EN 71-3-2013 en Safety of toys - Part 3 Migration of certain elements (Incorporates Amendment A2 2017)《玩具安全 第3部分 某种元素的迁移》.pdf

《EN 71-3-2013 en Safety of toys - Part 3 Migration of certain elements (Incorporates Amendment A2 2017)《玩具安全 第3部分 某种元素的迁移》.pdf》由会员分享，可在线阅读，更多相关《EN 71-3-2013 en Safety of toys - Part 3 Migration of certain elements (Incorporates Amendment A2 2017)《玩具安全 第3部分 某种元素的迁移》.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 71-3:2013 Incorporating corrigendum July 2013BS EN 71-3:2013Safety of toysPart 3: Migration of certain elementsBS EN 71-3:2013+A1:2014Incorporating corrigenda July 2013 and October 2014BS EN 71-3:2013+A1:2014 BRITISH STANDARDNational forewordThis British Standard is th

2、e UK implementation of EN 71-3:2013+A1:2014. It supersedes BS EN 71-3:2013, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN

3、 amendment A1 is indicated by .BSI, as a member of CEN, is obliged to publish BS EN 71-3:2013+A1:2014 as a British Standard. However, attention is drawn to the fact that during the development of this amendment, the UK committee voted against its approval as a European Standard. CEN amendment A1:201

4、4 amends requirements for the control of pH during sample preparation. The amended test method necessitates the precise measurement of pH in low volumes of solution and without losses of liquid or solid particles. Experience has shown that pH adjustment during the extraction stage of the method is n

5、ot necessary for many common toy materials such as plastic, metal, textile fibres and most woods. The UK committee, CW/15, is of the opinion that the new requirements for pH control are superfluous in most cases and introduce further measurement uncertainties which may be more significant than those

6、 which the amendment attempts to address. These matters will be taken up during the planned future revision of EN 71-3. The UK participation in its preparation was entrusted to Technical Committee CW/15, Safety of toys.A list of organizations represented on this committee can be obtained on request

7、to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 85283 1ICS 97.200.50Compliance with a British Sta

8、ndard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2013.Amendments/corrigenda issued since publicationDate Text affected31 July 2013 Implementation of corrigendum July 2013: Additional

9、National Foreword text31 October 2014 Implementation of CEN amendment A1:201431 October 2014 Implementation of corrigendum October 2014: Additional National Foreword text for A1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 71-3:2013+A1 October 2014 ICS 97.200.50 Supersedes EN 71-3:2013English

10、 Version Safety of toys - Part 3: Migration of certain elements Scurit des jouets - Partie 3: Migration de certains lments Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente This European Standard was approved by CEN on 29 May 2013 and includes Amendment 1 approved by CEN on 18 August

11、2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine

12、d on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-C

13、ENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I

14、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: A

15、venue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 71-3:2013+A1:2014 EEN 71-3:2013+A1:2014 (E) 2 Contents Page Foreword 5 Introduction .7 1 Scope 8 2 Normative references 8 3 Terms and definitions

16、 .8 4 Requirements .9 4.1 Toy material categories (see H.4).9 4.2 Specific requirements 10 5 Principle . 11 6 Reagents and apparatus 11 6.1 Reagents 11 6.2 Apparatus 12 7 Sampling and sample preparation 12 7.1 Selection of test portions . 12 7.2 Standards preparation . 13 7.3 Sample preparation 13 7

17、.3.1 General . 13 7.3.2 Category I: Dry, brittle, powder like or pliable and Category II: Liquid or sticky . 13 7.3.3 Category III: Scraped-off 13 7.4 Migration procedure . 15 7.4.1 General . 15 7.4.2 Category I: Dry, brittle, powder like or pliable and Category II: Liquid or sticky . 15 7.4.3 Categ

18、ory III: Scraped-off 16 8 Methods of analysis . 17 9 Calculation of results . 18 9.1 General elements 18 9.1.1 Calibration curve. 18 9.1.2 Calculation of migration . 18 9.1.3 Interpretation of results . 18 9.2 Chromium (III) and Chromium (VI) 18 9.2.1 Calibration curve. 18 9.2.2 Calculation of migra

19、tion . 19 9.2.3 Interpretation of results . 19 9.3 Organic tin . 19 9.3.1 Calibration curves. 19 9.3.2 Calculation of migration of single organic tin compound 19 9.3.3 Calculation of migration of organic tin . 20 9.3.4 Interpretation of results . 20 10 Test report . 20 Annex A (informative) Signific

20、ant technical changes between this European Standard and the previous version . 22 Annex B (informative) Method performance . 24 B.1 Method performance 24 B.2 Use of measurement uncertainty in compliance assessment . 24 BS EN 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013+A1:2014 (E) 2 Conten

21、ts Page Foreword 5 Introduction .7 1 Scope 8 2 Normative references 8 3 Terms and definitions .8 4 Requirements .9 4.1 Toy material categories (see H.4).9 4.2 Specific requirements 10 5 Principle . 11 6 Reagents and apparatus 11 6.1 Reagents 11 6.2 Apparatus 12 7 Sampling and sample preparation 12 7

22、.1 Selection of test portions . 12 7.2 Standards preparation . 13 7.3 Sample preparation 13 7.3.1 General . 13 7.3.2 Category I: Dry, brittle, powder like or pliable and Category II: Liquid or sticky . 13 7.3.3 Category III: Scraped-off 13 7.4 Migration procedure . 15 7.4.1 General . 15 7.4.2 Catego

23、ry I: Dry, brittle, powder like or pliable and Category II: Liquid or sticky . 15 7.4.3 Category III: Scraped-off 16 8 Methods of analysis . 17 9 Calculation of results . 18 9.1 General elements 18 9.1.1 Calibration curve. 18 9.1.2 Calculation of migration . 18 9.1.3 Interpretation of results . 18 9

24、.2 Chromium (III) and Chromium (VI) 18 9.2.1 Calibration curve. 18 9.2.2 Calculation of migration . 19 9.2.3 Interpretation of results . 19 9.3 Organic tin . 19 9.3.1 Calibration curves. 19 9.3.2 Calculation of migration of single organic tin compound 19 9.3.3 Calculation of migration of organic tin

25、 . 20 9.3.4 Interpretation of results . 20 10 Test report . 20 Annex A (informative) Significant technical changes between this European Standard and the previous version . 22 Annex B (informative) Method performance . 24 B.1 Method performance 24 B.2 Use of measurement uncertainty in compliance ass

26、essment . 24 EN 71-3:2013+A1:2014 (E) 3 B.3 Information on round robin test . 24 Annex C (normative) Sieve requirements 26 Annex D (informative) Preparation and analysis of test portion 27 Annex E (informative) Method of analysis for general elements . 28 E.1 Principle 28 E.2 Working solutions . 28

27、E.2.1 Working solutions ICP-MS 28 E.2.2 Working solutions ICP-OES . 29 E.3 Procedure . 30 E.4 Analysis 30 E.4.1 General . 30 E.4.2 Limit of detection and quantification 31 Annex F (informative) Methods of analysis for speciation of Chromium (III) and (VI) . 33 F.1 Principle 33 F.2 Reagents. 33 F.3 A

28、pparatus . 34 F.4 Procedure . 34 F.5 Analysis 35 F.5.1 General . 35 F.5.2 LC-ICP-MS conditions . 35 F.5.3 Limit of detection and quantification 36 Annex G (informative) Method of analysis for organic tin (see H.10) 38 G.1 Principle 38 G.2 Terms and definitions . 39 G.3 Reagents. 39 G.4 Apparatus . 4

29、1 G.5 Procedure . 42 G.5.1 Sample derivatisation . 42 G.5.2 Calibration standards 42 G.6 Analysis 42 G.6.1 General . 42 G.6.2 Example of GC conditions 43 G.6.3 Example of MS conditions 43 G.6.4 Limit of detection and quantification 43 G.6.5 Example of a GC/MS chromatogram . 44 Annex H (informative)

30、Rationale 45 H.1 General . 45 H.2 Mouthing behaviour of children (Scope) 45 BS EN 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013+A1:2014 (E) 4 H.3 Skin contact (Scope) 45 H.4 Toy categories (4.1) 46 H.5 Test portions (7.1, 7.3.3.2, 7.3.3.3, 7.3.3.6) . 46 H.6 Size of test pieces (7.3.3.2, 7.3.

31、3.3, 7.3.3.4) 46 H.7 Textile threads . 46 H.8 Chromium (VI) migration (7.4) . 46 H.9 Filtration of migration solutions (7.4.2.1, 7.4.2.2, 7.4.3.1, 7.4.3.3, 7.4.3.5) . 47 H.10 Organic tin (9.3) . 47 H.11 pH value . 47 H.12 De-waxing (see 7.3.2) . 48 Annex I (informative) Conformity assessment 49 I.1

32、General . 49 I.2 Chromium VI 49 Annex J (informative) List of other organic tin compounds 50 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/48/EC . 51 Bibliography . 52 BS EN 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013

33、+A1:2014 (E) 4 H.3 Skin contact (Scope) 45 H.4 Toy categories (4.1) 46 H.5 Test portions (7.1, 7.3.3.2, 7.3.3.3, 7.3.3.6) . 46 H.6 Size of test pieces (7.3.3.2, 7.3.3.3, 7.3.3.4) 46 H.7 Textile threads . 46 H.8 Chromium (VI) migration (7.4) . 46 H.9 Filtration of migration solutions (7.4.2.1, 7.4.2.

34、2, 7.4.3.1, 7.4.3.3, 7.4.3.5) . 47 H.10 Organic tin (9.3) . 47 H.11 pH value . 47 H.12 De-waxing (see 7.3.2) . 48 Annex I (informative) Conformity assessment 49 I.1 General . 49 I.2 Chromium VI 49 Annex J (informative) List of other organic tin compounds 50 Annex ZA (informative) Relationship betwee

35、n this European Standard and the Essential Requirements of EU Directive 2009/48/EC . 51 Bibliography . 52 EN 71-3:2013+A1:2014 (E) 5 Foreword This document (EN 71-3:2013+A1:2014) has been prepared by Technical Committee CEN/TC 52 “Safety of toys”, the secretariat of which is held by DS. This Europea

36、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015, and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements o

37、f this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 71-3:2013“. This document includes Amendment 1 approved by CEN on 2014-08-18. The start and finish of text introduced or a

38、ltered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2009/48/EC. For relationship with EU Directive 2009/48/EC, see

39、 informative Annex ZA, which is an integral part of this document. The significant changes from the previous edition of this standard are detailed in Annex A. EN 71, Safety of toys, consists of the following parts: Part 1: Mechanical and physical properties; Part 2: Flammability; Part 3: Migration o

40、f certain elements; Part 4: Experimental sets for chemistry and related activities; Part 5: Chemical toys (sets) other than experimental sets; Part 7: Finger paints Requirements and test methods; Part 8: Activity toys for domestic use; Part 9: Organic chemical compounds Requirements; Part 10: Organi

41、c chemical compounds Sample preparation and extraction; Part 11: Organic chemical compounds Methods of analysis; Part 12: N-Nitrosamines and N-nitrosatable substances; Part 13: Olfactory board games, gustative board games, cosmetic kits and gustative kits; Part 14: Trampolines for domestic use. BS E

42、N 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013+A1:2014 (E) 6 NOTE 1 In addition to the above parts of EN 71, the following guidance documents have been published: CEN Report, CR 14379, Classification of toys Guidelines, CEN Technical Report CEN/TR 15071, Safety of toys National translations

43、 of warnings and instructions for use in EN 71, and CEN Technical Report CEN/TR 15371, Safety of toys Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8. NOTE 2 Words in italics are defined in Clause 3 (Terms and definitions). According to the CEN-CENELEC Internal Regulations, t

44、he national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

45、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013+A1:2014 (E) 6 NOTE 1 In addition to the above parts of EN 71, the following gui

46、dance documents have been published: CEN Report, CR 14379, Classification of toys Guidelines, CEN Technical Report CEN/TR 15071, Safety of toys National translations of warnings and instructions for use in EN 71, and CEN Technical Report CEN/TR 15371, Safety of toys Replies to requests for interpret

47、ation of EN 71-1, EN 71-2, and EN 71-8. NOTE 2 Words in italics are defined in Clause 3 (Terms and definitions). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgari

48、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke

49、y and the United Kingdom. EN 71-3:2013+A1:2014 (E) 7 Introduction The Toy Safety Directive (2009/48/EC) 1 specifies maximum migration limits for three categories of toy materials. The limits for the migration of certain elements are expressed in milligram per kilogram toy material and are detailed in Table 2. The purpose of the limits is to minimise childrens exposure to certain potentially toxic elements. BS EN 71-3:2013+A1:2014EN 71-3:2013+A1:2014 (E)EN 71-3:2013+A1:2014 (E) 8 1 Scope This European Standard specifies requireme