EN 4138-2016 en Aerospace series - Screws pan head offset cruciform recess coarse tolerance normal shank medium length thread in alloy steel cadmium plated - Classification 1 100 M.pdf

《EN 4138-2016 en Aerospace series - Screws pan head offset cruciform recess coarse tolerance normal shank medium length thread in alloy steel cadmium plated - Classification 1 100 M.pdf》由会员分享，可在线阅读，更多相关《EN 4138-2016 en Aerospace series - Screws pan head offset cruciform recess coarse tolerance normal shank medium length thread in alloy steel cadmium plated - Classification 1 100 M.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4138:2016Aerospace series Screws,pan head, offset cruciformrecess, coarse tolerance normalshank, medium length thread,in alloy steel, cadmium plated Classification: 1 100 MPa (atambient temperature) / 235 CBS EN 4138:2016 BRITISH STANDARDNational forewordThis British S

2、tandard is the UK implementation of EN 4138:2016. Itsupersedes BS EN 4138:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can beobtained on requ

3、est to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 90778 4ICS 49.030.20Compliance with a British St

4、andard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2016.Amendments issued since publicationDate Text affectedBS EN 4138:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4138 Mar

5、ch 2016 ICS 49.030.20 Supersedes EN 4138:2009English Version Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 C Srie arospatiale - Vis tte cylin

6、drique, empreinte cruciforme dporte, tige normale tolrance large, filetage moyen, en acier alli, cadmies - Classification: 1 100 MPa ( temprature ambiante) / 235 C Luft- und Raumfahrt - Flachkopfschrauben, mit Flgelkreuzschlitz, mittlere Gewindelnge, aus legiertem Stahl, verkadmet - Klasse: 1 100 MP

7、a (bei Raumtemperatur) / 235 C This European Standard was approved by CEN on 27 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d

8、ate lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio

9、n under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fo

10、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMI

11、T EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4138:2016 EBS EN 4138:2016EN 4138:2016 (E) 2 Contents P

12、age European Foreword 3 1 Scope 4 2 Normative references 4 3 Required characteristics 5 4 Designation 8 5 Marking . 8 6 Technical specification 9 Annex A (informative) Standard evolution form . 10 BS EN 4138:2016EN 4138:2016 (E) 3 European Foreword This document (EN 4138:2016) has been prepared by t

13、he Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AS

14、D, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attentio

15、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4138:2009. According to the CEN-CENELEC Internal Regulations, the

16、national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

17、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4138:2016EN 4138:2016 (E) 4 1 Scope This European Standard specifies the characteristics of screws, pan head, offset cruciform recess, c

18、oarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa1) / 235 C2)2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, o

19、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2133, Aerospace series Cadmium plating of steels with specified tensile strength 1 450 MPa, copper, copper alloys and nickel alloys EN 2137, Steel FE-PL75 1100

20、MPa Rm 1250 MPa Bars De 100 mm Aerospace series EN 2424, Aerospace series Marking of aerospace products EN 2442, Steel FE-PL711 1100 MPa Rm 1300 MPa Bars and wires De 25 mm3)EN 3514, Steel FE-PL711 Hardened and tempered 1100 MPa Rm 1300 MPa Bar and wire for bolts De 25 mm EN 9100, Quality Management

21、 Systems Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads ISO 5855-2, Aerospace MJ threads Part 2: Limit d

22、imensions for bolts and nuts ISO 7689, Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position ISO 14275, Aerospace Drives, internal, offset cruciform, ribbed Metric series

23、ISO 14276, Aerospace Drives, internal, offset cruciform Metric series TR 3775, Aerospace series Bolts and pins Materials 1)Minimum tensile strength of the material at ambient temperature 2)Maximum temperature that the screw can withstand without continuous change in its original characteristics, aft

24、er return to ambient temperature. The maximum temperature is determined by the surface treatment 3)For new design, see EN 3514 BS EN 4138:2016EN 4138:2016 (E) 5 3 Required characteristics 3.1 Configuration Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are expressed in millime

25、tres and apply after surface treatment. 3.2 Tolerances of form and position ISO 7913. 3.3 Materials EN 2137 and EN 2442 or TR 3775: alloy steel, classification 1 100 MPa. BS EN 4138:2016EN 4138:2016 (E) 6 3.4 Surface treatment EN 2133, thickness 8 m to 14 m, on all surfaces which can be contacted by

26、 a 20 mm diameter ball. On all other surfaces, a continuous deposit shall be present, but no value is specified. Black colour option: code B. Key 1 Thread 2 Marking 3 Conforms to ISO 3353-1 4 Drive 5 Shape optional 6 L4= L1+ (L2) Figure 1 BS EN 4138:2016EN 4138:2016 (E) 7 Table 1 Diameter code Threa

27、dsaD1D2D3D4D5E h12 0 0,3 min. nom. Tol. H13 nom. Tol. 030 MJ30,5 4h6h 3 6 4,7 2,3 0 0,5 1,8 0 0,2 040 MJ40,7 4h6h 4 8 6,7 3,0 1,1 2,4 050 MJ50,8 4h6h 5 10 8,7 3,4 0,5 1,5 3,0 060 MJ61 4h6h 6 12 10,7 4,2 3,6 0 0,3 070 MJ71 4h6h 7 14 12,7 5,2 1,9 4,2 080 MJ81 4h6h 8 16 14,7 6,2 4,8 100 MJ101,25 4h6h 1

28、0 20 18,7 7,9 2,4 6,0 120 MJ121,25 4h6h 12 24 22,7 9,8 7,2 Diameter code L1 0,2b, cL2L3R S Massd Length code nom. nom. Tol. max. min. e f 030 002 to 030 2 to 30 7,5 0,4 0 0,2 1,2 0,3 0,792 0,055 040 002 to 040 2 to 40 10,0 6,0 1,6 0,4 1,922 0,099 050 003 to 050 3 to 50 12,0 7,5 0,5 2,0 0,5 3,835 0,1

29、53 060 003 to 060 3 to 60 14,0 8,5 0,7 2,4 0,6 6,620 0,222 070 004 to 070 4 to 70 15,0 9,5 2,8 0,7 10,959 0,302 080 004 to 080 4 to 80 16,5 10,5 3,2 0,8 15,214 0,395 100 005 to 100 5 to 100 20,5 13,0 0,8 0 0,3 4,0 1,0 30,092 0,616 120 006 to 120 6 to 120 22,5 14,5 0,9 4,8 1,2 52,957 0,887 aIn accord

30、ance with ISO 5855-2. bIncrements: 1 for L1 100. cIf greater lengths are required, they shall be chosen using the above increments. The length code corresponds to the length L1, completed by one or two zeros to the left, where necessary, to obtain a three digit code. dApproximate values (kg/1 000 pi

31、eces), calculated on the basis of 7,85 kg/dm3, given for information purposes only. They apply to screws without holes. eValue for head and first L4. fIncrease for each additional millimetre of L4. BS EN 4138:2016EN 4138:2016 (E) 8 4 Designation EXAMPLE Description block SCREW Identity block EN4138D

32、050040AB Number of this standard Hole code (see Table 2) Diameter code (see Table 1) Length code (see Table 1) Drive code (see Table 3) Black colour code (see 3.4) NOTE If necessary the originator code I9005 shall be placed between the description block and the identity block. Table 1 Hole Code with

33、 D without (hyphen) Table 2 Drive Code ISO 14275 None ISO 14276 A 5 Marking See Table 4 and Figure 1. Table 3 Diameter code EN 2424 Style 030 and 040 N 050 to 120 B BS EN 4138:2016EN 4138:2016 (E) 9 6 Technical specification 6.1 General ISO 7689, except for clauses. 6.2 Approval of manufacturers EN

34、9100. 6.3 Qualification of screws EN 9133. BS EN 4138:2016EN 4138:2016 (E) 10 Annex A (informative) Standard evolution form MODIFICATION REASON AND VALIDATION Minus looks like a bullet a references too small Mixture of texts b reference too small Replacement ISO 7994 BY ISO14275 and ISO 14276 Roughn

35、ess symbol inside and above the drawing Add to all symbols: max e.g. Ramax 3,2 Ramax 0,8 Modify symbols according to ISO 1302. BS EN 4138:2016EN 4138:2016 (E) 11 MODIFICATION REASON AND VALIDATION L4is not defined and has no tolerance values. 6.a) Approval of manufacturers: see EN 9100; EN 2000 do n

36、ot exist anymore and replaced by EN 9100 This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards a

37、nd other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and e

38、xpertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on s

39、tandardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including B

40、ritish and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range

41、of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available

42、 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive

43、 to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standard

44、s publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or

45、 revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British S

46、tandards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as perm

47、itted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyri

48、ght & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW