EN 4165-003-2016 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 003 Modules series 2 and series 3 - Product standard《.pdf

《EN 4165-003-2016 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 003 Modules series 2 and series 3 - Product standard《.pdf》由会员分享，可在线阅读，更多相关《EN 4165-003-2016 en Aerospace series - Connectors electrical rectangular modular - Operating temperature 175 continuous - Part 003 Modules series 2 and series 3 - Product standard《.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4165-003:2016Aerospace series Connectors, electrical,r e c t a n g u l a r , m o d u l a r Operating temperature 175 C continuousPart 003: Modules series 2 and series 3 Product standardBS EN 4165-003:2016 BRITISH STANDARDNational forewordThis British Standard is the UK

2、 implementation of EN 4165-003:2016. It supersedes BS EN 4165-003:2008 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained

3、 on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 89125 0 ICS 49.060 Compliance with a B

4、ritish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4165-003:2016EUROPEAN STANDARD NORME E

5、UROPENNE EUROPISCHE NORM EN 4165-003 March 2016 ICS 49.060 Supersedes EN 4165-003:2008English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 003: Modules series 2 and series 3 - Product standard Srie arospatiale - Connecteurs l

6、ectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 003 : Modules srie 2 et srie 3 - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 003: Modul Serie 2 und Serie 3 - Produktno

7、rm This European Standard was approved by CEN on 5 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

8、erences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C

9、EN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedon

10、ia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPIS

11、CHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-003:2016 EBS EN 4165-003:2016EN 4165-003:2016 (E) 2 Contents Page European foreword

12、. 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 5 5 Male and female module coding 9 6 Main general characteristics 10 7 Designation. 11 8 Marking 13 9 Technical specification . 13 BS EN 4165-003:2016EN 4165-003:2016 (E) 3 European foreword This document

13、(EN 4165-003:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and t

14、he Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be w

15、ithdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4165-003:2008. A

16、ccording to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germ

17、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-003:2016EN 4165-003:2016 (E) 4 1 Scope This European Standard specifies the c

18、haracteristics of module in the family of modular connector coupled by central threaded coupling, or rack and panel or push-pull latching mechanism. For contacts and fillers plug associated see EN 4165-002. 2 Normative references The following documents, in whole or in part, are normatively referenc

19、ed in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3155-002, Aerospace series Electrical contacts used in elements of connect

20、ion Part 002: List and utilization of contacts EN 3155-070, Aerospace series Electrical contacts used in elements of connection Part 070: Contacts, electrical, male, type A, crimp, class S Product standard EN 3155-071, Aerospace series Electrical contacts used in elements of connection Part 071: Con

21、tacts, electrical, female, type A, crimp, class S Product standard EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operating

22、temperature 175 C continuous Part 002: Specification of performance and contact arrangements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. BS EN 4165-003:2016EN 4165-003:2016 (E) 5 4 Required characteristics 4.1 Male module interface

23、 dimensions Series 2 and series 3 See Figure 1 and Table 1. Dimensions are in millimetres. Key 1 Zone of contact (module grounded) b Optional design for sealed version 2 Grommet c Interfacial seal, see 4.5. a Polarizing keys, see Figure 5. Figure 1 Male module series 2 and 3 BS EN 4165-003:2016EN 41

24、65-003:2016 (E) 6 Table 1 Male module series 2 and 3 dimensions Size A C Mass without contacts g max. max. max. 22-20-16-12 16,46 13,35 3,0 8 18,70 11,65 2,3 4.2 Female module interface dimensions Series 2 and series 3 See Figure 2 and Table 2. Dimensions are in millimetres. Key 1 Zone of contact (m

25、odule grounded) b Optional design for sealed version 2 Grommet c Socket contact cavity, see 4.5. a Polarizing keys, see Figure 5. Figure 2 Female series 2 and series 3 module BS EN 4165-003:2016EN 4165-003:2016 (E) 7 Table 2 Female module series 2 and series 3 dimensions Size A max. B C max. series

26、2 series 3 series 2 series 3 22-20-16-12 22,40 30,96 17,16 to 17,40 25,72 to 25,96 13,35 8 33,20 11,65 4.3 Male and female module size 08 contact Grommet design For series 2 and series 3. Male module Female module Key 1 Module grommet 2 Sealing sleeve Figure 3 Male and female module size 08 BS EN 41

27、65-003:2016EN 4165-003:2016 (E) 8 4.4 Blank module series 2 and series 3 Instead of male or female modules: Normal version: 3 g max.; or Lightweight version: 1,5 g max. Figure 4 Blank module 4.5 Module interface dimensions See EN 4165-001, detail on contact and module interface. BS EN 4165-003:2016E

28、N 4165-003:2016 (E) 9 5 Male and female module coding See Figure 5 and Figure 6. Standard position N Position A Position B Position C Position D Figure 5 Male and female module polarization BS EN 4165-003:2016EN 4165-003:2016 (E) 10 Position E Position F NOTE Modules polarized E and F have no shell

29、corresponding. Figure 6 Male and female module polarization 6 Main general characteristics See EN 4165-002. BS EN 4165-003:2016EN 4165-003:2016 (E) 11 7 Designation 7.1 Electrical modules EXAMPLE Description block ELECTRICAL MODULES Identity block EN4165 A 04G16 1 N A Number of the basic standard Mo

30、dule series (see EN 4165-002) Series 2 = A Series 3 = B (not for blank module) Module arrangements and grounding module device (see EN 4165-002) Dash = No grounding G = Grounding L = No grounding, quadrax contact Q = Grounding, quadrax contact A = No grounding, grey grommet for EN 3155-070 / EN 3155

31、-071 contacts Y = Blue grommet, shunted, female contacts Z = Brown grommet, shunted, male contacts Peripherical sealing and resistance to fuel Type 1 = Without peripherical sealing and standard resistance to fuel Type 2 = With peripherical sealing and standard resistance to fuel Type 3 = Without per

32、ipherical sealing and reinforced resistance to fuel Type 4 = With peripherical sealing and reinforced resistance to fuel Polarization (see Figure 5) N = Normal, or A, B, C, D, E, F. Module and contact delivery (see Table 3) NOTE 1 If necessary, the code I9005 shall be placed between the description

33、block and the identity block. NOTE 2 The previously used designation (e.g. EN4165-04G16A1NA) is inactive for new design and should not be used as designation anymore. BS EN 4165-003:2016EN 4165-003:2016 (E) 12 Table 3 Types of contacts and delivery modules Modules type Contact code delivery A B M F

34、C D Male module Delivered without contact Female module Delivered without contact Male module Female module Male module Female module Delivered with contacts with standard barrels a Delivered with contacts with standard barrels aDelivered with contacts with reduced / enlarged barrel aDelivered with

35、contacts with reduced / enlarged barrel aEN3155-008M2222 EN3155-008M2020 EN3155-008M1616 EN3155-008M1212 EN3155-065M0808A EN3155-003F2222 EN3155-003F2020 EN3155-003F1616 EN3155-003F1212 EN3155-066F0808A EN3155-xxxx2018bEN3155-xxxx1614 c EN3155-xxxx1210 d,e EN3155-065M0810A EN3155-xxxx2018b EN3155-xx

36、xx1614 c EN3155-xxxx1210 d,e EN3155-066F0810A G N/A N/A N/A N/A Male module Female module L - Q Delivered with quadrax contacts aDelivered with quadrax contacts aN/A N/A EN3155-074xx eEN3155-075xx eMale module Female module Male module Female module A Delivered with following contacts aDelivered wit

37、h following contacts aDelivered with following contacts aDelivered with following contacts aEN3155-070xx eEN3155-071xx eEN3155-070xx eEN3155-071xx eShunted, female module Y N/A Delivered with following contacts aN/A N/A EN3155-082xx eShunted, male module Z Delivered with following contacts aN/A N/A

38、N/A EN3155-008M2222 e without selective gold plating aSee EN 3155-002. bOnly affects arrangements with size 20 contacts. cOnly affects arrangements with size 16 contacts. dOnly affects arrangements with size 12 contacts. eUnder standardization. BS EN 4165-003:2016EN 4165-003:2016 (E) 13 7.2 Blank mo

39、dule Blank module is available for all shells (receptacles and plugs) instead of male and female standard modules, in series 2 and series 3. EXAMPLE Description block BLANK MODULE Identity block EN4165-1NL Number of the basic standard Peripherical sealing unsealed = 1 sealed = 2 Polarization N = Nor

40、mal only Version Blank = Normal version L = Lightweight version 8 Marking Marking shall be applied to the module. This marking shall include: The identity block as defined in suitable product standard; The date of manufacture (yearweek); The manufacturers name or trademark. 9 Technical specification

41、 See EN 4165-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardizatio

42、n products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards

43、 -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide

44、you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Euro

45、pean and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription service

46、s are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed

47、daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Mem

48、bers. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your

49、intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If y