EN 1729-1-2006 9702 Furniture - Chairs and tables for educational institutions - Part 1 Functional dimensions《家具 教育机构用桌椅 第1部分 功能尺寸》.pdf

《EN 1729-1-2006 9702 Furniture - Chairs and tables for educational institutions - Part 1 Functional dimensions《家具 教育机构用桌椅 第1部分 功能尺寸》.pdf》由会员分享，可在线阅读，更多相关《EN 1729-1-2006 9702 Furniture - Chairs and tables for educational institutions - Part 1 Functional dimensions《家具 教育机构用桌椅 第1部分 功能尺寸》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 1729-1:2006Furniture Chairs and tables for educational institutions Part 1: Functional dimensionsThe European Standard EN 1729-1:2006 has the status of a British StandardICS 97.140g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g

2、40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 1729-1:2006This British Standard was published under the authority of the Standards Policy and Strate

3、gy Committee on 31 January 2007 BSI 2007ISBN 978-0-580-49922-7National forewordThis British Standard was published by BSI. It is the UK implementation of EN 1729-1:2006. It supersedes BS 5873-1:1980, BS 5873-2:1991 and DD ENV 1729-1:2001, which are withdrawn.The UK participation in its preparation w

4、as entrusted to Technical Committee FW/0, Furniture.A list of organizations represented on FW/0 can be obtained on request to its secretary.The National Annex NA (informative) provides additional guidance for users in the UK.This publication does not purport to include all the necessary provisions o

5、f a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEA

6、N STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1729-1July 2006ICS 97.140 Supersedes ENV 1729-1:2001 English VersionFurniture - Chairs and tables for educational institutions - Part 1:Functional dimensionsMeubles - Chaises et tables pour les tablissementsdenseignement - Partie 1: Dimensions fonctionnelle

7、sMbel - Sthle und Tische fr Bildungseinrichtungen - Teil1: FunktionsmaeThis European Standard was approved by CEN on 12 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standar

8、d without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other langua

9、ge made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,German

10、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManage

11、ment Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1729-1:2006: ELicensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 2 Conte

12、nts Page Foreword. 3 Introduction 4 1 Scope . 5 2 Terms and definitions. 5 3 Functional dimensions for chairs and tables 7 4 Marking 8 5 Instructions . 8 Annex A (normative) Functional dimensions for chairs with slopes between -5 and + 5 and associated tables 9 A.1 Functional dimensions and size mar

13、ks for chairs 9 A.2 Functional dimensions and size marks for tables 14 A.3 Legroom. 14 A.4 Requirements for adjustable chairs and tables. 15 Annex B (normative) Functional dimensions for high chairs with double-slope seats and associated tables 17 B.1 Functional dimensions and size marks17 B.2 Funct

14、ional dimensions and sizemarks for tables . 20 B.3 Legroom. 21 B.4 Requirements for adjustable chairs and tables. 22 Annex C (normative) Functional dimensions for standing height tables. 23 Annex D (informative) Guidance to the calculation of the height of adjustable chairs and tables in Annex A . 2

15、4 Annex E (informative) Guidance to the calculation of the height of chairs and tables in Annex B. 26 E.1 Introduction . 26 National Annex NA (informative) Additional guidance for users in the UK 28 Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:

16、2006 (E) 3 Foreword This European Standard (EN 1729-1:2006) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,

17、 at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. This European Standard supersedes ENV 1729-1:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impl

18、ement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Unite

19、d Kingdom. Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 4 Introduction This part of this European Standard is based on the principle that chairs and tables, intended for use in educational institutions for general-purpose education, sh

20、ould be designed to encourage good postures. This part of the standard takes selected national standards into consideration. It does not specify design, but only those dimensions, which promote good posture for either fixed height or adjustable furniture. The dimensional requirements of this standar

21、d permit various interpretations of design; hence customs, educational practices, technical and financial circumstances of individual countries can be satisfied. The minimum dimensions specified are considered as the absolute minimum. Consequently, it is recommended to exceed these. It does not prov

22、ide dimensional requirements for arm rests, but it does not preclude the use of armrests. Part 2 of this standard specifies safety requirements and test methods. Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 5 1 Scope This part of Europ

23、ean Standard EN 1729 specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as standing work height tables for use without chairs. It applies to furniture for use with

24、laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops. The standard does not apply to furniture used by teaching personnel. 2 Terms and definitions For the purposes of this European Standard, the following terms and definitions

25、 apply. 2.1 median plane vertical plane passing through the geometric centre of the seat, dividing the seat from side to side into two equal parts (see Figure 1) 2.2 transverse plan vertical plane perpendicular to the median plane passing through the geometric centre of the seat, dividing the seat f

26、rom front to rear (see Figure 1) Key 1 Transverse plane 2 Median plane Figure 1 Illustration of the median and transverse planes Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 6 2.3 foremost point of the backrest (Point S) foremost point

27、 of the backrest on the median plane (see Figures A.2 and B.2). For an adjustable, tilting or pivoting backrest, the Point S shall be determined when the backrest is vertical or as near vertical as possible. (see Figures A.3, A.4 and B.3) 2.4 adjustable furniture furniture that can be adjusted from

28、a seated position by the users (pupils), without the need for tools or excessive force 2.5 multi-size furniture furniture, which is adjustable at installation (not by the users) to change dimensions from one size mark to another 2.6 double sloped seat seat intended for seating using either the front

29、 part of the seat (leaning forward) or using the rear part of the seat (leaning backward), with the feet resting on a footrest or the floor (see Figures 5 and B.3) 2.7 inclination of a single sloped seat and of the front part of a double sloped seat () angle formed by the front part of the seat and

30、the horizontal. It is measured on the median plane, at the angle between the horizontal and the line passing through the upper part of the front edge and the corresponding point at the rear part of the seat (for single sloped seats) or at the top point of the seat (for double sloped seats) (see Figu

31、res 2, 3, 4 and 5) () - is negative for rearwards sloping seats () + is positive for forwards sloping seats 2.8 inclination of the rear part of a double sloped seat () angle formed by the rear and horizontal part of the seat, determined in the median plane (see Figure 5) 2.9 inclination of the back

32、rest () angle on the median plane between the horizontal and the overall front surface of the back rest above Point S Key 1 Front 2 = 0 to 5 Figure 2 - Example of measuring the angle of a single sloped seat with a negative seat angle Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, U

33、ncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 7 Key 1 Front 2 = 0 to + 5 Figure 3 - Example for measuring the angle of a single sloped seat with a positive seat angle Key 1 Front 2 = 0 to + 5 3 = 0 to 5 Figure 4 - Examples for measuring the angle of a single sloped tiltable seat Key 1 Front 2 = 0 to +

34、 15 3 = 0 to 5 Figure 5 - Example for measuring the angle of a double sloped seat (See Annex B) 3 Functional dimensions for chairs and tables The functional dimensions and corresponding size marks and colour codes for chairs and tables shall be as specified in the normative Annexes A or B. The funct

35、ional dimensions of standing height tables shall be as specified in normative Annex C. Adjustable and multi-size furniture shall fulfil the requirements specified in Annexes A, B or C. Licensed Copy: Wang Bin, na, Wed Apr 04 07:47:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 8 The

36、 stature and popliteal height ranges in Tables A.1, A.2, B.1, B.2 and C.1 do not include any allowance for shoes. All chair and table heights include an allowance for shoes. 4 Marking The marking of fixed and adjustable chairs and tables shall be legible and indelible and shall include at least the

37、following information: a) size mark or colour code or both, as specified in Annexes A ,B or C; b) marking on adjustable furniture of the size marks covered; c) name and/or trade name and/or mark and address of the manufacturer or his or her authorised representative in full or in abbreviated form, p

38、rovided the abbreviation enables the manufacturer and/or his or her authorised representative to be identified; d) date of production by stating at least the year and month of production. 5 Instructions The instructions shall be submitted with the furniture in the official languages(s) of the countr

39、y where the furniture is sold. It can be given either affixed to the furniture, on a label, in a leaflet or in the instructions for use. It shall include at least the following: a) Size mark reference: size mark identification shall be referenced to this European standard; b) Maintenance instruction

40、s: including information on surface finish properties, maintenance and cleaning; c) Installation instructions for multi-size furniture: instructions on how to adjust the furniture to fit a specific group of pupils; d) Adjustability information: instructions for the users (pupils) of adjustable furni

41、ture shall include information on how to operate the adjustments and information on how to recognise correct settings and therefore a good posture. NOTE Use of appropriate drawings or pictures should reinforce the information in the instruction leaflets. Licensed Copy: Wang Bin, na, Wed Apr 04 07:47

42、:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 1729-1:2006 (E) 9 Annex A (normative) Functional dimensions for chairs with slopes between -5 and + 5 and associated tables A.1 Functional dimensions and size marks for chairs The dimensions, angles, size marks and colour codes for chairs shall be as

43、given in Table A1. The front edge of the seat shall be well rounded in the median plane. The front part of the seat may be curved in the median plane. The upper and the lower edge of the backrest shall be rounded. Room for free movement of the buttocks shall be ensured. If the backrest extends below

44、 Point S, it shall be angled rearwards such as to maintain the buttock clearance zone as shown in Figure A.2. The side of the chair or seat shall not be raised to form a ridge higher than 15 mm than any lower point of the seat surface in the transverse direction of the seat. The determination of the

45、 functional dimensions of chairs is specified below. See also Figures A.1 to A.5. If the seat and/or back rest is adjustable or tiltable, the seat shall be set to horizontal or as close as possible and the back rest shall be set to vertical or as close as possible. (h8) The height of the seat is det

46、ermined on the median plane. It is the vertical distance between the front of the seat and the ground. See Figures A.3 and A.4. (t4) The effective depth of seat is determined on the median plane as the horizontal distance between the front edge of the seat and the vertical projection from point S. S

47、ee Figures A.1 to A.4. (b3) The width of the seat is determined as the horizontal distance between vertical lines through the side edges of the seat surface at a distance equal to half of t4. See Figures A.1 and A.2. (h6) The height of the foremost point of the backrest (Point S) is determined on th

48、e median plane. It is the vertical distance between the foremost point of the backrest and the seat surface. See Figures A.3 and A.4. (h7) The height of the backrest is a vertical distance determined on the median plane. Point S must fall within this distance. See Figures A.3 and A.4. (b4) The width

49、 of the backrest is the greatest horizontal distance between its side edges. See Figure A.1. (r2) The horizontal radius of the backrest is determined on the horizontal plane, at the same height as the Point S. See Figure A.1. (t5) The depth of the front part of the seat is determined on the median plane. It is the horizontal distance between the front edge of the seat and the apex of the seat. See Figure B.3. (t6) The depth of the rear part of the seat is determined on the median plane. It is the horizontal distance between the fore