EN 3660-020-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020 Cable outlet style A straight unsealed sel.pdf

《EN 3660-020-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020 Cable outlet style A straight unsealed sel.pdf》由会员分享，可在线阅读，更多相关《EN 3660-020-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020 Cable outlet style A straight unsealed sel.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN3660-020:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 020: Cable outlet, style A, straight,unsealed, self-locking with clampstrain reli

2、ef for EN 3645 ProductstandardThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 October2009 BSI 2009ISBN 978 0 580 61332 6Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-020:2009National forewordThis British Standard is the

3、 UK implementation of EN 3660-020:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not

4、purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3660-020:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-020 September 2009 ICS 49.060 E

5、nglish Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard Srie arospatiale - Accessoires arrire pour connecteurs

6、 circulaires et rectangulaires lectriques et optiques - Partie 020: Raccord droit, type A, non tanche, auto-frein avec brides serre-cbles pour EN 3645 - Norme de produit Luft- und Raumfahrt - Endgehause fur elektrische und optische Rund und Rechteck steckverbinder - Teil 020:Endgehause, Bauform A, g

7、erade Ausfuhrung, selbstsichernd, nicht abgedichtet, mit Zugentlastungsklemme fur EN 3645 - Produktnorm This European Standard was approved by CEN on 28 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

8、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

9、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Cz

10、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EU

11、ROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-020:2009: EBS EN 3660-020:2009EN 3660-020:2009 (E) 2 Contents Page

12、 Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Characteristics .4 5 Designation . 11 6 Marking 11 7 Technical specification 11 BS EN 3660-020:2009EN 3660-020:2009 (E) 3 Foreword This document (EN 3660-020:2009) has been prepared by the Aerospace and Defence Industries As

13、sociation of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. T

14、his European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the

15、 elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement th

16、is European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the

17、 United Kingdom. BS EN 3660-020:2009EN 3660-020:2009 (E) 4 1 Scope This product standard defines a range of cable outlets, style A, straight, unsealed, self-locking, with clamp strain relief for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, C

18、lass N : 65 C to 200 C Class W : 65 C to 175 C Class K : 65 C to 260 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

19、document (including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 3645 (series), Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 20

20、0 C continuous EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index

21、 of product standards EN 3660-037, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 037: Bushing strip, elastomer, for cable outlet, style Z Product standard SAE AS85049, Connector accessories, electrical general specification for 1)3 Term

22、s and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. For interface dimensions, see 4.2. *And all parts quoted in this standard. 1) Published by: Society

23、of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001. BS EN 3660-020:2009EN 3660-020:2009 (E) 5 Dimensions are in millimetres Key 1 A Thread 2 Knurled, manufacturers option 3 Marking, manufacturers option, see Clause 6. 4 Captive self-locking nut 5 Self-locking mech

24、anism NOTE Coupling nut to be captive on cable outlet body but rotatetable. Figure 1 BS EN 3660-020:2009EN 3660-020:2009 (E) 6 Table 1 Dimensions in millimetres Shell size A B Ca D E F b G H Screw size Mass. max. g Thread Overall length 0,8Screw extension Class 2A Classes N and W ClassK max. min. ma

25、x. max. max. max. min. min. max. inches 09 M12 X 1-6H 22,4 12,9 19,6 26,7 21,79 5,56 5,6 1,52 6,35 6-32UNC 18,0 34,0 11 M15 X 1-6H 23,9 16,2 22,6 29,7 24,99 6,71 6,9 6-32UNC 18,5 35,0 13 M18 X 1-6H 28,4 19,3 25,7 32,8 29,39 8,74 8,9 6-32UNC 21,5 40,0 15 M22 X 1-6H 30,2 19,3 27,5 32,8 32,49 11,68 11,

26、9 6-32UNC 23,0 43,5 17 M25 X 1-6H 36,6 22,4 28,7 35,8 35,71 13,84 14,0 6-32UNC 26,0 48,5 19 M28 X 1-6H 39,6 28,7 35,1 42,2 38,51 15,62 15,7 8-32UNC 27,0 50,0 21 M31 X 1-6H 42,9 31,9 38,4 45,5 41,71 17,73 17,8 8-32UNC 27,5 52,5 23 M34 X 1-6H 44,5 35,1 41,4 48,5 44,91 19,81 19,8 8-32UNC 31,0 85,0 25 M

27、37 X 1-6H 47,8 38,4 44,7 51,8 47,47 21,59 21,6 8-32UNC 33,0 61,5 aC dimension is measured from the bottom of the accessory teeth to the end of the cable outlet. bF cable entry is measured with saddle bars closed and bottomed on clamp ears. 4.2 Component parts A bushing strip, see EN 3660-037, should

28、 be used to increase cable diameter to ensure proper function of the cable outlet clamp. Alternatively an appropriate elastomeric tape, as authorized by the OEM, may be used. 4.3 Interface dimensions 4.3.1 Associated connection See EN 3660-002. 4.3.2 AS85049 Interface See Figure 2 and Table 2. BS EN

29、 3660-020:2009EN 3660-020:2009 (E) 7 Dimensions in millimetres Figure 2 Table 2 Dimensions in millimetres Shell size R S T U a N Ref. Number of teeth min. min. min. 09 10,57 7,50 6,70 2,90 12 11 13,56 10,80 9,90 2,90 16 13 16,58 13,80 12,80 2,90 20 15 20,57 16,90 16,00 2,90 24 17 23,57 20,10 19,20 2

30、,90 28 19 26,57 22,80 21,40 2,90 32 21 29,57 26,00 24,60 2,90 36 23 32,56 29,10 27,70 2,90 40 25 35,56 32,30 30,90 1,70 44 aMinimum penetration of T diameter. 4.4 Material and finish Material/Finish Class N : Aluminium/Electroless nickel plated Material/Finish Class W : Aluminium/Olive drab cadmium

31、plated Material/Finish Class K : Stainless steel/Passivated Hardware: Screws, lock nuts : Stainless steel/Passivated, silver plate optional BS EN 3660-020:2009EN 3660-020:2009 (E) 8 4.5 Assembly torque These torque values are intended for installation use only, see Table 3. Table 3 Shell size Torque

32、 Nm 0,5 09 4,5 11 13 15 17 19 21 9,0 23 25 4.6 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table 4. Table 4 Shell size Torque Nm 0,5 09 5,5 11 13 15 17 19 21 11,0 23 25 4.7 Tests Test details to be in accordance with Table 5, EN 3660-001 and EN 259

33、1-100. Qualification to be in accordance with EN 3660-001. BS EN 3660-020:2009EN 3660-020:2009 (E) 9 Table 5 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housing (shell) electrical co

34、ntinuity X Classes W, N and K only. 5 m max. 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X Classes N and W only 305 Rapid change of temperature X 306 Mould growth X See EN 3660-001, “performance of qualification tests“. 307 Salt mist X Cable outlet not fitt

35、ed to a connector and suspended with non-metallic cord. Duration: Classes N and K 48 h Class W 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X 316 Ozone resistance X 317 Flammability X 318 Fire-resistance X Class K only. In accordance with EN 3645 Classes K, KE,

36、S and SE, respectively. 402 Shock X Method A Severity: 100 g No. of shocks: One in each direction in 2 perpendicular axes, i.e. 4 shocks continued BS EN 3660-020:2009EN 3660-020:2009 (E) 10 Table 5 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 403 Sin

37、usoidal and random vibration X Method B. Figure 3. Level J Duration: 8 hours in each of two axes. Test performed: On one group 50 % of time at 65 C 50 % of time at ambient temperature On a 2ndgroup 100 % of time at maximum temperature of class under test 406 Mechanical endurance X 408 Mating and unm

38、ating forces X 420 Mechanical strength of rear accessories X Phase A Shell size Bending moment Nm 09 5,5 11 8,5 13 15 11,5 17 14,0 19 21 23 25 17,0 Phase D and Table 4. 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector. Max value: Classes N and W 2,0 Class K 5,0

39、a1 GHz to 10 GHz under consideration. BS EN 3660-020:2009EN 3660-020:2009 (E) 11 5 Designation EXAMPLE 1 Description block CABLE OUTLET Identity block EN3660-020XXX Number of this standard Material/Finish class (see 4.4) Shell size EXAMPLE 2 EN3660-020N09 Style A, cable outlet, 90, straight, alumini

40、um, electroless nickel, shell size 09. NOTE 1 No gaps are required between sections in the part number when printed. NOTE 2 If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking See EN 3660-001 and Figure 1. 7 Technical specification See EN 3660

41、-001. BS EN3660-020:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at thein

42、ternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We w

43、ould be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an indiv

44、idual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Emai

45、l: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBS

46、I provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+

47、44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +4

48、4 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the pub

49、lications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not precl