EN 4652-002-2017 en Aerospace series - Connectors coaxial radiofrequency - Part 002 Specification of performances.pdf

《EN 4652-002-2017 en Aerospace series - Connectors coaxial radiofrequency - Part 002 Specification of performances.pdf》由会员分享，可在线阅读，更多相关《EN 4652-002-2017 en Aerospace series - Connectors coaxial radiofrequency - Part 002 Specification of performances.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Aerospace series - Connectors, coaxial, radiofrequencyPart 002: Specification of performancesBS EN 4652-002:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4652-002 November 2017 ICS 49.060 English Version Aero

2、space series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances Srie arospatiale - Connecteurs coaxiaux pour radio frquences - Partie 002 : Spcification de performancesLuft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 002: Leistungsdaten This European Sta

3、ndard was approved by CEN on 28 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

4、 such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

5、 own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German

6、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI

7、TEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4652-002:2017 ENational forewordThis British Standard is the UK implementation of EN 4652-002:2017

8、.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessar

9、y provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 98579 9ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ

10、ished under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 4652-002:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4652-002 November 2017 ICS 49.060 English Version Aeros

11、pace series - Connectors, coaxial, radiofrequency - Part 002: Specification of performances Srie arospatiale - Connecteurs coaxiaux pour radio frquences - Partie 002 : Spcification de performancesLuft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 002: Leistungsdaten This European Stan

12、dard was approved by CEN on 28 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

13、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

14、own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany

15、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMIT

16、EE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4652-002:2017 EBS EN 4652-002:2017EN 4652-002:2017 (E) 2 Contents Page European foreword 3 1 Scope

17、4 2 Normative references 4 3 List of product standards . 4 4 Required characteristics 5 5 Technical specification . 6 BS EN 4652-002:2017EN 4652-002:2017 (E) 3 European foreword This document (EN 4652-002:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standar

18、dization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall b

19、e given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be

20、 the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Be

21、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swed

22、en, Switzerland, Turkey and the United Kingdom. BS EN 4652-002:2017EN 4652-002:2017 (E) 4 1 Scope This European Standard specifies the list of product standards and common characteristics of connectors coaxial radio frequency for use in electrical systems of aircraft. 2 Normative references The foll

23、owing documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 46

24、52-001, Aerospace series Connectors, coaxial, radio frequency Part 001: Technical specification 3 List of product standards EN 4652-110, Aerospace series Connectors, coaxial, radio frequency Part 110: Type 1, BNC interface Clamp nut assembly version Straight plug Product standard EN 4652-111, Aerosp

25、ace series Connectors, coaxial, radio frequency Part 111: Type 1, BNC interface Clamp nut assembly version Right angle plug Product standard EN 4652-112, Aerospace series Connectors, coaxial, radio frequency Part 112: Type 1, BNC interface Clamp nut assembly version Square flange receptacle Product

26、standard EN 4652-113, Aerospace series Connectors, coaxial, radio frequency Part 113: Type 1, BNC interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-210, Aerospace series Connectors, coaxial, radio frequency Part 210: Type 2, TNC interface Clamp nut assembly version St

27、raight plug Product standard EN 4652-211, Aerospace series Connectors, coaxial, radio frequency Part 211: Type 2, TNC interface Clamp nut assembly version Right angle plug Product standard EN 4652-212, Aerospace series Connectors, coaxial, radio frequency Part 212: Type 2, TNC interface Clamp nut as

28、sembly version Square flange receptacle Product standard EN 4652-213, Aerospace series Connectors, coaxial, radio frequency Part 213: Type 2, TNC interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-220, Aerospace series Connectors, coaxial, radio frequency Part 220: Typ

29、e 2, TNC interface Crimp version Straight plug Product standard EN 4652-221, Aerospace series Connectors, coaxial, radio frequency Part 221: Type 2, TNC interface Crimp version Right angle plug Product standard EN 4652-222, Aerospace series Connectors, coaxial, radio frequency Part 222: Type 2, TNC

30、interface Crimp version Square flange receptacle Product standard EN 4652-310, Aerospace series Connectors, coaxial, radio frequency Part 310: Type 3, N interface Clamp nut assembly version Straight plug Product standard BS EN 4652-002:2017EN 4652-002:2017 (E) 5 EN 4652-311, Aerospace series Connect

31、ors, coaxial, radio frequency Part 311: Type 3, N interface Clamp nut assembly version Right angle plug Product standard EN 4652-312, Aerospace series Connectors, coaxial, radio frequency Part 312: Type 3, N interface Clamp nut assembly version Square flange receptacle Product standard EN 4652-313,

32、Aerospace series Connectors, coaxial, radio frequency Part 313: Type 3, N interface Clamp nut assembly version Bulkhead receptacle Product standard EN 4652-320, Aerospace series Connectors, coaxial, radio frequency Part 320: Type 3, N interface Crimp version Straight plug Product standard EN 4652-32

33、1, Aerospace series Connectors, coaxial, radio frequency Part 321: Type 3, N interface Crimp assembly version Right angle plug Product standard EN 4652-322, Aerospace series Connectors, coaxial, radio frequency Part 322: Type 3, N interface Crimp version Square flange receptacle Product standard EN

34、4652-410, Aerospace series Connectors, coaxial, radio frequency Part 410: Type 4, C interface Clamp nut assembly version Straight plug Product standard EN 4652-411, Aerospace series Connectors, coaxial, radio frequency Part 411: Type 4, C interface Clamp nut assembly version Right angle plug Product

35、 standard EN 4652-412, Aerospace series Connectors, coaxial, radio frequency Part 412: Type 4, C interface Clamp nut assembly version Square flange receptacle Product standard EN 4652-413, Aerospace series Connectors, coaxial, radio frequency Part 413: Type 4, C interface Clamp nut assembly version

36、Bulkhead receptacle Product standard EN 4652-420, Aerospace series Connectors, coaxial, radio frequency Part 420: Type 4, C interface Crimp assembly version Straight plug Product standard EN 4652-421, Aerospace series Connectors, coaxial, radio frequency Part 421: Type 4, C interface Crimp assembly

37、version Right angle plug Product standard 4 Required characteristics 4.1 Configuration, dimension and mass See product standard. 4.2 Material and finish See product standard. 4.3 Temperature Operating temperature shall be between 65 C and 165 C. 4.4 Electrical characteristics See product standard. B

38、S EN 4652-002:2017EN 4652-002:2017 (E) 6 4.5 General characteristics Tightening torque of cap shall be in accordance with product standard. 4.6 Delivery condition At the time of delivery and during storage the connectors must be equipped with a plastic cap for contact protection. 4.6.1 Tool and stri

39、pping lengths See product standard. 4.6.2 Admissible cables See product standard. 5 Technical specification See EN 4652-001. BS EN 4652-002:2017This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information

40、and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experie

41、nce and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Informa

42、tion on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, in

43、cluding British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in B

44、SI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for com

45、mercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs pr

46、ior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the

47、sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be fu

48、rther reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to bsigroup.