EN 2564-1998 en Aerospace Series - Carbon Fibre Laminates - Determination of the Fibre Resin and Void Contents《航空航天系列 碳纤维层压塑料 纤维成份 树脂成份和气孔成份的测定》.pdf

《EN 2564-1998 en Aerospace Series - Carbon Fibre Laminates - Determination of the Fibre Resin and Void Contents《航空航天系列 碳纤维层压塑料 纤维成份 树脂成份和气孔成份的测定》.pdf》由会员分享，可在线阅读，更多相关《EN 2564-1998 en Aerospace Series - Carbon Fibre Laminates - Determination of the Fibre Resin and Void Contents《航空航天系列 碳纤维层压塑料 纤维成份 树脂成份和气孔成份的测定》.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、STD-BSI BS EN 2564-ENGL 1998 9 1624669 0723285 5-59 9 BRITISH STANDARD AEROSPACE SERIES Carbon fibre laminates - Determination of the fibre, resin and void contents * m * The European Standard EN 2564A998 has the status of a British Standard ICs 49.025.40 NO COPYING WITHOUT ES1 PERMISSION EXCEPT AS

2、PERMITTED BY COPYRIGKT LAW BS EN 2564:1998 STDmBSI BS EN 25b4-ENGL 1998 m Lb24bb7 072328b Li75 m BS EN 2664:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 16 Septe

3、mber 1998 O BSI 19% ISBN O 880 30414 O National foreword This British Standard is the Engiish language version of EN 2564:1998. The UK participation in its prepdon was entrusted to Technical Committee ACWU, Aerospace structural reinforced plastics, which has the responsibility to: - aid enquirem to

4、understand the tee - present to the responsible intemational/European committee any enquiries on the intemretation, or proposals for change, and keep the UK interests - monitor related intemationai and European developments and promuigate informed, them in the UK. A list of organizations represented

5、 on this committee can be obtained on request to its secretar.y Cross-references The British Standards which implement intemationai or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Intemationai Standards Correspondence Inde

6、x”, or by using the “Find” faciMy of the BSI Standards Elecmnic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer

7、immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. Amendments issued since publication AmdNo. ID is the initial mass of the specimen, in grammes is the mass of the sin

8、tered glass crucible, in grammes; is the final total mass of the sintered glass crucible and the residue after acid digestion, in grammes. STD=BSI BS EN 25b4-ENGL 1398 1624667 0723293 625 D Page 7 EN 2564:1998 9.2 Fibre content by volume (Vf) where: Vf Wf pc is the fibre content as a percentage of t

9、he initial volume; is the fibre content as a percentage of the initial mass; is the specimen density, in grammes per cubic centimetre; is the fibre density, in grammes per cubic centimeter, determined to IS0 101 19 or given in the suppliers release report. 9.3 Resin content by mass (Wr) W, = 100 - W

10、f where: W, Wf is the resin content as a percentage of the initial mass; is the fibre content as a percentage of the initial mass. 9.4 Resin content by volume (Vr) v, = (100 - W,) -e Pr where: V, Wf pc fi is the resin content as a percentage of the initial volume; is the fibre content as a percentag

11、e of the initial mass; is the specimen density expressed, in grammes per cubic centimetre; is the density of the cured resin, in grammes per cubic centimetre, determined to IS0 11 83 (method Ai on a cured resin specimen or given in the suppliers release report. STD-BSI BS EN 2564-ENGL 1778 lb29667 0

12、723274 5bL Page 8 EN 2564:1998 9.5 Void content by volume Wo) r 1 where: V, Wf pc pr A is the void content as a percentage of the initial volume; is the fibre content as a percentage of the initial mass; is the specimen density, in grammes per cubic centimetre; is the fibre density, in grammes per c

13、ubic centimetre, determined to IS0 101 19 or given in the suppliers release report; is the density of the cured resin, in grammes per cubic centimetre, determined to IS0 1183 (method A) on a cured resin specimen or given in the suppliers release report. NOTE: The absolute error in the determination

14、of void content is estimated to be f 1 %, due to uncertainties accumulated in the densities. 1 O Designation EXAMPLE: Test method (see 3) I 11 Test report It shall include the following: designation (see 1 O); all data ensuring the traceability of the material (trade mark, identification marking, da

15、te of receipt, batch number, etc.); all information regarding the sampling procedure; specimen dimensions if these differ from 5.1 ; period of conditioning; exposure time at the test atmosphere; the fibre and resin contents by volume and mass and the void content by volume; individual values and ari

16、thmetic means; any incident which may have affected the results. BS EN 25M1998 BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the inte

17、rnaiional level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. W

18、e would be grateful if anyone finding an inaccuracy or ambiguity while using this Brithh Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel 0181 996 9000. Fax: 0181 996 7400. BSI offers members an individual u

19、pdating service ded PLUS which ensures that subscribeis automatically receive the latest editions of standards. Buying standards rders for all BSI, intedonai and foreign standards publications should be addressed to Customer Services. Tel 0181 996 7000. Fax: 0181 996 7001. in response to orders for

20、intedonai standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested Information on standards BSI provides a wide range of information on nalionai, European and intedonai standards through its Library and its Techni

21、cal Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contad the Information Centre. Tel 0181 996 7111. Fax: O181 996 7048. Subscribing members of BSI are kept up to date with standards developments and rece

22、ive substantiai discounts on the purchase price of standards. For details of these and other benefits contact Membemhip Achhknh on. Tel 0181 996 7002. Fax: 0181 996 7001. Copyright Copyright subsists in ail BSI publications. BSI also holds the copynght, in the UK, of the publications of the intedona

23、l stan-on bodies. Except as permitted under the copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retried system or tsansmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. ihis does not pr

24、eclude the free use, in the course of implemening the standard, of necessary details such as symbols, and size, type or grade designations. if these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained if permission is granted, the terms may include royalty payments or a licensing agreement Details and advice can be obtained kom the Copynght Manager. Fel 0181 996 7070.