EN 4644-021-2015 en Aerospace series - Connector electrical and optical rect angul ar modul ar rect angul ar i nserts oper ati ng temperature 175 (or 125 continuous - Part 021 Plug.pdf

《EN 4644-021-2015 en Aerospace series - Connector electrical and optical rect angul ar modul ar rect angul ar i nserts oper ati ng temperature 175 (or 125 continuous - Part 021 Plug.pdf》由会员分享，可在线阅读，更多相关《EN 4644-021-2015 en Aerospace series - Connector electrical and optical rect angul ar modul ar rect angul ar i nserts oper ati ng temperature 175 (or 125 continuous - Part 021 Plug.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4644-021:2015Aerospace series Connector,electrical and optical,r e c t a n g u l a r , m o d u l a r ,r e c t a n g u l a r i n s e r t s , o p e r a t i n gtemperature 175 C (or 125 C)continuousPart 021: Plug, size 2, without mountingholes, class A, C and E Product st

2、andardBS EN 4644-021:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4644-021:2015.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented

3、on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89855 6I

4、CS 49.060; 49.090Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4

5、644-021:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4644-021 November 2015 ICS 49.060; 49.090 English Version Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous - Part 021: Plug, size 2, with

6、out mounting holes, class A, C and E - Product standard Srie arospatiale - Connecteur, lectrique et optique, rectangulaire, modulaire, inserts rectangulaires, temprature de fonctionnement 175 C (ou 125 C) continu - Partie 021 : Fiche, taille 2, sans trous de fixation, classes A, C et E - Norme de pr

7、oduit Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) konstant - Teil 021: Freier Steckverbinder, Gre 2, ohne Montagebohrungen, Klassen A, C und E - Produktnorm This European Standard was approved

8、by CEN on 30 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa

9、rds may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and not

10、ified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I

11、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Man

12、agement Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-021:2015 EBS EN 4644-021:2015EN 4644-021:2015 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3

13、Terms and definitions . 4 4 Required characteristics 5 5 Designation . 7 BS EN 4644-021:2015EN 4644-021:2015 (E) 3 European foreword This document (EN 4644-021:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and vote

14、s carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, ei

15、ther by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CEN

16、ELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repub

17、lic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN

18、 4644-021:2015EN 4644-021:2015 (E) 4 1 Scope This European Standard specifies the size 2 plug for disconnect applications used in the family of modular rectangular electrical and optical connector with rectangular inserts. The receptacle corresponding to this plug is defined in EN 4644-024 or EN 464

19、4-025 or EN 4644-026. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen

20、t (including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectan

21、gular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 002: Specification of performance and contact arrangements EN 4644-024, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) cont

22、inuous Part 024: Receptacle, size 2, class A, C and E Product standard EN 4644-025, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 025: Receptacle, size 2, with flange, class A, C and E Product stan

23、dard EN 4644-026, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 026: Receptacle, size 2, with ground block, class B and F Product standard 3 Terms and definitions For the purposes of this standard,

24、 the terms and definitions given in EN 4644-001 apply. BS EN 4644-021:2015EN 4644-021:2015 (E) 5 4 Required characteristics 4.1 Dimensions See Figure 1 and Figure 2. Key 1 See EN 4644-001. 2 Axis of 19,00 NOTE Ap, Bp, Cp axis, see EN 4644-001. Figure 1 BS EN 4644-021:2015EN 4644-021:2015 (E) 6 NOTE

25、Ap axis, see EN 4644-001. Figure 2 BS EN 4644-021:2015EN 4644-021:2015 (E) 7 4.2 Mass 40 g max. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, SIZE 2 PLUG Identity block EN 4644-021ABX Number of this standard Shell class (see EN 4644-002) Housing type: (see Figures 1 and 2) B: with no

26、 mounting holes Polarization code (see EN 4644-002) This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British

27、Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined exper

28、ience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Infor

29、mation on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications,

30、including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Subscription

31、sOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. It

32、s available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating servic

33、e exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to ho

34、st standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by a

35、mendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in al

36、l British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Exc

37、ept as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from

38、 the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW