EN 2240-002-2009 en Aerospace series - Lamps incandescent - Part 002 Main characteristics《航空航天系列 白炽灯 第002部分 主要特征》.pdf

《EN 2240-002-2009 en Aerospace series - Lamps incandescent - Part 002 Main characteristics《航空航天系列 白炽灯 第002部分 主要特征》.pdf》由会员分享，可在线阅读，更多相关《EN 2240-002-2009 en Aerospace series - Lamps incandescent - Part 002 Main characteristics《航空航天系列 白炽灯 第002部分 主要特征》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN2240-002:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Lamps, incandescentPart 002: Main characteristicsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 December2009 BS

2、I 2009ISBN 978 0 580 68632 0Amendments/corrigenda issued since publicationDate CommentsBS EN 2240-002:2009National forewordThis British Standard is the UK implementation of EN 2240-002:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrica

3、l and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard ca

4、nnot confer immunityfrom legal obligations.BS EN 2240-002:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2240-002 November 2009 ICS 49.060 English Version Aerospace series - Lamps, incandescent - Part 002: Main characteristics Srie arospatiale - Lampes incandescence - Partie 002 : Caractri

5、stiques principales Luft- und Raumfahrt - Glhlampen - Teil 002: Haupteigenschaften This European Standard was approved by CEN on 1 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

6、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A versio

7、n in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denm

8、ark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISA

9、TION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2240-002:2009: EBS EN 2240-002:2009EN 2240-002:2009 (E) 2 Foreword This document (EN 2240

10、-002:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Servi

11、ces of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest

12、by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards

13、 organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portug

14、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2240-002:2009EN 2240-002:2009 (E) 3 Contents Page Foreword . 21 Scope 42 Normative references 43 Electrical and photometrical characteristics 44 Forms and positions of filaments 8BS EN 2240-002:2009EN 2240-002:

15、2009 (E) 4 1 Scope This European Standard enumerates and specifies the main characteristics of incandescent lamps for aerospace applications. It should be used together with EN 2240-001 and the associated product standards. 2 Normative references The following referenced documents are indispensable

16、for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2240-0011), Aerospace series Lamps, incandescent Part 001: Technical specification 3 Electrical and

17、 photometrical characteristics See Table 1. Table 1 EN 2240-product standard Code Nominal voltage Nominal current Nominal luminous flux Cap Bulb appearance V A lm 003 44 6,3 0,25 11,3 BA9s/14 Clear 004 47 6,3 0,15 6,5 BA9s/14 Clear 005 73 28 0,02 1 SY4s/7 Clear 006 73E 28 0,02 1 SY4s/7 Clear 007 74

18、6 0,08 2,1 SY4s/7 Clear 008 75 12 0,04 2,1 SY4s/7 Clear 009 83 28 0,04 4 SY4s/7 Clear 010 84 6 0,2 4,5 SY4s/7 Clear 011 85 12 0,08 4 SY4s/7 Clear 012 95 28 0,024 1,9 SY4s/7 Clear 013 301 28 0,17 38 BA15s/19 Clear 014 303 28 0,3 75 BA15s/19 Clear (continued) 1) As well as all parts of EN 2240 quoted

19、in this standard. BS EN 2240-002:2009EN 2240-002:2009 (E) 5 Table 1 (continued) EN 2240-product standard Code Nominal voltage Nominal current Nominal luminous flux Cap Bulb appearance V A lm 015 304 28 0,3 75 BA15d/19 Clear 016 305 28 0,51 188 BA15s/19 Clear 017 306 28 0,51 188 BA15d/19 Clear 018 30

20、7 28 0,67 264 BA15s/19 Clear 019 308 28 0,67 264 BA15d/19 Clear 020 311 28 1,29 628 BA15s/19 Clear 021 313 28 0,17 42 BA9s/14 Clear 022 315 28 0,9 400 BA15s/19 Clear 023 316 6 0,7 44 BA9s/14 Clear 024 327 28 0,04 4,3 SX6s Clear 025 328 6 0,2 4,3 SX6s Clear 026 330 14 0,08 6,3 SX6s Clear 027 334 28 0

21、,04 4,3 S5,7s/8 Clear 028 337 6 0,2 7,5 S5,7s/8 Clear 029 338 2,7 0,06 0,5 SX6s Clear 030 345 6 0,04 0,38 SX6s Clear 031 356 28 0,17 44 BA9s/14 Clear 032 376 28 0,06 4,3 SX6s Clear 033 377 6,3 0,075 2,9 SX6s Clear 034 382 14 0,08 3,8 SX6s Clear 035 387 28 0,04 3,8 SX6s Clear 036 388 28 0,04 3,8 S5,7

22、s/8 Clear 037 394 12 0,04 1,5 SX6s Clear 038 401 28 0,086 8 BA7s/11 Clear 039 600 6,2 4,19 See product standard BAY15s/19 Silvered 040 680 5 0,06 0,38 Without Clear 041 682 5 0,06 0,38 SX4s/4 Clear 042 683 5 0,06 0,63 Without Clear 043 685 5 0,06 0,63 SX4s/4 Clear 044 713 5 0,075 1,13 Without Clear

23、045 714 5 0,075 1,13 SX4s/4 Clear (continued) BS EN 2240-002:2009EN 2240-002:2009 (E) 6 Table 1 (continued) EN 2240-product standard Code Nominal voltage Nominal current Nominal luminous flux Cap Bulb appearance V A lm 046 715 5 0,115 1,9 Without Clear 047 718 5 0,115 1,9 SX4s/4 Clear 048 718 NPC 5

24、0,115 1,9 SX4s/4 Clear 049 757 28 0,08 7,8 BA9s/14 Clear 050 1064 14 0,02 0,57 Without Clear 051 1163 6,2 6,45 See product standard BAY15s/19 Silvered 052 1222 28 0,02 1,25 Without Clear 053 1308 28 0,56 201 BA15s/19 Clear 054 1317 6 0,51 43 BA15s/19 Clear 055 1495 28 0,30 75 BA9s/14 Clear 056 1506

25、6,4 3,28 See product standard BAY15s/19 Silvered 057 1512 14 1,5 See product standard BAY15s/19 Silvered 058 1524 28 0,75 See product standard BAY15s/19 Silvered 059 1591 28 0,61 188 BAY15s/19 Clear 060 1619 6,7 1,9 188 BAY15s/19 Clear 061 1683 28 1,02 400 BA15s/19 Clear 062 1810 6,3 0,4 18,8 BA9s/1

26、4 Clear 063 1815 14 0,2 17,6 BA9s/14 Clear 064 1819 28 0,04 4,3 BA9s/14 Clear 065 1820 28 0,1 20 BA9s/14 Clear 066 1829 28 0,07 12,6 BA9s/14 Clear 067 1843 28 0,022 2,5 BA9s/14 Clear 068 1864 28 0,17 38 BA9s/14 Clear 069 1978 10 10 1 500 Special Clear 070 2232 28 0,643 226 BA15s/19 Clear 071 3011 28

27、 1,29 553 BA15s/19 Clear 072 3912 6 2 142 BA9s/13 Silvered 073 4174 28 1,43 See product standard BAY15s/19 Silvered 074 5086 6 2 142 BA9s/13 Clear (continued) BS EN 2240-002:2009EN 2240-002:2009 (E) 7 Table 1 (concluded) EN 2240-product standard Code Nominal voltage Nominal current Nominal luminous

28、flux Cap Bulb appearance V A lm 075 5448 28 0,41 160 BA9s/13 Clear 076 5678 6 1,67 143 BA9s/13 Clear 077 6832 5 0,06 0,63 Without Clear 078 6838 28 0,024 1,9 Without Clear 079 6839 28 0,024 1,9 SX4s/4 Clear 080 7007-704 28 0,71 380 BA15d/19 Clear 081 7070 28 0,41 133 BA9s/13 Silvered 082 7079 28 1,4

29、3 See product standard BAY15s/19 Silvered 083 7152 5 0,115 1,9 Without Clear 084 7153 5 0,115 1,9 Without Clear 085 7265 5 0,06 1,9 G 1,27 Clear 086 7333 5 0,06 0,63 SX6s Clear 087 7341 28 0,065 8,2 SX6s Clear 088 A7512-12 14 1,86 See product standard BAY15s/19 Silvered 089 A7512-24 28 0,93 See prod

30、uct standard BAY15s/19 Silvered 090 7683 5 0,06 0,63 G 1,27 Clear 091 7714 5 0,075 1,13 G 1,27 Clear 092 7715 5 0,115 1,9 G 1,27 Clear 093 7839 28 0,024 1,9 G 1,27 Clear 094 8022 12 4,2 990 BA20d Clear 095 8552 28 0,02 1,9 Without Clear 096 72601-6 6 4,2 400 BA15s/19 Clear 097 72601-12 12 2,1 400 BA

31、15s/19 Clear 098 416650 28 1,8 750 BA20d Clear 099 416700 28 3,6 1 920 BA20d Clear 100 2078 4 1 56 GX4 Clear 101 404-02 28 0,024 1,9 GX2,54 Clear 102 422F 28 0,171 38 BA7s/11 Frosted 103 51 5 0,115 1,9 SY4s/7 Clear 104 136 28 0,025 1,0 SX6s Clear 105 718BPA 5 0,115 1,9 GX1,27 Clear BS EN 2240-002:20

32、09EN 2240-002:2009 (E) 8 4 Forms and positions of filaments The symbols and abbreviations used are as follows: C : Coiled; CC : Coiled Coil; X : Light centre. The forms and positions of filaments are given in Figures 1 to 7. C-6 CC-6 Key 1 Light centre C-8 CC-8 C-8ZCC-8Z C-8I CC-8I Figure 1 Figure 2

33、 Figure 3 Figure 4 C-2R CC-2R Figure 5 C-2VCC-2V Figure 6 C-2F CC-2F Figure 7 BS EN 2240-002:2009This page has been intentionally left blank BS EN2240-002:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI i

34、s the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure th

35、at they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the

36、identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, internati

37、onal and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to su

38、pply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI e

39、lectronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the

40、 purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is availab

41、le on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a

42、retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: