EN 3155-024-2006 en Aerospace series Electrical contacts used in elements of connection Part 024 Contacts electrical triaxial size 8 male type D crimp class S Product standard《航空航天.pdf

《EN 3155-024-2006 en Aerospace series Electrical contacts used in elements of connection Part 024 Contacts electrical triaxial size 8 male type D crimp class S Product standard《航空航天.pdf》由会员分享，可在线阅读，更多相关《EN 3155-024-2006 en Aerospace series Electrical contacts used in elements of connection Part 024 Contacts electrical triaxial size 8 male type D crimp class S Product standard《航空航天.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 3155-024:2006Aerospace series Electrical contacts used in elements of connection Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S Product standardThe European Standard EN 3155-024:2006 has the status of a British StandardICS 49.060g49g50g3g38g50g51

2、g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3155-024:2006This British Standard was published under the authority of the Standards Policy and Strategy Commi

3、ttee on 31 October 2006 BSI 2006ISBN 0 580 49464 0National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3155-024:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology,

4、to Subcommittee ACE/6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a Br

5、itish Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3155-024June 2006ICS 49.060English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 024: Contacts,

6、 electrical, triaxial, size 8, male,type D, crimp, class S - Product standardSrie arospatiale - Contacts lectriques utiliss dans lesorganes de connexion - Partie 024 : Contacts lectriques,triaxiaux, taille 8, males, type D, sertir, classe S - Normede produitLuft- und Raumfahrt - Elektrische Kontakte

7、 zur Verwendungin Verbindungselementen - Teil 024: ElektrischeStiftkontakte, triaxial, Gre 8, Typ D, crimpbar, Klasse S -ProduktnormThis European Standard was approved by CEN on 20 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

8、 giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official ver

9、sions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cy

10、prus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMI

11、T EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-024:2006: E2 Contents Page Foreword3 Introduction .4 1 Scope 4 2

12、 Normative references 4 3 Terms and definitions .5 4 Required characteristics.5 5 Designation . 12 6 Marking 12 7 Technical specification 12 BS EN 3155-024:20063 Foreword This European Standard (EN 3155-024:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardizat

13、ion (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be

14、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this docume

15、nt may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au

16、stria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3155-024:20

17、064 Introduction The contacts defined by this standard are derived from, and are interchangeable with, contacts conforming to AS 39029/90. They are intermateable with contacts conforming to EN 3155-013 and AS 39029/91. 1 Scope This standard specifies the required characteristics and tests applicable

18、 to male electrical contacts, type D, crimp, class S, 65 C to 200 C, size 8 used in elements of connection according to EN 3155-001. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-025. 2 Normative references The following referenced documents are in

19、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods

20、Part 100 : General. EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification. 1)EN 3155-013, Aerospace series Electrical contacts used in elements of connection Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R

21、 Product standard. EN 3155-025, Aerospace series Electrical contacts used in elements of connection Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S Product standard. EN 3375-003, Aerospace series Electrical cables for signal data transmissions Operating temperature m

22、ax. 150/200/260 C Part 003: Single braid Product standard. 2)EN 3375-004, Aerospace series Electrical cables for signal data transmissions Operating temperature max. 150/200/260 C Part 004: Double braid Product standard. 2)EN 3375-005, Aerospace series Electrical cables for signal data transmissions

23、 Operating temperature max. 150/200/260 C Part 005: Double braid + metallic layer Product standard. 2)EN 4008-003, Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 003: Positioner for Crimping Tool M22520/2-01.2) * All parts quoted in this

24、 standard. 1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at date of this publication. BS EN 3155-024:20065 EN 4008-004, Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 004: Die for Crimpi

25、ng Tool M22520/5-01.2)EN 4530-002, Aerospace series Sealing sleeves used in elements of connection Part 002: List and utilization of sealing sleeves.MIL-I-81969/14, Installing and removal tools, connector electrical contact, type III, class 2, composition B. 3)MIL-PRF-5606H, Hydraulic fluid, petrole

26、um base; aircraft, missile and ordnance. 3)4)MIL-PRF-7808L, Lubricating oil, aircraft turbine engine, synthetic base, NATO code number O-148. 3)MIL-PRF-7870C, Lubricating oil: general purpose, low temperature. 3)MIL-PRF-23699F, Lubricating oil, aircraft turbine engine, synthetic base, NATO code numb

27、er O-156. 3)MIL-PRF-87937D, Cleaning compound, aerospace equipment. 3)AMS 1424, Fluid, Deicing/Anti-Icing, Aircraft - SAE Type I. 5)AS 1241, Fire resistant phosphate ester hydraulic fluid for aircraft. 5)AS 39029/90, Contact, Electrical Connector, Concentric-Twinax, Pin, Shielded, Size 8.5)AS 39029/

28、91, Contact, Electrical Connector, Concentric-Twinax, Socket, Shielded, Size 8.5)3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 3155-001 apply. 4 Required characteristics 4.1 Dimensions and mass Dimensions are given in millimetres after surf

29、ace treatment: See Figures 1 and 2 and Table 1. Mass: 3,3 g max. 4.2 Materials, surface treatment Materials: Conductive copper alloy Dielectric: PEEK or equivalent Surface treatment: Gold on appropriate undercoat (selective protective finish permitted). 3) Published by: Department of Defense (DOD),

30、The Pentagon, Washington D.C. 20301, USA. 4) Inactive for new design after 29 March 1996. For new designs, use MIL-PRF-87257 or MIL-PRF-83282. 5) Published by: Society of Automotive Engineering (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. BS EN 3155-024:20066 Key 1 Length of crimp

31、well. 2 Point at which a square ended pin, of the same basic diameter as the mating contact, first engages. 3 Mates with 2,57 0,025. 4 End of centre contact. 5 Diameter shall not exceed 7,01 over recovered heat shrink boot. NOTE When mated with contacts conforming to EN 3155-025 the outer contact sh

32、all always mate prior to the centre and intermediate contacts. The mating sequence between centre and intermediate contacts is not guaranteed and therefore does not conform to EN 3155-001 Clause “Engagement sequence“. Figure 1 BS EN 3155-024:20067 Figure 2 Cable ferrule Table 1 Size A Cable style A

33、3,40/3,51 EN 3375-003 B 3,91/4,01 EN 3375-004C 4,14/4,24 EN 3375-005 4.3 Permissible cables 4.3.1 Cable types See Table 2. Table 2 Cable type Specification Single braided cable EN 3375-003 Double braided cable EN 3375-004 High immunity cable EN 3375-005 BS EN 3155-024:20068 4.3.2 Cable stripping See

34、 Figure 3 and Table 3. Key 1 Braid Figure 3 Table 3 Cable stripping Dimensions in millimetres Cable Outer jacket 0,5 Inner conductors 0,2 EN 3375-003 8,0 5,0 EN 3375-004 8,0 5,0 EN 3375-005 8,0 5,0 NOTE Excess cable braid should be trimmed off prior to crimping. No braid should be visible when termi

35、nated. 4.4 Tooling See Table 4. Table 4 Centre contact Intermediate contact Outer crimp sleeveBasic crimp tool M22520/2-01 M22520/5-01 Contact positioner EN 4008-004 N/A N/A Die N/A EN 4008-003Contact installation/Removal tool MIL-I-81969/14-06 BS EN 3155-024:20069 4.5 Tests See Table 5. Table 5 App

36、licable EN 2591- Test Not applicableAccording to EN 3155-001 Remarks 101 Visual examination X 102 Examination of dimensions and mass X 201 Contact resistance - low level X Maximum contact resistance m Contact Initial After tests Centre 55 66 Intermediate 55 66 Outer Not applicable 202 Contact resist

37、ance at rated current X Maximum contact resistance m Room temperature Max. temperature Contact Test current A Initial After cond. 150 C Centre 1 55 66 94 Intermediate 1 55 66 94 Outer 12 6 75 128 204 Discontinuity of contacts in the microsecond range X Method B: Interruption 100 ns during tests EN 2

38、591-402 and EN 2591-403. 206 Measurement of insulation resistance X Method C: Ambient temp. 5 G Maximum temp. 2 G 207 Voltage proof test X Contact Altitude Test voltage Centre/Int. Sea level 1 000 V Inter/outer Sea level 500 V Withstanding voltage at altitude 125 V (rms.) at 4,7 kPa (21 000 m) conti

39、nued BS EN 3155-024:200610 Table 5 (concluded) Applicable EN 2591- Test Not applicableAccording to EN 3155-001 Remarks 210 Electrical overload X 211 Capacitance X 212 Surface transfer impedance X 5 m/ 0,1 100 MHz 213 Shielding effectiveness from 100 MHz to 1 GHz X 301 Endurance at temperature X Meth

40、od B: Duration 1 000 hours. Insulation resistance test 305 Rapid change of temperature X Contacts wired and engaged: TA= 200 C TB= 65 C 306 Mould growth X 307 Salt mist X 315 Fluid resistance X See Table 6. 402 Shock X Method A: Severity 300. 403 Sinusoidal and random vibration X Method B: Figure 3,

41、 Level J. 406 Mechanical endurance X 500 cycles 415 Test probe damage (female contact) X 416 Contact bending strength X 417 Tensile strength (crimped connection) X Centre 35 N Intermediate 35 N Outer 100 N 418 Gauge insertion/extraction forces (female contacts) X Gauge: As defined in Figure 4 and Ta

42、ble 7. Insertion (max.) Extraction (min.) Contact Initial After Cond. Initial After Cond. Intermediate 5,00 N 6,1 N 0,14 N 0,11 N 502 Restricted entry X 503 Contact deformation after crimping X Centre contact only 507 Plating porosity X 508 Measurement of thickness of coating on contacts X The measu

43、red thickness to be recorded. 513 Magnetic permeability X BS EN 3155-024:200611 Table 6 Fluid Immersion Stoving Category References Durationmin Temp. C Temp. C Numberof cycles Fuel JP5 NATO F-44 5+ 2 0 25 85 7 Mineral hydraulic fluid MIL-PRF-5606H NATO H-515 15+ 5 0 85 100 5 Synthetic hydraulic flui

44、d SAE AS 1241 Skydrol 500 B4 Skydrol LD 4 15+ 5 0 85 100 5 Mineral lubricant MIL-PRF-7870C NATO O-142 15+ 5 0 120 125 5 MIL-PRF-23699F NATO O-156 Synthetic lubricant MIL-PRF-7808L NATO O-148 15+ 5 0 150 125 5 MIL-PRF-87937D, diluted 25 % Propanol + 75 % White spirit 15+ 5 0 5 Cleaning products Azeot

45、rope R113 AzM (R113 + methanol) 5+ 2 0 25 25 2 De-icing fluid SAE AMS 1424 NATO S-742 15+ 5 0 50 100 5 Extinguishing fluid Chlorobromethane (less than 0,1 MPa of overpressure) 15+ 5 0 15 25 5 Cooling fluid Coolanol 15+ 5 0 50 25 5 4.6 Gauges See Figure 4 and Table 7. Key 1 Ra0,15 m to 0,25 m Figure

46、4 BS EN 3155-024:200612 Table 7 Gauge A B C R L max. 2,896/2,8935 2,3/2,2 1,5/1,2 0,71/0,58 7,5/7,0 min. 2,847/2,844 2,3/2,2 1,5/1,2 0,71/0,58 7,5/7,0 5 Designation 5.1 Numbering EXAMPLE Description block CONTACT Identity block EN3155-024M08XY Number of this standard Type of contact: M = male Size o

47、f contact Cable ferrule (A, B, C, see Table 1) Accessories (A, B, see Table 8) NOTE If necessary, the code I9005 shall be placed between the classification block and the identity block. 5.2 Accessories See Table 8. Table 8 Type Accessory A Without sealing sleeve B With sealing sleeve (See EN 4530-00

48、2) 6 Marking Marking shall be in accordance with EN 3155-001. 7 Technical specification See EN 3155-001. BS EN 3155-024:2006blankBS EN 3155-024:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards.

49、It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while us