EN 2045-2001 en Aerospace Series - Square Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Thickness 6 mm Less Than or Equal to a Less Than or Equal to 50 mm -.pdf

《EN 2045-2001 en Aerospace Series - Square Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Thickness 6 mm Less Than or Equal to a Less Than or Equal to 50 mm -.pdf》由会员分享，可在线阅读，更多相关《EN 2045-2001 en Aerospace Series - Square Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Thickness 6 mm Less Than or Equal to a Less Than or Equal to 50 mm -.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES Square bars, drawn, in aluminium and aluminium alloys Tolerance class h 11 Thickne s s oimensions The European Standard EN 2045:2001 has the status of a British Standard ICs 49.025.20; 49.035 BS EN 2045:2001 Wk present to the responsible European committee any enqui

2、ries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s

3、The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue.

4、A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises

5、a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 24 December 2001 ISBN O 580 37991 4 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

6、2045 December 2001 ICs 49.025.20 English version Aerospace series - Square bars, drawn in aluminuim and aluminium alloys - Tolerance class h 11 - Thickness 6 mm I a I 50 mm - Dimensions Srie arospatiale - Barres carres, tires en aluminium et alliages daluminium - Classe de tolrance h 11 - Epaisseurs

7、 6 mm 6 O00 5.1.3 Corner radii See table 4. + 10 O Table 4 Thickness 6a10 10 a 30 30a50 Corner radii r 0,5 0,8 l,o 5.2 Geometric tolerances 5.2.1 Straightness 5.2.1.1 See EN 3848. Method of measurement and symbols Thickness 6a50 5.2.1.2 Tolerances See table 5. Straightness deviation: Y, per metre Y,

8、 on any length X2 a 2 0,6 Table 5 5.2.2 Squareness 5.2.2.1 See EN 3848. Method of measurement and symbol 5 EN 2045:2001 (E) Thickness 6a50 5.2.2.2 Tolerances See table 6. Squareness deviation z 0,005 x a Table 6 Thickness 6a30 30a50 Twist v: per metre on total length 1,5 3 2 4 5.2.3 Twist 5.2.3.1 Se

9、e EN 3848. Method of measurement and symbol 5.2.3.2 Tolerances See table 7. Table 7 5.2.4 Surface flatness 5.2.4.1 Method of measurement See EN 3848. 5.2.4.2 Tolerances The surface flatness tolerance shall be included in the thickness tolerances. 6 BS EN 2045:2001 BSI 389 Chiswick High Road Lon don

10、w4 4AL BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards

11、 should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical co

12、mmittee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards

13、 Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards,

14、 it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exp

15、orters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards devel

16、opments and receive substantial discounts on the purchase price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Sta

17、ndards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permi

18、tted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the cour

19、se of implementing the standard, ofnecessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.