EN 474-10-2006 en Earth-moving machinery - Safety - Part 10 Requirements for trenchers (Incorporates Amendment A1 2009)《土方机械 安全 第10部分 挖沟机的要求 包含修改件A1-2009》.pdf

《EN 474-10-2006 en Earth-moving machinery - Safety - Part 10 Requirements for trenchers (Incorporates Amendment A1 2009)《土方机械 安全 第10部分 挖沟机的要求 包含修改件A1-2009》.pdf》由会员分享，可在线阅读，更多相关《EN 474-10-2006 en Earth-moving machinery - Safety - Part 10 Requirements for trenchers (Incorporates Amendment A1 2009)《土方机械 安全 第10部分 挖沟机的要求 包含修改件A1-2009》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN Earth-moving machinery Safety Part 10: Requirements for trenchersICS 53.100g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58474

2、-10:2006+A1:2009BS EN 474-10:2006+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2009ISBN 978 0 580 62374 5National forewordThis British Standard is the UK implementation of EN 474-10:2006+A1:2009. It supersedes B

3、S EN 474-10:2006, which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/513/1, Earth moving machinery (International).A list of organizations represented on this subcommittee can be

4、obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publica

5、tionDate CommentsThe start and finish of text introduced or altered by amendment is indicatedin the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . A1A1May 2009 Implementation of CEN amendment A1

6、:200931 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 474-10:2006+A1 February 2009 ICS 53.100 Supersedes EN 474-10:2006English Version Earth-moving machinery - Safety - Part 10: Requirements for trenchers Engins de terrassement - Scurit - Partie 10: Prescriptions applicables aux trancheuses E

7、rdbaumaschinen - Sicherheit - Teil 10: Anforderungen fr Grabenfrsen This European Standard was approved by CEN on 17 April 2006 and includes Amendment 1 approved by CEN on 20 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g

8、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official

9、versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Bel

10、gium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FO

11、R STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 474-10:2006+A1:2009: EEN 474-10:2006+A1:2009

12、(E) 2 Contents Page Foreword 3Introduction .51 Scope 62 Normative references 63 Terms and definitions .74 List of additional significant hazards 75 Safety requirements and/or measures 75.1 General 75.2 Ride-on operated trenchers 75.3 Protective bar .95.4 Pedestrian-controlled trenchers 95.5 Noise 10

13、6 Information for use . 10Annex A (normative) List of additional significant hazards Trenchers . 11Annex B (informative) Illustrations . 12Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 14Annex ZB (informative) !Relationsh

14、ip between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 15Bibliography . 16Figures Figure B.1 Wheel trencher (ride on) 12 Figure B.2 Wheel trencher (pedestrian controlled) . 12 Figure B.3 Crawler trencher (ride on) 13 Figure B.4 Crawler trencher with elevating op

15、erators station 13 Tables Table A.1 List of additional significant hazards . 11 EN 474-10:2006+A1:2009 (E) 3 Foreword This document (EN 474-10:2006+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is

16、 held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1,

17、 approved by CEN on 2008-12-20. This document supersedes !EN 474-10:2006“. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associa

18、tion, and supports essential requirements of EU Directive. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ For bibliographic references, see !EN 474-1:2006+A1:2009“. EN 474 “Earth-moving machinery Safety“ comprises the following

19、parts: Part 1: General requirements Part 2: Requirements for tractor-dozers Part 3: Requirements for loaders Part 4: Requirements for backhoe-loaders Part 5: Requirements for hydraulic excavators Part 6: Requirements for dumpers Part 7: Requirements for scrapers Part 8: Requirements for graders Part

20、 9: Requirements for pipelayers Part 10: Requirements for trenchers Part 11: Requirements for earth and landfill compactors Part 12: Requirements for cable excavators This European Standard is intended for use in combination with Part 1 of the series. According to the CEN/CENELEC Internal Regulation

21、s, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, EN 474-10:2006+A1:2009 (E) 4 Lithuania,

22、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 474-10:2006+A1:2009 (E) 5 Introduction This part of EN 474 is a type C standard as stated in EN ISO 12100-1:2003. The machinery concerned and the extent to which h

23、azards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the othe

24、r standards, for machines that have been designed and built according to the provisions of this type C standard. EN 474-10:2006+A1:2009 (E) 6 1 Scope This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in EN ISO 6165:2006, when the

25、y are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in !EN 474-1:2006+A1:2009“. This part does not deal with the specific hazards related to de

26、rivative use. This part does not repeat the requirements from !EN 474-1:2006+A1:2009“, but adds or replaces the requirements for application for trenchers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations a

27、nd events during commissioning, operation and maintenance of trenchers. This European Standard is not applicable to trenchers manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application

28、of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !EN 474-1:2006+A1:2009“, Earth-moving machinery Safety Part 1: General requirements !deleted text“ !EN ISO 3411:2

29、007, Earth-moving machinery Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)“ !EN ISO 3471:2008, Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)“ !EN ISO 6682:2008, Earth-moving machinery Zon

30、es of comfort and reach for controls (ISO 6682:1986 including Amendment 1:1989) “ !EN ISO 7096:2008“, Earth-moving machinery Laboratory evaluation of operator seat vibration (ISO 7096:2000) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminolo

31、gy, methodology (ISO 12100-1:2003) !ISO 6016:2008“, Earth-moving machinery Methods of measuring the masses of whole machines, their equipment and components !ISO 6393:2008, Earth-moving machinery - Determination of sound power level - Stationary test conditions“ !ISO 6394:2008“, Earth-moving machine

32、ry Determination of emission sound pressure level at operators position Stationary test conditions ISO 12509:2004, Earth-moving machinery Lighting, signalling and marking lights, and reflex-reflector devices EN 474-10:2006+A1:2009 (E) 7 ISO 17063:2003, Earth-moving machinery Braking systems of pedes

33、trian-controlled machines Performance requirements and test procedures 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in !EN 474-1:2006+A1:2009“ and EN ISO 12100-1:2003 and the following apply. NOTE 1 Terminology for trenchers is specified in ISO

34、13539:1998 and illustrated in Annex B of this European Standard. NOTE 2 Definitions used in EN and ISO standards referred to in this European Standard are also valid for this document. 3.1 trencher self-propelled crawler or wheeled machine, having a rear- and/or front-mounted equipment/attachment, p

35、rimarily designed to produce a trench in a continuous operation, through a motion of the machine; the attachment can be a digging chain, wheel disk, plough blade or similar tool (see EN ISO 6165:2006) 3.2 protective bar structure generally above and parallel to the digging chain which provides a deg

36、ree of protection from contact with the digging element (see figures in Annex B) 3.3 trench narrow horizontal excavation for which, in general, the depth is greater than the width 4 List of additional significant hazards See Annex A. NOTE Annex A (normative) contains all the significant hazards, haz

37、ardous situations and events, as far as they are dealt with in this European Standard, identified by risk assessment as significant for this type of machinery and which require action to eliminate or reduce the risk. 5 Safety requirements and/or measures 5.1 General Trenchers shall comply with the r

38、equirements of !EN 474-1:2006+A1:2009“, as far as not modified or replaced by the requirements of this part. 5.2 Ride-on operated trenchers 5.2.1 Operators station For minimum space envelope !EN 474-1:2006+A1:2009“, 5.3.1 applies with the exception that, for trenchers with an operating mass accordin

39、g to !ISO 6016:2008“ of less than 2 000 kg, the minimum space envelope width dimension 920 mm according to !EN ISO 3411:2007“, Figure 5 may be reduced to 650 mm at elbow height. EN 474-10:2006+A1:2009 (E) 8 5.2.2 Roll-over protective structure (ROPS) A roll-over protective structure (ROPS) shall be

40、fitted. Force and energy equation shall be according to Table 1, no. 3 of !EN ISO 3471:2008“. The operators station of trenchers with an elevating operators station shall meet the requirements of !EN 474- 1:2006+A1:2009“, Annex D. 5.2.3 Operators seat 5.2.3.1 General !EN 474-1:2006+A1:2009“, 5.4.1.2

41、 applies with the exceptions in 5.2.3.2 and 5.2.3.3. 5.2.3.2 Adjustment 5.2.3.2.1 Seat with a longitudinal position For machines with an operating mass according to !ISO 6016:2008“ 3 500 kg the adjustment range shall comply with !EN 474-1:2006+A1:2009“, 5.4.1.3 for compact machines. 5.2.3.2.2 Seat w

42、ith a transversal position Fore and aft adjustment is not required. 5.2.3.2.3 Vibration !EN 474-1:2006+A1:2009“, 5.4.1.4 applies with the following addition that the seat shall comply with !EN ISO 7096:2008“, input spectral class EM 6. 5.2.3.3 Additional/separate operators station If a separate oper

43、ators station is required for control of special attachment, the following exceptions apply to this separate operators station a separate cab is not required (!EN 474-1:2006+A1:2009“, 5.3.1 does not apply); a roll-over protective structure is not required (!EN 474-1:2006+A1:2009“, 5.3.3 does not app

44、ly); falling object protective structures are not required (!EN 474-1:2006+A1:2009“, 5.3.4 does not apply). 5.2.4 Operators controls 5.2.4.1 General !EN 474-1:2006+A1:2009“, 5.5.1 applies with the additions in 5.2.4.2 and 5.2.4.3. 5.2.4.2 Engine stop If a separate seat for special attachment is prov

45、ided (e. g. backhoe equipment) an additional engine stopping device shall be fitted if the normal stopping device is not within the zone of reach according to !EN ISO 6682:2008“ from the separate seat. 5.2.4.3 Deactivation device !EN 474-1:2006+A1:2009“, 5.5.3 applies with the addition that the deac

46、tivation device shall stop machine travel and attachment movement when the operator leaves the operators station. EN 474-10:2006+A1:2009 (E) 9 5.2.5 Stability !EN 474-1:2006+A1:2009“, 5.11 applies with the exception that for backhoe equipment on trenchers the second paragraph of 5.11 does not apply.

47、 5.3 Protective bar !EN 474-1:2006+A1:2009“, 5.14.3 applies with the provision that a protective bar as defined in 3.2 shall be fitted over the top on the whole length of the trenching attachment. A restraint bar or trench cleaner bar as shown in ISO 13539:1998 satisfy this requirement. 5.4 Pedestri

48、an-controlled trenchers 5.4.1 Operators station !EN 474-1:2006+A1:2009“, 5.3.1.1, 5.3.1.2 and 5.3.1.6 do not apply for pedestrian-controlled machines. 5.4.2 Controls 5.4.2.1 General !EN 474-1:2006+A1:2009“, 5.5 applies with the additions in 5.4.2.2 and 5.4.2.3. 5.4.2.2 Automatic stop Pedestrian cont

49、rolled trenchers shall be equipped with a hold-to-run device to stop machine travel and hazardous tool movement if the operator releases the operators controls. Design of the controls shall take into account the hazards from inadvertent movement of the machine towards the operator. 5.4.2.3 Speed limit The forward speed of pedestrian controlled machines shall not exceed 6 km/h by design. The speed for travelling towards the operators