics and includes procedures for testing, evalua

41、tion of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given p

42、roperty that should be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(mK) at 10 C

43、are not covered by this standard. This standard does not cover products for in situ insulation (for loose fill or poured insulation) or products for the insulation of the building structure. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docum

44、ent and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and w

45、idth EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 825, Thermal insulating products for building applications - Determination of flatness EN 826, Thermal insula

46、ting products for building applications - Determination of compression behaviour EN 1602, Thermal insulating products for building applications - Determination of the apparent density EN 1603, Thermal insulating products for building applications - Determination of dimensional stability under consta

47、nt normal laboratory conditions (23 C/ 50 % relative humidity) EN 1604, Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications - Determination of

48、 compressive creep EN 1607, Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces BS EN 14309:2015EN 14309:2015 (E) 7EN 12085, Thermal insulating products for building applications - Determination of linear dimensions of test specimens EN 12

49、086, Thermal insulating products for building applications - Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications - Determination of long term water absorption by immersion EN 12088, Thermal insulating products for building applications - Determination of long term water absorption by diffusion EN 12089, Thermal insulating products for building applications - Determination of bending behaviour EN 12091, Thermal insulating products for building app