EN 4008-018-2014 en Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018 Positioner for crimping tool M22520 2-01 .pdf

《EN 4008-018-2014 en Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018 Positioner for crimping tool M22520 2-01 .pdf》由会员分享，可在线阅读，更多相关《EN 4008-018-2014 en Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018 Positioner for crimping tool M22520 2-01 .pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4008-018:2014Aerospace series Elementsof electrical and opticalconnection Crimping tooland associated accessoriesPart 018: Positioner for crimping toolM22520/2-01 Product standardBS EN 4008-018:2014 BRITISH STANDARDNational forewordThis British Standard is the UK imple

2、mentation of EN 4008-018:2014.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport t

3、o include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 83455 4ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This Br

4、itish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since publicationDate Text affectedBS EN 4008-018:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4008-018 July 2014 ICS 49.060 English Version Aerospace series -

5、 Elements of electrical and optical connection - Crimping tool and associated accessories - Part 018: Positioner for crimping tool M22520/2-01 - Product standard Srie arospatiale - Organes de connexion lectrique et optique - Outils de sertissage et accessoires associs - Partie 018: Positionneur pour

6、 pince sertir M22520/2-01 - Norme de produit Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Crimpwerkzeuge und zugehriges Zubehr - Teil 018: Positionierer fr Crimpzange M22520/2-01 - Produktnorm This European Standard was approved by CEN on 12 October 2013. CEN members are boun

7、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

8、N-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre h

9、as the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

10、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Br

11、ussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4008-018:2014 EBS EN 4008-018:2014EN 4008-018:2014 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics

12、.4 5 Designation 5 6 Marking .5 7 Technical specification .5 BS EN 4008-018:2014EN 4008-018:2014 (E) 3 Foreword This document (EN 4008-018:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in acco

13、rdance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication o

14、f an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall no

15、t be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

16、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4008-018:201

17、4EN 4008-018:2014 (E) 4 1 Scope This European Standard specifies the characteristics for the positioner used with M22520/2-01 crimping tool to crimp electrical contact according to EN 4008-002. 2 Normative references The following documents, in whole or in part, are normatively referenced in this do

18、cument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series - Elements of electrical and optical connection - Test metho

19、ds - Part 100: General EN 4008-001, Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification EN 4008-002, Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessori

20、es - Part 002: List of product standards MIL-C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 28 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 4 Required characteristics 4.1 Description S

21、ecuring the positioner on the crimping tool is provided by the combined action of the two bayonets and the pressure from the internal spring on the central moving part (locator). The appropriate longitudinal positioning of the contact with respect to the crimping tool indenters is performed by the c

22、ontact butting against a shoulder on the central part bore. Locator shall be spring loaded so as to depress 0,79 mm with a force of (9 4,5) N. 4.2 Dimensions Dimensions of positioner are given in Figure 1. Dimensions and tolerances are given in millimetres. 1) Published by: DoD National (US) Mil. De

23、partment of Defense http:/www.defenselink.mil/. BS EN 4008-018:2014EN 4008-018:2014 (E) 5 Key 1 Bayonet lock pin 1,09 0,025 2 Locator in extended position 3 Stamp on this surface: “EN 4008-018 use with M22520/2-01” (conform to MIL-C-22520/2) Figure 1 Figure 1 4.3 Material, surface treatment Position

24、er body: aluminium alloy, colour blue Positioner locator: stainless steel 5 Designation EXAMPLE 6 Marking See Figure 1. 7 Technical specification See EN 4008-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards an

25、d other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usW

26、e bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation pro

27、cess. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Custome

28、r Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from oth

29、er Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll ha

30、ve instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards

31、, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscrib

32、ing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is

33、current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI

34、 publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international st

35、andardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocop

36、ying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW