EN 3375-001-2007 en Aerospace series - Cable electrical for digital data transmission - Part 001 Technical specification《航空航天系列 数字数据传输用电缆 第001部分 技术规范》.pdf

《EN 3375-001-2007 en Aerospace series - Cable electrical for digital data transmission - Part 001 Technical specification《航空航天系列 数字数据传输用电缆 第001部分 技术规范》.pdf》由会员分享，可在线阅读，更多相关《EN 3375-001-2007 en Aerospace series - Cable electrical for digital data transmission - Part 001 Technical specification《航空航天系列 数字数据传输用电缆 第001部分 技术规范》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 3375-001:2007Aerospace series Cable, electrical, for digital data transmission Part 001: Technical specificationThe European Standard EN 3375-001:2007 has the status of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g

2、54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3375-001:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007 BSI 2007ISBN 978 0 580 57215 9National fo

3、rewordThis British Standard is the UK implementation of EN 3375-001:2007.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Panel ACE/6/-/2, Aerospace Cables.A list of organizations represented on this commi

4、ttee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since public

5、ationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3375-001July 2007ICS 49.060English VersionAerospace series - Cable, electrical, for digital data transmission- Part 001: Technical specificationSrie arospatiale - Cbles lectriques pour transmissionde donnes numriques - Part

6、ie 001 : SpcificationtechniqueLuft- und Raumfahrt - Elektrische Leitungen frDigitaldatenbertragungen - Teil 001: TechnischeLieferbedingungenThis European Standard was approved by CEN on 28 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

7、nditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in thre

8、e official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Aust

9、ria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITT

10、EE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-001:2007: E2 Contents Page Foreword3 1

11、 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Materials and construction of cables 4 5 Required characteristics.6 6 Tests methods6 7 Quality assurance10 8 Identification and marking 12 9 Packaging, labelling and delivery lengths 13 EN 3375-001:20073 Foreword This document (EN 3375-0

12、01:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Service

13、s of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the lates

14、t by January 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national sta

15、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

16、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3375-001:20074 1 Scope This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables. 2 Normative references The fo

17、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2574, Aircraft Electrical cables Identification mar

18、king. ISO 8815, Aircraft Electrical cables and cable harnesses Vocabulary. EN 2083, Aerospace series Copper and copper alloys conductors for electrical cables Product standard. EN 2084, Aerospace series Cables, electric, single-core, general purpose, with conductors in copper or copper alloy Technic

19、al specification. EN 2235, Aerospace series Single and multicore electrical cables, screened and jacketed. EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General. EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical

20、cables. 1)EN 4434, Aerospace series Copper or copper alloy lightweight conductors for electrical cables Product standard (Normal and tight tolerances). EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. 3 Terms and definitions For the purposes

21、of this standard, the terms and definitions given in ISO 8815 and EN 3475-100 apply. 4 Materials and construction of cables 4.1 General The composition, dimensions and mass of the cable shall conform to the characteristics below, as well as the values specified in the product standards. The individu

22、al cores shall conform to EN 2083 or EN 4434, EN 2084 and the product standards. *And all parts quoted in this standard. 1) Published as ASD Prestandard at the date of publication of this standard. EN 3375-001:20075 4.2 Materials The materials shall conform to the product standard. The surface of co

23、nductive materials used shall be free from corrosion and other contamination. Insulation and others materials shall have no corrosive effect upon the conductors and screens and shall not be susceptible to attack by mould and other micro-organisms. 4.3 Construction of cables 4.3.1 General The permiss

24、ible operating temperature of conductors shall not be lower than the maximum operating temperature of the cable as a whole. 4.3.2 Cabled cores The lay length of the outer lay shall not be less than eight times and not more than 16 times the nominal diameter of the cabled cores, except if a different

25、 value is necessary to maintain the required characteristics. The core shall not be spliced. Where filler cores are used, this shall be specified in the product standard. The assembly may be held together with an overall wrap. 4.3.3 Screened cables 4.3.3.1 General The construction shall conform to t

26、he product standard. Depending on protection level, the screening may be composed of: one or several spiral layers; one or several braids made using strands or strips; one or several metallic or other strips; one or several layers of extruded conductive or non-conductive materials; a combination of

27、the above. The screening may be individual and/or overall. The individual strands or strips used for the screen shall be free from kinks, loops or breaks. Except when particular materials are used, they shall conform to standard EN 2083 or EN 4434 or shall satisfy the mechanical tests in EN 3475-505

28、 to EN 3475-508 before use. Where spiral screening is used, the first lay direction shall be contrary to that of the cabled cores. 4.3.3.2 Joints Splices of the individual strands or strips may be affected by brazing, soldering or folding in. There shall be no more than one splice per 3 m cable leng

29、th (measured between different individual strands or strips). EN 3375-001:20076 4.3.3.3 Braid screen pushback capability In accordance with Table 1, test 6.49. 4.3.3.4 Angle of spiral screening or braiding The angle of spiral screening or braiding (as shown in Figure 1 of EN 2235), measured against

30、the longitudinal axis of the cable shall be at least 10, except if a different value is necessary to maintain the required characteristics. 4.3.3.5 Screen coverage Coverage , if specified, is determined in accordance with EN 2235. 4.3.4 Outer jacket The construction shall conform to the product stan

31、dard. 4.4 Colours of components and jacket See product standard. 5 Required characteristics The characteristics of the cables, tested according to the methods described hereafter shall comply with the values given in the product standard. 6 Tests methods See Table 1. EN 3375-001:20077 Table 1 Tests:

32、 methods, application and requirements Tests Each delivery No. Description EN 3475- (and/or particulars) Qualificationa (see 7.1) Onall cables(see 7.2.1and 7.2.2) Prior to delivery(see 7.2.1 and 7.2.3) Periodic Every threeyears(see 7.2.4) Requirements (and/or particulars) 6 General 100 X X X X 6.1 V

33、isual examination b201 3 X Cable construction as described in Clause 4. Marking: See Clause 8. 6.2 Mass 202 3 X Product standard 6.3 Dimensions (all) b203 3 Product standard outer diameter X 6.4 Ohmic resistance per unit length 301 3 X EN 2083 or Product standard 6.5 Voltage proof test: 302 immersio

34、n test dry test dry impulse test dielectric strength of cores Alternative to dry test 3 X X X Product standard 6.6 Insulation resistance 303 3 dry test immersion test X X Product standard 6.7 Surface resistance b304 3 X For component: 1 250 M.mm 6.8 Overload resistance 305 Not applicable 6.9 Continu

35、ity of conductors 306 1 X 6.10 Corona extinction voltage 307 1 X If applicable: see Product standard 6.11 Accelerated ageing 401 Mandrel diameter, test load and temperature: Product standard 3 X 6.12 Shrinkage and delamination 402 Temperature: Product standard 3 X Product standard 6.13 Delamination

36、and blocking 403 Mandrel diameter and temperature: Product standard 3 X 6.14 Thermal shock 404 Product standard 3 X Product standard continued EN 3375-001:20078 Table 1 Tests: methods, application and requirements (continued) Tests Each delivery No. Description EN 3475- (and/or particulars) Qualific

37、ationa (see 7.1) Onall cables(see 7.2.1 and 7.2.2) Prior to delivery(see 7.2.1 and 7.2.3) Periodic Every threeyears(see 7.2.4) Requirements (and/or particulars) 6.15 Bending at ambient temperature 405 Mandrel diameter and load: Product standard 3 X 6.16 Cold bend test 406 Mandrel diameter and load:

38、Product standard 3 X 6.17 Flammability 407 Load: Product standard 3 X 6.18 Fire resistance 408 Not applicable 6.19 Air-excluded ageing 409 Not applicable 6.20 Thermal endurance 410 Not applicable 6.21 Resistance to fluids c411 1 per fluid X c6.22 Humidity resistance 412 Not applicable 6.23 Wrap back

39、 test 413 Not applicable 6.24 Differential scanning calorimeter (DSC test) 414 Not applicable 6.25 Rapid change of temperature 415 3 X If applicable: see Product standard6.26 Thermal stability 416 3 X If applicable: see Product standard 6.27 Fire resistance of cable inside shielded harness 417 Not a

40、pplicable 6.28 Thermal endurance for conductors 418 Not applicable 6.29 Dynamic cut-through 501 3 X Product standard 6.30 Notch propagation 502 Cut depth: Product standard 3 X 6.31 Scrape abrasion 503 Load: Product standard 3 X Requirements to be considered at 20 C unless otherwise specified 6.32 To

41、rsion 504 Not applicable continued EN 3375-001:20079 Table 1 Tests: methods, application and requirements (continued) Tests Each delivery No. Description EN 3475- (and/or particulars) Qualificationa (see 7.1) Onall cables(see 7.2.1 and 7.2.2) Prior to delivery(see 7.2.1 and 7.2.3) Periodic Every thr

42、eeyears(see 7.2.4) Requirements (and/or particulars) 6.33 Tensile test on conductors and strands d505 3 X 6.34 Plating continuity b506 3 X 6.35 Adherence of plating b507 3 X6.36 Plating thickness b508 3 X Product standard 6.37 Solderability b509 3 X Product standard 6.38 Tensile strength and elongat

43、ion of extruded insulation, sheath and jacket material 510 Not applicable 6.39 Cable-to-cable abrasion 511 Not applicable 6.40 Flexure endurance 512 Not applicable 6.41 Deformation resistance (Installation with plastic cable ties) 513 1 X If applicable: see Product standard 6.42 Porosity of copper c

44、ladding on aluminium strands 514 Not applicable 6.43 Smoke density 601 Applicable c6.44 Toxicity 602 Applicable c6.45 Resistance to wet arc tracking 603 Not applicable 6.46 Resistance to dry arc propagation 604 Not applicable 6.47 Wet short circuit test 605 Not applicable 6.48 Strippability and adhe

45、rence of insulation to the conductor b701 3 X For component: Product standard 6.49 Screen pushback capability 702 3 X 6.50 Permanence of manufacturers marking 703 3 X 6.51 Flexibility 704 Not applicable continued EN 3375-001:200710 Table 1 Tests: methods, application and requirements (concluded) Tes

46、ts Each delivery No. Description EN 3475- (and/or particulars) Qualificationa (see 7.1) Onall cables(see 7.2.1 and 7.2.2) Prior to delivery(see 7.2.1 and 7.2.3) Periodic Every threeyears(see 7.2.4) Requirements (and/or particulars) 6.52 Permanence of user-applied marking EN 3838 X X Product standard

47、 Contrast measurement 705 Laser markability: 706 X Product standard 6.53 Capacitance per unit length 801 3 X Product standard 6.54 Capacitance unbalance 802 3 X Product standard 6.55 Capacitance variation 803 3 X If applicable: see Product standard 6.56 Velocity of propagation 804 3 X If applicable:

48、 see Product standard 6.57 Characteristic impedance 805 3 X Product standard 6.58 Attenuation 806 3 X Product standard 6.59 Transfer impedance 807 1 X Product standard 6.60 Cross-talk 808 1 X If applicable: see Product standard 6.61 Resistance unbalance (DC) 809 1 X Product standard 6.62 Structural

49、return loss 810 1 X Product standard 6.63 Unbalance attenuation 811 1 X Product standard aNumber of specimens per cross-section for each test unless otherwise specified. bCarried out on component and cable. cFor a series containing several cable sizes, tests required on one size only. dCarried out on component only. 7 Quality assurance 7.1 Qualification 7.1.1 General requirements See EN 9133. EN 3375-001:200711 7.1.2 Qualification conditions The cables shall be submit