EN 1834-1-2000 en Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1 Grou.pdf

《EN 1834-1-2000 en Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1 Grou.pdf》由会员分享，可在线阅读，更多相关《EN 1834-1-2000 en Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1 Grou.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 STDOBSI BS EN L834-L-ENGL 2000 Lb24bb7 0843877 4OT t3S EN BRITISH STANDARD Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosives amospheres - Part 1: Group II engines for use in flammable gas and vapour atmosphl The

2、European Standard EN 1834-1:2OOO has the status of a British standard ICs 13.230; 27.020 res L834-1:2000 NO COPYING WITBOUT BSI PERMISSION EXCEPT AS PERMIITED BY COPYRIGHT LAW COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI BS EN L834-L-ENGL 2000 = 3b

3、24bb9 0843900 T53 BS EN 1834-1:2000 been prepared under the direction of the sector AmdNo. Date Committee for Engineering, was pubiished under the authority of the Standards Committee and comes into effect on 15 Apni 2000 63 BSI 04-2OOO ISBN O 580 34474 6 National foreword Comments This British Stan

4、dard is the officiai English language version of EN 1834-1:2000. The UK paricipation in its preparation was entrusted by Technicai Committee MCW14, HC engines, to Subcommittee MCWl4/41, Engines to be used in potentidy explosive atmospheres, which has the responsibility to: - aid enquirem to undensta

5、nd the text; - present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related international and European developments and promulgate them in the UK. A list of organktions represented on this subcommtte

6、e can be obtained on request to its secrem. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using th

7、e “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the nece- provisions of a contract Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from lega

8、l obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN titie page, pages 2 to 36, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document waslastissued. L COPYRIGHT European Committee for Sta

9、ndardizationLicensed by Information Handling ServicesSTD=BSI BS EN 1834-1-ENGL 2000 3624669 0841901 978 9 EUROPEAN STANDARD NORME EUROPEENNE EUROP4SCHE NORM EN 1834-1 January 2000 ICs 13.220.60: 27.020 English version Reciprocating internal combustion engines - Safety requirements for design and con

10、struction of engines for use in potentially explosive atmospheres - Part I : Group II engines for use in flammable gas and vapour atmospheres Moteurs alternatifs combustion interne - Prescriptions de scurit pour la conception et la construction des moteurs fonctionnant en atmosphre explosible - Part

11、ie 1: Moteurs du groupe II utiliss dans des atmosphres de gaz et de vapeurs inflammables Hubkolben-Verbrennungsmotoren - Sicherheitsanforderungen fr die Konstruktion und den Bau von Motoren zur Verwendung in explosionsgefhrdeten Bereichen -Teil 1: Motoren der Gruppe II fr Bereiche mit explosionsfhig

12、en Gasen und Dmpfen This European Standard was approved by CEN on 8 July 1999. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl

13、iographical references concerning sich national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three oficial versions (English, French, German). A version in any other language made by traislation under the responsibility of

14、 a CEN member into its own language and notified to the Central Secretariat has the same status as he official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Nor

15、way, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE FUR NORMUNG Central Secretariat: rue de Stassart, 36 8-1050 Brussels O 2000 CEN All rights of exploitation in any form and by any means reserved w

16、orldwide for CEN national Members. Ref. No. EN 1834-1 :2000 E COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesPage 2 EN 1834-1 12000 Contents Foreword O Introduction 1 Scope 2 Normative references . 3 Definitions . 4 List of hazards 5 Safety requirements andl

17、or measures . 6 Verification of the safety requirements andlor measures . 7 Information for use . 8 Marking - Annex A (informative) Engine conditions and ignition sources Annex B (informative) Exhaust flame arrester elimination test procedure Annex C (informative) Relation between zones and engines

18、categories Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives 3 3 3 4 5 7 8 18 27 29 30 33 35 36 O BSI 04-2000 COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI BS EN 3834-3-EN

19、GL 2000 lb24bb9 0843903 7b0 Page 3 EN 1834-1 :2000 Foreword This European Standard has been prepared by Technical Committee CEN/TC 270, Internal combustion engines, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication

20、 of an identical text or by endorsement, at the latest by July 2000, and conflicting national standards shall be withdrawn at the latest by July 2000. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and support

21、s essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro

22、pean Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. The standards prepared by CENTTC 270 are specific to internal combustion engines and supp

23、lement those A and B standards concerned with safety. Normative and informative annexes to this standard are indicated in the contents list. General Safety requirements for internal combustion engines are given in EN 1679-1:1998. O Introduction This European Standard has been prepared to be a harmon

24、ized standard to provide one means of conforming with the essential safety requirements of the Machinery (98/37/EEC) and ATEX (94/9/EEC) Directives, and associated EFTA regulations. This European standard is a type C standard as defined in EN 292:1991. The extent to which hazards are covered are ind

25、icated in the scope of this standard. In addition, machinery shall comply as appropriate with part I and 2 of EN 292:1991 for hazards which are not covered by this standard. The requirements of this standard apply to designers, manufacturers, suppliers and importers of reciprocating internal combust

26、ion engines. This standard also contains the information to be provided by the manufacturer to the user of reciprocating internal combustion engines. 1 Scope This European Standard specifies the safety requirements and/or measures to remove the hazards and limit the risks on reciprocating internal c

27、ombustion compression ignition engines hereinafter referred to as engines of group II categories 2 and 3 for use in potentially explosive atmospheres of flammable gas and vapour. This European Standard does not apply to flammable gas and vapour atmospheres containing carbon disulphide (CS2). Q BSI 0

28、4-2000 - COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI BS EN L834-L-ENGL 2000 M Lb24bb9 0843904 bT7 Page 4 EN 1834-1 :2000 This European Standard does not define requirements relating to the driven machinery. These requirements can be found in the a

29、ppropriate application standards. This European standard does not apply to engines used in premises for the processing manufacture or storage of explosives. The safety requirements for engines for use in potentially explosive atmospheres for underground applications are given in EN 1834-2:ZOOO. The

30、safety requirements for engines for used in explosive atmospheres with combustible dust are given in EN 1834-32000. I This European Standard does not apply to spark ignition engines. The hazards applicable are listed in clause 4 and relate to the additional hazards of operation in an atmosphere that

31、 may become explosive. The tests which the engine and its ancillary fittings are required to undergo to verify compliance with this specification are detailed in this standard. General safety requirements .e. those common to all RIC engines, are covered in EN 1679-1 1998. This European Standard is a

32、pplicable to engines which are manufactured after the date of issue of this standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publi

33、cations are listed hereafter. For dated references, subsequent amendments to or revisions of, any of these publications apply to this European standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 292-1 Sa

34、fety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology EN 292-2:1991/+Al:1995 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications EN 1050 Safety of machinery - Principles for risk as

35、sessment EN 1127-1 1997 Explosive atmospheres - Explosion prevention and protection - Part 1 : Basic concepts and methodology EN 1679-1 1998 Reciprocating internal combustion engines - Safety - Part I: Compression ignition engines EN 1834-3 2000 Reciprocating internal combustion engines - Safety req

36、uirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres 1991 1996 Q BSI 04-2000 COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI BS EN L834-L-ENGL 20

37、00 = Lb24bb9 0841905 533 EN 50014 EN 50015 EN 50016 EN 50017 EN 50018 EN 50019 EN 50020 prEN 50021 EN 50028 EN 50039 prEN 50154 IS0 1813 IS0 271 O IS0 3046-3 IS0 7967-1 IS0 7967-2 IS0 7967-3 IS0 7967-4 IS0 7967-8 IS0 9563 IEC 60243-1 1997 1994 1995 1994 1994 1994 1994 1998 1987 1980 1993 1979 1978 1

38、989 1987 1987 1987 1988 1994 1990 1996 Page 5 EN 1834-1 12000 Electrical apparatus for potentially explosive atmospheres - General requirements Electrical apparatus for potentially explosive atmospheres - Oil immersion o Electrical apparatus for potentially explosive atmospheres - Pressurized appara

39、tus p Electrical apparatus for potentially explosive atmospheres - Powder filling q Electrical apparatus for potentially explosive atmospheres - Flameproof enclosures d Electrical apparatus for potentially explosive atmospheres - Increased safety e Electrical apparatus for potentially explosive atmo

40、spheres - Intrinsic safety I Electrical apparatus for potentially explosive atmospheres - Type of protection n Electrical apparatus for potentially explosive atmospheres - Encapsulation m Electrical apparatus for potentially explosive atmospheres - Intrinsic safety systems I Electrical installations

41、 in potentially explosive gas atmospheres (other than mines) Antistatic endless V belts - Electrical conductivity - Characteristics and method of test Reciprocating internal combustion engines - Vocabulary Reciprocating internal combustion engines - Performance - Part 3: Test measurements Reciprocat

42、ing internal combustion engines - Vocabulary of components and systems - Part 1 : Structure and external covers Reciprocating internal combustion engines - Vocabulary of components and systems - Part 2: Main running gear Reciprocating internal combustion engines - Vocabulary of components and system

43、s - Part 3: Valves, camshaft drive and actuating mechanisms Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and aidexhaust gas ducting systems Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Start

44、ing systems Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test method Methods of test for electric strength of solid insulating materials - Part 1 : Tests at power frequencies 3 Definitions For the purposes of this standard, the definitions in IS

45、0 2710:1978 and IS0 7967-1:1987, IS0 7967-2:1987, IS0 7967-3: 1987, IS0 7967-4:1988 and IS0 7967-8: 1994 and the following definitions apply: O BSI 04-2000 COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services STDaBSI BS EN LB34-L-ENGL 2000 D Lb24669 0843qOb 47T P

46、age 6 3.1 Explosive atmosphere A mixture with air, under atmospheric conditions of combustible material in the form of gas, vapour, mist or dust, in which after ignition, combustion spreads throughout the unconsumed mixture NOTE: See 3.15 in EN 1127-1:1997. For the purposes of this standard dust is

47、excluded. EN 1834-1 :2000 3.2 Zones for gas and vapour The definitions given in 6.4.2 of EN 1 127-1 :I 997 apply 3.3 Potentially explosive atmosphere An atmosphere which could become explosive due to local and operational conditions 3.4 Categories Category 2 and 3 of equipment group II are defined i

48、n annex 1 of the ATEX Directive. In the meaning of ATEX directive RIC engines are equipments. NOTE: The letter G is included to identify engines designed according to this European Standard 3.5 Temperatures 3.5.1 Ignition temperature of an explosive atmosphere The definition is given in 3.28 of EN 1

49、127-1:1997 3.5.2 Maximum surface temperature The highest temperature attained under the most adverse operating conditions of the external surfaces to which the surrounding atmosphere has access. This includes the engine, its fittings, its ancillary equipments including flameproof enclosure, flame arrester, spark arrester, ducts, etc 3.5.3 Maximum temperature The maximum temperature is the greatest under the most adverse operating conditions of: a) the maximum surface temperature as defined in 3.5.2, b) the maximum gas temperature of: - the ex