EN 3862-2013 en Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass《航空航天系列 非金属材料-玻璃幻灯片 材料标准化学钢化苏打石灰浮法玻璃.pdf

《EN 3862-2013 en Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass《航空航天系列 非金属材料-玻璃幻灯片 材料标准化学钢化苏打石灰浮法玻璃.pdf》由会员分享，可在线阅读，更多相关《EN 3862-2013 en Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass《航空航天系列 非金属材料-玻璃幻灯片 材料标准化学钢化苏打石灰浮法玻璃.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3862:2013Aerospace series Non-metallic materials Glasstransparencies Materialstandard Chemicallytempered soda lime float glassBS EN 3862:2013 BRITISH STANDARDNational forew

2、ordThis British Standard is the UK implementation of EN 3862:2013.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/65, Non-metallic materials for aerospace purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This pu

3、blication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80244 7ICS 49.025.99Compliance with a British Standard cannot confer immunit

4、y fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedBS EN 3862:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3862 January 2013 ICS 49.025.99 En

5、glish Version Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass Srie arospatiale - Matriaux non-mtalliques - Transparents en verre - Norme de matriaux - Feuilles de verre sodo calcique flott trempes chimiquement Luft- und

6、 Raumfahrt - Nichtmetallische Werkstoffe - Transparente Glaswerkstoffe - Werkstoffnorm - Chemisch vorgespanntes Kalk-Natron-Floatglas This European Standard was approved by CEN on 17 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio

7、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in

8、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standard

9、s bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

10、ia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for

11、 CEN national Members. Ref. No. EN 3862:2013: EBS EN 3862:2013EN 3862:2013 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Definitions, symbols and abbreviations 5 4 Requirements .6 BS EN 3862:2013EN 3862:2013 (E) 3 Foreword This document (EN 3862:2013) has been p

12、repared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member cou

13、ntries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attent

14、ion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of t

15、he following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

16、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3862:2013EN 3862:2013 (E) 4 Introduction This standard is part of the series of EN non-metallic materials standards for aerospace applications. The general organisation of t

17、his series is described in EN 4385. This standard is a level 3 document as defined in EN 4385. It has been prepared in accordance with TR 7000-5. BS EN 3862:2013EN 3862:2013 (E) 5 1 Scope This European Standard specifies the requirements relating to universally available and high light transmission,

18、 chemically tempered float glass plies, for aerospace applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references

19、, the latest edition of the referenced document (including any amendments) applies. EN 3001, Aerospace series Tempered float glass plies for aircraft applications Technical specification 1)EN 4385, Aerospace series Non-metallic materials General organisation of standardisation Links between types of

20、 standards 1)TR 7000-5, Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 5: Glass transparencies 2)3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of this document the following definitions apply: 3.1.1 Definition of

21、 subcase numbering In the column “requirement“ at the left hand side a subcase number is given. The meaning of these subcase numbers is as follows: Subcase number Definition Technical specification 1 Test method 2 Frequency of testing 3 Sample type 4 Test piece definition 5 Conditioning of test piec

22、e 6 Testing condition 7 Acceptance criteria 1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this standard (www.asd-stan.org). BS EN 3862:2013EN 3862:2013 (E) 6 Note 1 to entry

23、: The absence of a subcase indicates that the necessary information is given in Table 1 of this standard, e.g. in the reference to the technical standard (characteristic 1.004). All the necessary information which does not appear is to be found in the referenced technical specification or the releva

24、nt test method. Note 2 to entry: In this material standard, batch acceptance test titles and subcases 7 acceptance criteria are highlighted in the form of a bold frame and bold characters to show that they are mandatory for routine acceptance of the material. 3.1.2 Type A Universally available float

25、 glass 3.1.3 Type B High light transmission float glass 3.1.4 Other definitions See EN 3001. 4 Requirements The required characteristics are given in: Table 1 General requirements; Table 2 Requirements in the delivery condition; Table 3 Requirements as processed to characteristic number 1.013; Table

26、 4 Environmental testing requirements as processed to characteristic number 1.013. BS EN 3862:2013EN 3862:2013 (E) 7 Table 1 General requirements Characteristic number Characteristic Requirements 1.001 Material description Glass transparency 1.002 Formulation Soda-lime glass, see EN 3001. 1.003 Form

27、 and method of production Chemically tempered float glass 1.004 Technical specification See EN 3001. 1.005 Grade A03 A04 A05 A06 A08 Type A A A A A Thickness mm 0 89 88,2 87,3 86,4 84,6 A10 A12 A15 A19 B08 % 82,8 81,2 78,2 74,9 90,5 2.111 Light transmission 6 At 800 nm type B glass 7 B08 % 80,7 2.11

28、1 Optical distortion 7 See EN 3001. 3.111 Refractive index 7 n 1,52 0,01 2.111 Haze 7 % 1 2.111 Optical defects 7 See EN 3001. 2.301 Density 7 g/cm32,50 0,02 2.303 Linear expansion 7 10-7/K 88,5 3,5 2.308 Surface compression stress 7 MPa Shall comply with the limits agreed during product qualificati

29、on. 2.311 Modulus of rupture 7 MPa Shall comply with the limits agreed during product qualification. 2.999 Notes Table 3 Requirements as processed to characteristic number 1.013 No requirement - refer to Table 2 Table 4 Environmental testing requirements as processed to characteristic number 1.013 N

30、o requirement This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Ro

31、yal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by a

32、mendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Stan

33、dards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating serv

34、ice called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the webs

35、ite addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant i

36、nternational standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with st

37、andards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British

38、 Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright

39、in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted

40、 in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: