EN 1677-4-2000 en Components for slings - Safety - Part 4 Links Grade 8 (Incorporates Amendment A1 2008)《吊重装置组件 安全 第4部分 8级铰链 包含修改件A1-2008》.pdf

《EN 1677-4-2000 en Components for slings - Safety - Part 4 Links Grade 8 (Incorporates Amendment A1 2008)《吊重装置组件 安全 第4部分 8级铰链 包含修改件A1-2008》.pdf》由会员分享，可在线阅读，更多相关《EN 1677-4-2000 en Components for slings - Safety - Part 4 Links Grade 8 (Incorporates Amendment A1 2008)《吊重装置组件 安全 第4部分 8级铰链 包含修改件A1-2008》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull

2、nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnull nullnull nullnullnulln

3、ullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull

4、nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnull null nullnullnullnullnullnull nullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnu

5、ll nullnull nullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnul

6、lnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnull30 April 2009 Implementation of CEN amendment A1:2008nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnul

7、lnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull null nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnul

8、lnullnullnull nullnullnull nullnull null nullnull nullnullnull nullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnu

9、llnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnull nullnull nullnullnullnullnullnull nullnullnull nullnull nullnullnull nullnullnullnullnull null nullnullnull nullnull nullnullnullnullnullnullnullnullnull nullnull nullnullnullnulln

10、ullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnull nullnull null null nullnullnullnullnullnullnullnullnullnull nullnullnullnull nullnull nullnullnullnull nullnullnull nullnullnullnull nullnullnullnullnullnullnullnullnullnullnull nullnull nullnullnullnull nullnu

11、llnullnullnullnullnullnullnull nullnull nullnull nullnullnullnull nullnullnull nullnull nullnullnullnullnullnullnull nullnullnullnullnull nullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnulln

12、ullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnull null null nullnullnullnullnullnullnullnullnullnullnull nullnullnull nullnullnullnullnullnullnullnullnullnu

13、ll null nullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnull null nullnullnullnullnullnullnull nullnullnullnullnullnullnullnull nullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnull

14、nullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnul

15、lnullnullnullnullnullnullnull nullnullnullnull nullnullnullnullnullnullnull nullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnull null

16、nullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnull nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull nullnullnullnull nullA1A1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1677-4:2000+A1 November 2008 ICS 53.020.30 Supersedes EN 1677-4:2000 Englis

17、h Version Components for slings - Safety - Part 4: Links, Grade 8 Accessoires pour lingues - Scurit - Partie 4: Mailles, Classe 8 Einzelteile fr Anschlagmittel - Sicherheit - Teil 4: Einzelglieder, Gteklasse 8 This European Standard was approved by CEN on 30 September 2000 and includes Amendment 1 a

18、pproved by CEN on 9 September 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nat

19、ional standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and

20、 notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

21、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T E U R O P E N D E N O R M A LI S A T I O N EUR OP IS C HES KOM ITEE FR NOR M UNG Management Centre: rue de Stassart, 36 B-1050

22、 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1677-4:2000+A1:2008: EEN 1677-4:2000+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Hazards .6 Ta

23、ble 1 Hazards and associated requirements.7 5 Safety requirements 7 5.1 Design .7 5.2 Dimensions.7 Table 2 Internal length and width of parallel sided master links 7 5.3 Materials and heat treatment8 Table 3 Sulfur and phosphorous content8 Table 4 Chemical composition - alloying elements8 5.4 Manufa

24、cturing methods and workmanship 9 5.5 Mechanical properties.10 Table 5 Working load limits.11 6 Verification of safety requirements11 6.1 Qualification of personnel 11 6.2 Type tests and examination12 Figure 1 Test pieces.13 Figure 2 Bend test equipment.13 6.3 Manufacturing examination14 6.4 Manufac

25、turing tests.14 6.5 Manufacturing test regime (forged links)15 Table 6 Number of links in a lot 15 6.6 Manufacturing test regime (welded links).16 7 Marking .17 7.1 Links17 7.2 Load bearing pins17 8 Manufacturers certificate .17 9 Instructions for use .18 Annex ZA (informative) !Relationship between

26、 this European Standard and the Essential Requirements of EU Directive 98/37/EC“.19 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.20 BS EN 1677-4:2000+A1:2008EN 1677-4:2000+A1:2008 (E) 3 Foreword This document (EN 1677-

27、4:2000+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen

28、t, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document supersedes EN 1677-4:2000. This document includes Amendment 1, approved by CEN on 2008-09-09. The start and finish of text introduced or altered by amendment is indicated

29、 in the text by tags !“. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which

30、are integral parts of this document.“ It is a Part of a products standard related to safety for components for slings. The other Parts of EN 1677 for components for slings are: Part 1: Forged steel components - Grade 8 Part 2: Forged steel lifting hooks with latch - Grade 8 Part 3: Forged steel self

31、-locking hooks - Grade 8 Part 5: Forged steel lifting hooks with latch - Grade 4 Part 6: Links - Grade 4 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypru

32、s, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 1677-4:2000+A1:2008EN 1677-4:2000+A1

33、:2008 (E) 4 Introduction This European standard has been prepared to be a harmonized standard providing one means of complying with the essential safety requirements of the Machinery Directive and associated EFTA regulations. The links covered by this Part of EN 1677 are normally supplied to be part

34、 of a sling, but they may also be used for other applications. In such instances it is important that the link design is checked to ensure its fitness for the intended use. The extent to which hazards are covered is indicated in the scope. In addition, lifting equipment shall conform as appropriate

35、to EN 292 for hazards that are not covered by this standard. 1 Scope This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in: chain slings according t

36、o EN 818-4 steel wire rope slings textile slings according to EN 1492-1:2000, EN 1492-2:2000. intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged links. The hazards covered by this Part of EN 1677 are identified in clause 4. !Annexes ZA and ZB give th

37、e relationship with EU-Directives.“ 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated reference

38、s, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-1, Safety of machinery - Basic

39、concepts - General principles for design - Part 1: Basic terminology, methodology EN 292-2:1991/A1:1995, Safety of machinery - Basic concepts - General principles for design - Part 2: Technical principles and specifications (Amendment 1: 1995) EN 818-4:1996, Short link chain for lifting purposes Saf

40、ety - Part 4: Chain slings - grade 8 EN 818-6:2000, Short link chain for lifting purposes Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer. EN 1050:1996, Safety of machinery - Principles of risk assessment. BS EN 1677-4:2000+A1:

41、2008EN 1677-4:2000+A1:2008 (E) 5 EN 1492-1:2000, Textile slings Safety - Part 1: Flat woven webbing slings made of man-made fibres EN 1492-2:2000, Textile slings Safety - Part 2: Round slings made of man-made fibres EN ISO 9002:1994, Quality systems - Model for quality assurance in production, insta

42、llation and servicing EN 10002-2:1991, Metallic materials - Tensile test - Part 2: Verification of the force measuring system of the tensile testing machine EN 10025:1990/A1:1993, Hot rolled products of non-alloy structural steels Technical delivery conditions EN 10228-1:1999, Non-destructive testin

43、g of steel forgings - Part 1: Magnetic particle inspection EN 10228-2:1998, Non-destructive testing of steel forgings - Part 2: Penetrant testing EN 45012, General criteria for certification bodies operating quality system certification ISO 643 Steels, Micrographic determination of the ferritic or a

44、ustenitic grain size 3 Terms and definitions For the purposes of this Part of EN 1677, the following terms and definitions apply. 3.1 working load limit (WLL) maximum mass that a link is authorized to sustain in general lifting service. NOTE This term has the same meaning as the term maximum working

45、 load used in annex A of EN 292-2:1991/A1:1995. 3.2 manufacturing proof force (MPF) force applied to the link during the manufacturing proof test. 3.3 breaking force (BF) maximum force reached during the static tensile test of the link at the end of which the link fails to retain the load. 3.4 sling

46、 assembly consisting of chain, wire rope or textile joined to upper and lower terminals suitable for attaching loads to the hook of a crane or other lifting machine. 3.5 master link link forming the upper terminal of a sling by means of which the sling is attached to the hook of a crane or other lif

47、ting machine. 3.6 intermediate master link link used to connect one or two legs of a sling to a master link. 3.7 master link assembly assembly consisting of a master link together with two intermediate master links. BS EN 1677-4:2000+A1:2008EN 1677-4:2000+A1:2008 (E) 6 3.8 lower terminal link, hook

48、or other device fitted at the end of a leg of a sling, remote from the master link or upper terminal. 3.9 traceability code series of letters and/or numbers marked on a link that enable its manufacturing history, including the identity of the cast of steel used, to be traced. 3.10 lot specified numb

49、er of links from which samples are selected for testing purposes and that have been manufactured from the same cast of steel and subjected to the same heat treatment process. 3.11 integral joining device means of connection that does not depend on welding and is integrated with the link. 3.12 total ultimate elongation total extension at the point of fracture of the link expressed as a percentage of the internal length of the