EN 3953-2001 en Aerospace Series - Silver Base Alloy AG-B12401 (AgCu40Zn5Ni) - Filler Metal for Brazing - Wire《航空航天系列 银基合金AG-B12401(AgCu40Zn5Ni) 硬钎焊用填充金属 金属丝》.pdf

《EN 3953-2001 en Aerospace Series - Silver Base Alloy AG-B12401 (AgCu40Zn5Ni) - Filler Metal for Brazing - Wire《航空航天系列 银基合金AG-B12401(AgCu40Zn5Ni) 硬钎焊用填充金属 金属丝》.pdf》由会员分享，可在线阅读，更多相关《EN 3953-2001 en Aerospace Series - Silver Base Alloy AG-B12401 (AgCu40Zn5Ni) - Filler Metal for Brazing - Wire《航空航天系列 银基合金AG-B12401(AgCu40Zn5Ni) 硬钎焊用填充金属 金属丝》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES Aerospace series - Silver base alloy (AgCu40Zn5Ni) - F“ler metal for brazing - AG-BI 240 I Wire The European Standard EN 3953:2001 has the status of a British Standard ICs 49.025.15 BS EN 3953:2001 O NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT

2、 LAW BS EN 3953:ZOOl Amd. No. National foreword Date Comments This British Standard is the official English language version of EN 3953:2001. The UK participation in its preparation was entrusted to Technical Committee ACE/61, Inspection and testing requirements for aerospace metallic materials, whi

3、ch has the responsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the U

4、K. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “I

5、nternational Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance wit

6、h a British Standard does not of itself confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 Summary of pages T

7、his document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication O BSI 07-2001 ISBN O 580 37732 6 EUR

8、OPEAN STANDARD NORME EUROPENNE O EUROPISCHE NORM EN 3953 June 2001 ICs 49.025.15 English version Aerospace series - Silver base alloy AG-BI 2401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire Srie arospatiale - Alliage base argent AG-B12401 (AgCu4OZnSNi) - Mtal dapport de brasage - Fil Luft- und Ra

9、umfahrt - Silberbasislegierung AG-B12401 (AgCu4OZn5Ni) - Hartlot in Form von Draht This European Standard was approved by CEN on 19 April 2001. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n

10、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in a

11、ny other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, German

12、y, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. O EUROPEAN COMMiTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 8-1050 Brussels 0 2001 CEN All

13、rights of exploitation in any form and by any means resewed worldwide for CEN national Members. Ref. No. EN 3953:2001 E Page 2 EN 3953:2001 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accor

14、dance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication

15、of an identical text or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2001. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

16、European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 3 EN 3953:2001 O Introduction This standard is part of the series of EN metallic

17、 material standards for aerospace applications. The general organisation of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-6. 1 Scope This standard specifies the requirements relating to: Silver base alloy AG-B12401 (AgCu40Zn5Ni) Filler metal for braz

18、ing Wire for aerospace applications. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references

19、, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2043 Aerospace series - Metallic materials - General requir

20、ements for semi-finished product qualification (excluding forgings and castings) 1) Aerospace series - Metallic materials - Filler metal for brazing - Technical specification 1) EN 3875 EN 4258 Aerospace series - Metallic materials - General organization of standardization - Links between types of E

21、N standards and their use EN 4500-6 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 6: Specific rules for filler metals for brazing 1) O 1) Published as AECMA Prestandard at the date of publication of this standard Page 4 EN 3953:2001 2 I 1 I

22、Material designation I Silver base braze alloy AG-B12401 (AgCu40Zn5Ni) Chemical Others Total Element Cu Ni Zn AI Cd Bi Pb P si min. 39,O 0,50 4,O - - - - - - - composition YO max. 41,O 1,50 6,O lo*) 0,030 0,030 0,025 80) 0,05 0,15 5 Air or inert gas melted I 3 I Method of melting I Technical specifi

23、cation EN 3875 I I (4.1 I Form I Wire I Delivery condition Heat treatment Delivery condition code Use condition Cold formed and cleaned 14.2 I Method of production I As manufactured or annealed - U Delivery condition I - 14.3 I Limit dimension(s) I mm I 11 12 13 - Direction of test piece - Temperatu

24、re e oc - Proof stress Rp0.2 MPa - 6.1 - 6.2 7 - Reduction of area Z Yo - II I Hardness Shear strength Rc MPa Bending k- Impact strength I - I I Heat treatment I - - - - Characteristics Stress Elongation Rupture stress Elongation at rupture I - I 8.1 I Test sample(s) _ aa MPa - a yo - OR MPa - A % -

25、 I - 8.2 I Test piece(s) I 27 I I 8.3 I Heat treatment Notes (see line 98) 9 I Dimensions concerned I mm I I I I Thickness of cladding on yo each face I 14 IT I Strength I Rm IMPal - I 15 I I Elongation I A I % I - - 16 17 18 19 20 - - - I Temperature I 0 I “C I - I Time lhl - Page 5 EN 3953:2001 kt

26、ernal defects hermal analysis Differential thermal analysis) Yettability Fusion test) 3atch uniformity Material verification) I Marking inspection Notes Typical use - See EN 3875 - See EN 3875 7 Liquidus: 855 “C Solidus: 720 OC - See EN 3875 - See EN 3875 See EN 3875 See EN 3875 *) p.p.m. Joining ca

27、rbon, low alloy and austenitic steels. 1 Page 6 EN 3953:2001 roduct qualification See EN 2043 ;lualification programme to be agreed between manufacturer and purchaser. a O a a BS EN 3953:2001 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution 3SI is the independent national

28、 body responsible for preparing 3ritish Standards. It presents the UK view on standards in Europe and at the nternational level. It is incorporated by Royal Charter. 3evisions 3ritish Standards are updated by amendment or revision. Users of 3ritish Standards should make sure that they possess the la

29、test amendments or ?ditionS. :t is the constant aim of BSI to improve the quality of our products and services. Ne would be grateful if anyone finding an inaccuracy or ambiguity while using ;his British Standard would inform the Secretary of the technical committee Vesponsible, the identity of which

30、 can be found on the inside front cover. Fel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures ;hat subscribers automatically receive the latest editions of standards. Buying standards 3rders for all BSI, international and foreign standar

31、ds publications should be iddressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at httx,:/www.bsi-. n response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publishe

32、d as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available whic

33、h give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other ben

34、efits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at httx,:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international s

35、tandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. This does

36、 not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.