EN 4372-2009 en Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D less than or equal to 10 mm《航空航天系列 耐热镍和铜NI-PD9001(NiCu31)合.pdf

《EN 4372-2009 en Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D less than or equal to 10 mm《航空航天系列 耐热镍和铜NI-PD9001(NiCu31)合.pdf》由会员分享，可在线阅读，更多相关《EN 4372-2009 en Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D less than or equal to 10 mm《航空航天系列 耐热镍和铜NI-PD9001(NiCu31)合.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 4372:2009Aerospace series Heat resisting nickelalloy with copper NIPD9001 (NiCu31) Wire for solid rivets D 10 mmICS 49.025.15BRITISH STANDARDNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWThis British Standard was published under the authority of the Standards Policy and

2、 Strategy Committee on 31 July2009. BSI 2009ISBN 978 0 580 67406 8Amendments/corrigenda issued since publicationDate CommentsBS EN 4372:2009National forewordThis British Standard is the UK implementation of EN 4372:2009. The UK participation in its preparation was entrusted to TechnicalCommittee ACE

3、/61/-/48, Heat resisting alloys.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standa

4、rd cannot confer immunityfrom legal obligations.BS EN 4372:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4372 February 2009 ICS 49.025.15 English Version Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D 10 mm Srie arospatiale - Alli

5、age de nickel corroy au cuivre rsistant chaud NI-PD9001 (NiCu31) - Fil pour rivets - D 10 mm Luft- und Raumfahrt - Hochwarmfeste Nickellegierung mit Kupfer NI-PD9001 (NiCu31) - Nietdrhte - D 10 mm This European Standard was approved by CEN on 11 July 2008. CEN members are bound to comply with the CE

6、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or

7、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official vers

8、ions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

9、pain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national

10、 Members. Ref. No. EN 4372:2009: EBS EN 4372:2009EN 4372:2009 (E) 2 Foreword This document (EN 4372:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Associati

11、on, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

12、at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any

13、 or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungar

14、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 4372:2009EN 4372:2009 (E) 3 Introduction This standard is part of the series of EN metallic material standard

15、s for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-3. 1 Scope This standard specifies the requirements relating to: Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) Wire for solid rivets

16、D 10 mm for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)

17、 applies. EN 2002-001, Aerospace series Metallic materials Test methods Part 001: Tensile testing at ambient temperature EN 2032-2, Aerospace series Metallic materials Part 2: Coding of metallurgical condition in delivery condition EN 4258, Aerospace series Metallic materials General organization of

18、 standardization Links between types of EN standards and their use EN 4500-3, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 3: Specific rules for heat resisting alloys 1) EN 4700-4, Aerospace series Steel and heat resisting alloys Wrought products

19、 Technical specification Part 4: Wire 1) ASTM B565, Standard test method for shear testing of aluminum and aluminum-alloy rivets and cold-heading wire and rods 2)1) Published as ASD Prestandard at the date of publication of this standard. 2) Published by: American Society for Testing and Materials (

20、ASTM), 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, USA. BS EN 4372:2009EN 4372:2009 (E) 4 1 Material designation Nickel alloy with copper NI-PD9001 (NiCu31) 2 Chemical composition % Element Ni+Co aAl C Cu Fe Mn S Si Others Ni Each Total min. 63 28 1 0,3 Base max. 0,5 0,15 3

21、4 2,5 2,0 0,024 0,5 0,60 b3 Method of melting 4.1 Form Wire 4.2 Method of production Cold drawn 4.3 Limit dimension(s) mm D 10 mm 5 Technical specification EN 4700-4 6.1 Delivery condition Recrystallized annealed 4 h, 780 C, furnace cool combined with gas quench to 50 C, subsequent air cool cHeat tr

22、eatment 6.2 Delivery condition code U d7 Use condition Delivery condition Heat treatment Characteristics 8.1 Test sample(s) EN 2002-001 8.2 Test piece(s) EN 2002-001 8.3 Heat treatment 9 Dimensions concerned mm D 10 mm 10 Thickness of cladding on each face % 11 Direction of test piece L 12 T Tempera

23、ture C Ambient 13 Proof stress Rp0,2MPa 14 Strength RmMPa 530 Rm 620 15 Elongation A % A50 mm 25 16 Reduction of area Z % 17 Hardness 18 Shear strength RcMPa 340 Rc e19 Bending k 20 Impact strength 21 C Temperature C 22 Time h 23 Stress aMPa 24 Elongation a % 25 Rupture stress RMPa 26 Elongation at

24、rupture A % 27 Notes (see line 98) a, b, c, d, eBS EN 4372:2009EN 4372:2009 (E) 5 36 Reverse torsion test for wires See EN 4700-4. 7 D 8 mm; 10 turns in each way 43 Wrapping test for wires See EN 4700-4. 44 External defects See EN 4700-4. 1 Only visual is required 7 No cracks, laps, folds 95 Marking

25、 inspection See EN 4700-4. 96 Dimensional inspection See EN 4700-4. 98 Notes a Mass content of max. 1,0 % Co is allowed. b (Zn, Sn, Pb), Ti 0,6 where (Zn, Sn, Pb) 0,3 Ti 0,3. c Tolerance according to EN 4700-4. d See EN 2032-2. e Testing of shear strength according to ASTM B565. 99 Typical use BS EN

26、 4372:2009EN 4372:2009 (E) 6 100 Product qualification Qualification programme to be agreed between manufacturer and purchaser. BS EN 4372:2009This page has been intentionally left blankBS EN4372:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8

27、996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. User

28、s of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of

29、 the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buyi

30、ng standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for intern

31、ational standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technica

32、l Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards development

33、sand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found a

34、t http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988

35、no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: