EN 716-1-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 1 Safety requirements (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第1部分 安全性要求》.pdf

《EN 716-1-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 1 Safety requirements (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第1部分 安全性要求》.pdf》由会员分享，可在线阅读，更多相关《EN 716-1-2008 en Furniture - Children-s cots and folding cots for domestic use - Part 1 Safety requirements (Incorporates Amendment A1 2013)《家具 家用儿童床和折叠床 第1部分 安全性要求》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 716-1:2008Furniture Childrens cots and folding cots for domestic use Part 1: Safety requirementsICS 97.140; 97.190 BS EN 716-1:2008 +A1:2013BS EN Incorporating corrigendum June 2013BS EN 716-1:2008This British Standard was published under the authority of the Standards Policy a

2、nd Strategy Committee on 31 July 2008 BSI 2008ISBN 978 0580 57969 1National forewordThis British Standard is the UK implementation of EN 716-1:2008. It supersedes BS 7423:1999 and BS EN 716-1:1996, which are withdrawn.BSI, as a member of CEN, is obliged to publishEN 716-1as a British Standard.Howeve

3、r, attention isdrawn to the fact that during the development of this European Standard,the UK committee voted against its approval as aEuropean Standard.The reason for this disapproval was that, in the opinion of the UK Committee, BS EN 716-1 does not address the safety issues related to the interac

4、tion of other products that might be supplied and intended to be attached to cots. In these instances, an additional risk assessment should be undertaken. The UK participation in its preparation was entrusted to Technical Committee CW/41, Child use and care articles.A list of organizations represent

5、ed on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corri

6、genda issued since publicationDate CommentsBS EN 716-1:2008+A1:2013ISBN 978 0 580 70908 1Amendments/corrigenda issued since publicationDate Comments28 February 2013 Implementation of CEN amendment A1:2013This British Standard was published under the authority of the Standards Policy and Strategy Com

7、mittee on 31 July 2008 The British Standards Institution 2013. Published by BSI Standards Limited 2013National forewordThis British Standard is the UK implementation of EN 716-1:2008+A1:2013. It supersedes BS EN 716-1:2008, which is withdrawn.The UK participation in its preparation was entrusted by

8、Technical Committee CW/1, Safety of child use and child care products, to Subcommittee CW/1/5, Nursery furniture.A list of organizations represented on this subcommittee can be obtained on request to its secretary.The publication does not purport to include all the necessary provisions of a contract

9、. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.ISBN 978 0 580 82818 8Amendments/corrigenda issued since publicationDate Comments28 February 2013 Implementation of CEN amendment A1:201330 June 2013 Implementation of

10、 CEN Correction Notice 20 March 2013Strategy Committee Institution 2013. The CEN Correction Notice 20 March 2013 provided a revised English language text. Changes implemented by this Correction Notice are listed after the CEN foreword.The UK participation in its preparation was entrusted by Technica

11、l Committee CW/1, Safety of child use and child care products, to Subcommittee CW/1/5, Nursery furniture.A list of organizations represented on this subcommittee can be obtained on request to its secretary.The publication does not purport to include all the necessary provisions of a contract. Users

12、are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 716-1:2008+A1 January 2013 ICS 97.140 Supersedes EN 716-1:2008English Version Furniture - Childrens cots and folding cots

13、for domestic use - Part 1: Safety requirements Meubles - Lits nacelle fixes et pliants usage domestique pour enfants - Partie 1 : Exigences de scurit Mbel - Kinderbetten und Reisekinderbetten fr den Wohnbereich - Teil 1: Sicherheitstechnische AnforderungenThis European Standard was approved by CEN o

14、n 2 February 2008 and includes Amendment 1 approved by CEN on 17 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi

15、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp

16、onsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re

17、public of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NOR

18、MALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 716-1:2008+A1:2013: EEN 716-1:2008+A1:2013 (E) 2 Contents Page Foreword . 3 1 Scope

19、 4 2 Normative references . 4 3 Terms and definitions 4 4 Safety requirements . 5 4.1 General . 5 4.2 Materials . 5 4.2.1 Materials and surfaces . 5 4.2.2 Flammability of textiles, coated textiles and plastics coverings . 5 4.3 !Initial stability“ . 5 4.4 Construction . 5 4.4.1 General . 5 4.4.2 Hol

20、es, gaps and openings on the inside of the cot 6 4.4.3 Head entrapment on the outside of the cot . 7 4.4.4 Shear and squeeze points . 7 4.4.5 Snag points 7 4.4.6 Locking systems 7 4.4.7 Cot base 8 4.4.8 Sides and ends . 8 4.4.9 Cot rim 9 4.5 Final stability 9 4.6 !Mattress size“ 9 5 Packaging . 9 6

21、Instructions for use 10 7 Marking . 11 Annex A (informative) !Adeviations“. 12 BS EN 716-1:2008+A1:2013EN 716-1:2008+A1:2013 (E)EN 716-1:2008+A1:2013 (E) 3 Foreword This document (EN 716-1:2008+A1:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held

22、 by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that som

23、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 716-1:2008.“ This document includes Amendment 1 approved by CEN on 17 November 2012 The start and finis

24、h of text introduced or altered by amendment is indicated in the text by tags !“. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

25、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 71

26、6-1:2008+A1:2013 (E) 3 Foreword This document (EN 716-1:2008+A1:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by en

27、dorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identify

28、ing any or all such patent rights. This document supersedes !EN 716-1:2008.“ This document includes Amendment 1 approved by CEN on 17 November 2012 The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. According to the CEN/CENELEC Internal Regulations,

29、the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi land, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latv

30、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Avenue Marnix, 17 B-1000 Bruxelles Tel : +32 2 550 08 11 Fax : +32 2 550 08 19 Form - DEL/FO004/Issue 1 Reference: EN 716:2008+A1:2013 Titl

31、e: Furniture - Childrens cots and folding cots for domestic use - Part 1: Safety requirements Work Item: 00207237 Brussels, 2013-03-20 With reference to the above, please include the following minor editorial correction(s) in the document related to: the following language version(s) : English Frenc

32、h German for the following procedure : Publication FJD It has been brought to our attention that this document, issued on 2013-01-09 (CEN Standards Publications Weekly Output Reference 2013/01/I) requires modification. Please find enclosed the updated English version. We apologise for any inconvenie

33、nce this may cause. Correction Notice CEN Correction Notice 20 March 2013The CEN Correction Notice 20 March 2013 provided a revised English language text, incorporating the following editorial corrections:BS EN 716-1:2008+A1:2013EN 716-1:2008+A1:2013 (E)EN 716-1:2008+A1:2013 (E) 4 1 Scope This part

34、of EN 716 specifies safety requirements for childrens cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm. The requirements apply to a cot that is fully assembled and ready for use. Cots that can be converted into other items e.g. changing units, playpens sho

35、uld, when converted, comply with the relevant European standard for that item. This standard does not apply to carry cots, cribs and cradles for which a separate European standard exists. 2 Normative references The following referenced documents are indispensable for the application of this document

36、. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1, Safety of toys Part 1: Mechanical and physical properties EN 71-2:2006, Safety of toys Part 2: Flammability EN 71-3, Safety of to

37、ys Part 3: Migration of certain elements !EN 716-2:2008+A1:2013“, Childrens cots and folding cots for domestic use Part 2: Test methods EN 1103, Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour 3 Terms and definitions For the purposes of this European Standard,

38、the following terms and definitions apply. 3.1 folding cot cot which can be dismantled or folded without the use of a tool for transportation. This does not include items such as carry cots intended for transportation of infants NOTE In some countries “folding cots“ are also called “travel cots“. 3.

39、2 locking system mechanism consisting of a locking device and one or more operating devices, which can deactivate the locking device, e.g. by pushing a button, pressing a lever or turning a knob 3.3 locking device device intended to maintain the cot or parts of it in its intended position 3.4 shear

40、and squeeze points gaps which can cause harm to parts of the body and which occur when two accessible parts move relative to each other BS EN 716-1:2008+A1:2013EN 716-1:2008+A1:2013 (E)EN 716-1:2008+A1:2013 (E) 5 3.5 accessible parts !when a childs hand can neither reach through sides nor ends, the

41、inside of the cot and the exterior of the cot 300 mm from the upper part of the rim when a childs hand can reach through sides or ends, accessible parts are the whole cot except the underside of the cot base“ 3.6 mattress base cot base and mattress combined in one component 3.7 movable sides sliding

42、 sides, drop sides, folding sides, etc 4 Safety requirements 4.1 General With the exception of the requirements specified in clause 4.2, the requirements apply both before and after testing in accordance with !EN 716-2:2008+A1:2013“. 4.2 Materials 4.2.1 Materials and surfaces The manufacturer/import

43、er/retailer shall provide verification that all accessible parts meet the relevant requirements from EN 71-3. 4.2.2 Flammability of textiles, coated textiles and plastics coverings When tested in accordance with 5.4 of EN 71-2:2006, the maximum rate of spread of flame of textiles, coated textiles or

44、 plastic coverings shall be 30 mm/s. When tested in accordance with EN 1103, there shall be no flash-effect. ! 4.3 Initial stability When tested in accordance with 5.2 of EN 716-2:2008+A1:2013, the cot shall not overturn.“ 4.4 Construction 4.4.1 General 4.4.1.1 Edges and protruding parts Edges and p

45、rotruding parts accessible during normal use shall be rounded or chamfered and free of burrs and sharp edges. BS EN 716-1:2008+A1:2013EN 716-1:2008+A1:2013 (E)EN 716-1:2008+A1:2013 (E) 6 4.4.1.2 Self-tapping screws Self-tapping screws shall not be used to fasten any component that is designed to be

46、removed or loosened when dismantling the cot for purposes of transportation or storage. NOTE Self-tapping screws include wood screws, particleboard screws and the like. 4.4.1.3 Labels and decals !Glued labels and decals shall not be used on the internal surfaces of cot sides and ends unless they are

47、 below the level of the cot base or mattress base.“ 4.4.1.4 Small parts When tested in accordance with !5.5“ of !EN 716-2:2008+A1:2013“, no accessible part that can be detached shall fit wholly within the small parts cylinder. 4.4.1.5 Castors and wheels Castors/wheels shall not be fitted except in t

48、he following configuration, either: a) two or more castors/wheels and at least two other support points, or, b) at least four castors/wheels, of which at least two can be locked. 4.4.2 Holes, gaps and openings on the inside of the cot 4.4.2.1 General With the exception of the holes, gaps and opening

49、s specified in !4.4.2.2, 4.4.2.3, 4.4.2.4, 4.4.2.5, 4.4.2.6, 4.4.4.2 and 4.4.4.3“ all other accessible holes, gaps and openings shall be less than 7 mm, between 12 mm and 25 mm, or between 45 mm and 65 mm when tested in accordance with !5.4.1“ of !EN 716-2:2008+A1:2013“. 4.4.2.2 Assembly holes There shall be no accessible holes between 7 mm diameter and 12 mm diameter, unless the depth is less than 10 mm. 4.4.2.