EN 908-1999 en Agricultural and forestry machinery - Reel machines for irrigation - Safety (Incorporates Amendment A1 2009)《农业和森林机械 灌溉用卷轴机的安全性 包含修改件A1-2009》.pdf

《EN 908-1999 en Agricultural and forestry machinery - Reel machines for irrigation - Safety (Incorporates Amendment A1 2009)《农业和森林机械 灌溉用卷轴机的安全性 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 908-1999 en Agricultural and forestry machinery - Reel machines for irrigation - Safety (Incorporates Amendment A1 2009)《农业和森林机械 灌溉用卷轴机的安全性 包含修改件A1-2009》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD ICS 65.060.35; 65.060.80

2、NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Agricultural and forestry machinery Reel machines for irrigation Safety BS EN 908:1999 +A1:2009National foreword This British Standard is the UK implementation of EN 908:1999+A1:2009. It supersedes BS EN 908:1999, which is withdr

3、awn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to

4、 Technical Committee AGE/30, Irrigation and drainage equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicatio

5、n. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 908:1999+A1:2009 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 Ap

6、ril 1999 BSI 2009 Amendments/corrigenda issued since publication Date Text affected 31 October 2009 Implementation of CEN amendment Al:2009 ISBN 978 0 580 62820 7 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 908:1999+A1 July 2009 ICS 65.060.35 Supersedes EN 908:1999 English Version Agricultu

7、ral and forestry machinery - Reel machines for irrigation - Safety Matriel agricole et forestier - Enrouleurs dirrigation - Scurit Land- und Forstmaschinen - Beregnungsmaschinen mit Schlauchtrommel - Sicherheit This European Standard was approved by CEN on 14 December 1998 and includes Amendment 1 a

8、pproved by CEN on 23 May 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

9、 standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and noti

10、fied to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma

11、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exp

12、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 908:1999+A1:2009: EEN 908:1999+A1:2009 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 4 2 Normative references 4 3 Definitions 5 4 Safety requirements and/or measures 6 4.1 General 6 4.2 Irrigatio

13、n gun 6 4.3 Guiding system of hose 6 4.4 Spool .6 4.5 Stability .7 4.6 Orientation of the turret 7 4.7 Hydraulic lifting 7 4.8 Accessories 7 4.9 Transport 7 5 Verification of safety requirements and/or measures 7 6 Information for use 8 6.1 Instruction handbook 8 6.2 Marking .8 Annex A (normative) L

14、ist of hazards 10 Annex ZA (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ “ “ “ 15 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “ 16 BS EN

15、908:1999+A1:2009EN 908:1999+A1:2009 (E) 3 Foreword This document (EN 908:1999+A1:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national

16、standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. This document includes Amendment 1, approved by CEN on 2009-05-23. This European Standard supersedes EN 908:1999

17、. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !F

18、or relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Annex A is normative and contains the “List of hazards“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound t

19、o implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

20、erland and United Kingdom. BS EN 908:1999+A1:2009EN 908:1999+A1:2009 (E) 4 Introduction The extent to which hazards are covered is indicated in the scope of this standard. These hazards are specific to reel machines for irrigation. The hazards that are common to all the agricultural machines (self-p

21、ropelled, mounted, semi-mounted and trailed) will be dealt with in a standard currently in preparation (prEN 1553). 1 Scope This standard specifies safety requirements and their verification for the design and construction of reel machines for irrigation including self-propelled machines. It describ

22、es methods for elimination or reduction of risks which need specific requirements for reel machines for irrigation. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in

23、annex A. Annex A also indicates the hazards which have not been dealt with. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard. 2 Normative references This European Standard incor

24、porates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Euro

25、pean Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 292-1: 1991, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology. EN 292-2:1991, Safety of ma

26、chinery Basic concepts, general principles for design Part 2: Technical principles and specifications (and amendment A1:1995). EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 953:1997, Safety of machinery Guards General requirements for

27、the design and construction of fixed and movable guards. prEN 1553:1998, Agricultural machinery Agricultural self-propelled, mounted, semi-mounted and trailed machines Common safety requirements. BS EN 908:1999+A1:2009EN 908:1999+A1:2009 (E) 5 3 Definitions For the purpose of this standard, the defi

28、nitions given in EN 292-1:1991 and EN 292-2:1991 apply together with the following: 3.1 reel machine type of traveller irrigation machine featuring a stationary structure with a reel, coiling a hose which carries irrigation water to, and drags, a travelling cart, upon which is affixed the emitting s

29、ystem, which is most often an irrigation gun 3.2 irrigation gun large sprinkler used on reel machines and other systems NOTE The usual flow-rates from guns range from 10 m 3 /h to 100 m 3 /h, and their nozzle diameter from 10 mm to 40 mm. 3.3 coiling one of the actions performed by the reel machine

30、when irrigating: the reel machine is progressively coiling all the polyethylene hose on the drum, causing the irrigation gun to move regularly across the irrigation field. When the irrigation gun reaches the machine, the coiling is completed and the machine stops 3.4 guiding system lateral guiding d

31、evice of the hose that permits its steady coiling with joined spirals 3.5 drive system of the guiding system mechanism providing power to the guiding system that ensures the even layering of the hose 3.6 sweeping zone envelope of the different positions of the turret corresponding to its different p

32、ossible orientations 1 - Drum of the spool 2 - Turret 3 - Hose guiding system 4 - Irrigation gun Figure 1 BS EN 908:1999+A1:2009EN 908:1999+A1:2009 (E) 6 4 Safety requirements and/or measures 4.1 General The reel machines for irrigation shall comply as appropriate with EN 292 for hazards which are n

33、ot dealt with and especially with annex A of EN 292-2:1991/A1:1995 when EN 292 does not give precise requirements. Unless otherwise specified in this standard, the machine shall comply with the requirements of prEN 1553:1998 and with tables 1, 3, 4 and 6 of EN 294:1992. 4.2 Irrigation gun The adjust

34、ment controls of the irrigation gun that have to be operated during the working (for example adjustment of the sector angle and of the rotation speed of the irrigation gun) shall be located at a distance less than 1,80 m from the ground or from the access platform, whatever the speed of rotation of

35、the irrigation gun. Irrigation guns with a speed of rotation greater than 1 rad.s -1shall be located at a height equal to or more than 2 m from the ground or from any platform (vertical distance between the ground or the platform and the lowest rotating part of the irrigation gun). This requirement

36、does not apply: when the swivelling range of the irrigation gun is restricted to a maximum of 300 provided that the adjustment platform be located outside the swivelling range; when the irrigation gun is fitted with a guard providing a safety distance in accordance with EN 294:1992. 4.3 Guiding syst

37、em of hose When the coiling speed of the hose is greater than 0,4 m.s -1 , access to crushing and shearing points between the hose and the guiding system and between the guiding system and the frame of the machine shall be prevented by fixed guards according to EN 953 or by the framework of the mach

38、ine using the safety distances according to table 1 of EN 294:1992. When the uncoiling speed of the hose can be greater than 0,4 m.s-1, access to crushing and shearing points between the guiding system and the frame of the machine shall be prevented by fixed guards according to EN 953 or by the fram

39、ework of the machine using the safety distances of table 1 of EN 294:1992. Access to the drive system of the guiding system shall be prevented by fixed guards according to EN 953. 4.4 Spool If the rotation of the drum generates crushing or shearing points between the spool and the machine frame, suc

40、h points shall be guarded. Satisfactory methods include for example: a guard providing the safety distance according to tables 3 and 4 of EN 294:1992; or a full (without opening) side wall without any prominent feature including the water delivery pipe between the axis of the drum and the hose. Mach

41、ines equipped with hose speed selector shall be fitted with: BS EN 908:1999+A1:2009EN 908:1999+A1:2009 (E) 7 a device which allows for the removal of tension from the hose before changing gear; or a device which enables the operator to change gear under tension. 4.5 Stability Any means needed to ens

42、ure stability when working (e.g. jacks, supporting wheels) shall be an integral part of the machine. They shall comply with 4.3.2.1.1. of prEN 1553:1998. The machine shall be stable when resting on a slope of 8,5 in the following conditions: without using the additional means to ensure stability; ho

43、ses full of water and with irrigation gun hooked; in all the directions of the turret around its vertical axis (if applicable); with the axle positioned parallel, then perpendicular to the slope. Any functional outlet of water, associated with the use of the machine, except the possible leakages, sh

44、all be at a minimum distance of 5 m away from the machine. 4.6 Orientation of the turret If applicable, turrets shall be lockable in both working and transport positions. The centre of gravity of the mobile part shall be located at less than 0,20 m from its rotational axis when the hoses are filled

45、of water. Failing this, the rotation shall be ensured by a hold-to-run control device located outside from the sweeping zone. 4.7 Hydraulic lifting When hydraulic lifting systems are used, they shall be fitted with antifall devices to ensure a falling speed of less than 0,1 m.s -1in the event of rup

46、ture of a hydraulic pipe. 4.8 Accessories An appropriate housing shall be provided on the machine for the storage of specific tools. 4.9 Transport The hose reel or machine shall be provided with means for attaching the hose to the machine during transportation. 5 Verification of safety requirements

47、and/or measures Dimensions, where given, shall be verified by measurements. Controls shall be verified by a functional test and positional measurements; guards by functional tests. BS EN 908:1999+A1:2009EN 908:1999+A1:2009 (E) 8 6 Information for use 6.1 Instruction handbook Comprehensive instructio

48、ns and information on all aspects of maintenance and the safe use of the machine shall be provided in the instruction handbook. It shall comply with 5.5 of EN 292-2:1991. In particular, the following points shall be emphasized: a) the hazards that may occur when adjusting the machine while it is ope

49、rating; b) the hazards due to any lack of stability caused by steep slopes or difficult working conditions; c) the risk of touching overhead power lines with the machine or the water jets; d) dangers due to the hazard of instability of the hose reel during operation and the use of jacks or supporting wheels where necessary; e) the speed of rotation if it is more than 1 rad.s -1 ; f) the hazards of unforeseeable rotation of the drum around its vertical axis; g) the unrolli