EN 14187-5-2003 en Cold applied joint sealants - Part 5 Test method for the determination of the resistance to hydrolysis《低温用接缝密封剂 第5部分 抗水解性测定的试验方法》.pdf

《EN 14187-5-2003 en Cold applied joint sealants - Part 5 Test method for the determination of the resistance to hydrolysis《低温用接缝密封剂 第5部分 抗水解性测定的试验方法》.pdf》由会员分享，可在线阅读，更多相关《EN 14187-5-2003 en Cold applied joint sealants - Part 5 Test method for the determination of the resistance to hydrolysis《低温用接缝密封剂 第5部分 抗水解性测定的试验方法》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14187-5:2003 Cold applied joint sealants Part 5: Test method for the determination of the resistance to hydrolysis The European Standard EN 14187-5:2003 has the status of a British Standard ICS 93.080.20 BS EN 14187-5:2003 This British Standard, was published under the authori

2、ty of the Standards Policy and Strategy Committee on 19 June 2003 BSI 19 June 2003 ISBN 0 580 42093 0 National foreword This British Standard is the official English language version of EN 14187-5:2003. The UK participation in its preparation was entrusted by Technical Committee B/510, Road material

3、s, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to i

4、n this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of

5、a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or propo

6、sals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright date displaye

7、d in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN141875 June2003 ICS93.080.20 Englishversion ColdappliedjointsealantsPart5:Testmethodforthe determinationoftheresistancetohydrolys

8、is MasticspourjointsappliqusfroidPartie5:Mthodes dessaipourladterminationdelarsistancelhydrolyse KaltverarbeitbareFugenmassenTeil5:Prfverfahrenzur BestimmungderBestndigkeitgegenHydrolyse ThisEuropeanStandardwasapprovedbyCENon25March2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulation

9、swhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(Eng

10、lish,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece,

11、Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationin

12、anyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN141875:2003EEN141875:2003(E) 2 Contents page Foreword3 1 Scope 3 2 Normativereferences 3 3 Termsanddefinitions. .4 4 Principle4 5 Apparatusandmaterials. 4 6 Preparationoftestspecimens. .4 7 Conditioning.4 8 Procedure .4 9 Testrepo

13、rt . .5EN141875:2003(E) 3 Foreword Thisdocument(EN141875:2003)hasbeenpreparedbyTechnicalCommitteeCEN/TC227“Roadmaterials“,the secretariatofwhichisheldbyDIN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyDecember2003,and

14、conflictingnationalstandardsshallbewithdrawnatthelatest byMarch2005. ThisEuropeanStandardisoneofaseriesofstandardsaslistedbelow: EN141871, ColdappliedjointsealantsPart1:Testmethodforthedeterminationoftherateofcure. EN141872, ColdappliedjointsealantsPart2:Testmethodforthedeterminationoftackfreetime.

15、EN141873, ColdappliedjointsealantsPart3:Testmethodforthedeterminationofselflevellingproperties . EN141874, ColdappliedjointsealantsPart4:Testmethodforthedeterminationofthechangeinmassand volumeafterimmersionintestfuel. EN141875,Coldappliedjointsealants Part 5:Testmethodforthedeterminationoftheresist

16、anceto hydrolysis. EN141876, ColdappliedjointsealantsPart6:Testmethodforthedeterminationoftheadhesion/cohesion propertiesafterimmersioninchemicalliquids. EN141877, ColdappliedjointsealantsPart7:Testmethodforthedeterminationoftheresistancetoflame . EN141878, ColdappliedjointsealantsPart8:Testmethodfo

17、rthedeterminationoftheartificialweatheringby UVirradiation . prEN141879, ColdappliedjointsealantsPart9:Functiontest . 1) NoexistingEuropeanStandardissuperseded. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStanda

18、rd:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal, Slovakia,Spain,Sweden,SwitzerlandandtheUnitedKingdom. 1Scope ThisEuropeanStandarddescribesatestmethodfordeterminingtheresistancetohydrolysisofcoldapplie

19、djoint sealantsaftertreatmentatelevatedtemperatureandhighhumidity. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesinthetext,andthepublicationsarelistedhereafter.For 1) Inpreparatio

20、n.EN141875:2003(E) 4 datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN26927:1990, BuildingconstructionJoint

21、ingproductsSealantsVocabulary(ISO6927:1981). ENISO868,PlasticsandeboniteDeterminationofindentationhardnessbymeansofadurometer(shore hardness)(ISO868:2003). 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thetermsanddefinitionsgiveninEN26927:1990apply. 4Principle Testspecimenofthecoldappli

22、edjointsealantispreparedinaroundmouldandtreatedfor14daysinan autoclaveatelevatedtemperatureandhighhumidity.Thehardnessofthetestspecimenisrecordedbeforeand aftertreatmentathighhumidityandtemperature. 5 Apparatusandmaterials 5.1 Roundmouldsofpolyethylene,withadiameterof50mmto70mmandadepthof10mm. 5.2 A

23、utoclavefromstainlesssteel,fortreatmentofthespecimensofthecoldappliedjointsealantatelevated temperatureandhighhumidity. 5.3 Convectiontypeoven,controllablebetween60Cto100Candaccurateto2C. 5.4 ApparatusforthemeasurementofShoreAhardnessconformingtoENISO868. 6 Preparationoftestspecimens Cleantheroundmo

24、ulds(see5.1)andfillwithsealantpreviouslyconditionedfor24hat(232)C.Thetestis carriedoutwitheachthreetestspecimens. Thefollowingprecautionsshallbetaken: avoidtheformationofairbubbles; trimthesealantsurfacesothatitisflushwiththeborderoftheroundmould. 7Conditioning Conditionthetestspecimenfor28daysat(23

25、2)Cand(505)%relativehumiditytoallowthecompletecure. 8Procedure 8.1 Testtemperature Carryoutthetestatthefollowingtemperatures:EN141875:2003(E) 5 (602)C; (702)C; (802)C. 8.2 Testperiod Testoveraperiodof14days. 8.3 Testprocedure Aftertheconditioningofthetestspecimen,determineitshardness(ShoreAhardness)

26、inaccordancewithEN ISO868(referencevalue).Filltheautoclave(see5.2)withwatersothatthereisalayerofwaterbetween20mm and50mmonthebottom.Placethespecimensintotheautoclavewithasupportsothattheydonottouchthe water.Closetheautoclave(see5.2)andplaceitintotheconvectiontypeoven(see5.3)for14days.Duringthis time

27、thelevelofthewateriscontrolledregularly. Afterthistimetakethespecimensfromtheautoclave(see5.2)andconditionthemfor24hat(232)Cand subjectthemtothetestofShoreAhardnessinaccordancewithENISO868. 8.4 Calculationandexpressionofresults Calculatetheresistancetohydrolysis, D H,expressedinpercentageinrelationt

28、othereferencevalue,usingthe followingequation: 100 2 1 = D H H H (1) where D H istheresistancetohydrolysis,expressedinpercent(%); H 1 isthearithmeticmeanofthehardnessShoreAofthetestspecimensbeforethetestprocedure; H 2 isthearithmeticmeanofthehardnessShoreAofthetestspecimensafterthetestprocedure. 9 T

29、estreport Thetestreportshallincludethefollowinginformation: a) referencetothisEuropeanStandard; b) nameandtypeofthecoldappliedjointsealant; c) batchofsealantfromwhichthetestspecimenswereproduced; d) timeofconditioningofthetestspecimens; e) conditioningtemperatureofthetestspecimens; f) valueoftheresi

30、stancetohydrolysis;detailsofanychangeofthespecimen; g) anydeviationsfromthespecifiedtestconditions; h) dateoftest.BS EN 14187-5:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It present

31、s the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI t

32、o improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996

33、 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer

34、Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Stan

35、dards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on

36、 all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these a

37、nd other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI w

38、ebsite at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a re

39、trieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.